You may also like
SATCO Lighting S29401 6.5W, PAR20 LED, 3000K, 25 degree Beam Angle, Medium Base, 120V
6.5 Watt - PAR20 LED - 3000K - 25 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.054A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- California T24 Listed
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- Silver
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR20
- Lens Finish:
- Clear
- Lens Material:
- Thermo Plastic (PBT)
- Lensed:
- Yes
- Lumens:
- 520L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 12 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 50W
- Location Rating:
- Wet
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 25
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 6.5W
- Product Material:
- Plastic
- Product Weight:
- 0.13 lb
Satco Lighting S29401 – Frequently Asked Questions
1) Can the Satco S29401 PAR20 LED go in a fully enclosed fixture?
Yes. The S29401 is an enclosed rated lamp, so it can be installed in a sealed or fully enclosed fixture without voiding its rating. It is also wet location rated and listed for both indoor and outdoor use, which covers recessed cans with trim lenses, soffit cans, and exterior enclosed fixtures.
2) Will this 3000K PAR20 match the bulbs already in the rest of my building?
Only if your existing lamps are 3000K. The S29401 is fixed at 3000K warm white with no color-selectable switch, so it will read noticeably warmer alongside 4000K lamps and cooler alongside 2700K. For a mixed-vintage property, standardizing the whole run on one color temperature is the only way to get consistent ceilings. CRI is 90, so colors and finishes render accurately, which matters in retail and hospitality spaces.
3) Is a 25 degree beam angle too narrow for general room lighting?
A 25 degree spread is an accent beam, not a wash. The S29401 is the right pick for highlighting artwork, signage, millwork, merchandise, or a bar top from a track head or recessed can. If you need even ceiling-to-floor coverage across a room, choose a wider flood beam PAR20 instead and save the 25 degree lamp for the features.
4) Can I dim these PAR20 LEDs on my existing dimmers?
The S29401 is a dimmable lamp running on 120V, 60Hz. Because the LED driver pulls only 0.054A, a handful of lamps may fall below the minimum load of an older incandescent dimmer, which shows up as flicker or a dead bottom end. On retrofit jobs where the dimmer is staying, use an LED-rated dimmer or keep enough lamps on the circuit to meet its minimum load.
5) Does this Satco PAR20 LED meet California Title 24?
Yes, the S29401 is California T24 listed, so it can be specified on projects in California subject to Title 24 lighting requirements. It is also FCC compliant. Note that it is not DLC listed, so it will not qualify for utility rebate programs that require DLC listing.
6) Can I mount this PAR20 LED base-up in a recessed can or sideways in a track head?
Burning position is universal, so the S29401 can run base-up in a recessed downlight, base-down in a pendant, or horizontal in a track or wall-wash head with no derating or position restriction.
7) How long do these last before maintenance has to relamp again?
Average rated life on the S29401 is 25,000 hours. On a 12-hour-a-day retail or lobby schedule that is roughly five to six years between relamps, which is why MRO buyers usually standardize on one PAR20 LED across a facility rather than keeping halogen stock on the shelf.
8) What is the Satco S29401 lamp actually made of, and is the lens clear or frosted?
The lens is clear thermoplastic (PBT), the body is plastic in a silver finish, and the base is plastic as well. The lamp weighs 0.13 lb. A clear lens keeps the 25 degree beam tight and defined rather than softening the edge the way a frosted lens would.
9) Can I use this LED PAR20 in a three-way lamp socket?
No. The S29401 is not a three-way lamp, so in a three-way socket it will light at one output level only and the switch positions will not step it. For a three-way fixture you need a lamp specifically built for three-way operation.
How fast can I get the Satco Lighting S29401 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29401 come with a warranty?
Absolutely. The Satco Lighting S29401 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29401?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29401 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.