SATCO Lighting S9489 36W, LED ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$67.21
Satco Lighting SAT-S9489 36 Watt - LED HID Replacement - Amber - Medium base - 100-277 Volt

SATCO Lighting S9489 36W, LED HID Replacement, Amber, Medium Base, 100-277V

(No reviews yet) Write a Review

Model: S9489
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$67.21
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S9489 36W, LED HID Replacement, Amber, Medium Base, 100-277V

36 Watt - LED HID Replacement - Amber - Medium base - 100-277 Volt

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.360-0.130A
Avg Rated Hours:
50000
Ballasting Requirements:
Ballast Bypass- Direct wire only 100V-277V
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
No
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White/Grey
Lamp Filament:
LED
Lamp Shape:
Corncob
Lens Finish:
Clear
Lensed:
Yes
Lumens:
4140L
Operating Frequency:
50-60Hz
Product Type:
Corncob
Three-Way:
No
Warranty:
5 Year Limited - Hi-Pro
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Medium
Base Material:
Aluminum / Plastic
Incandescent Equivalent:
200W
Location Rating:
Damp
Subcategory:
LED
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
100V-277V
Beam Spread Angle:
300
Light Temperature:
1461K
Product Category:
Light Bulbs
Product Wattage:
36W
Product Material:
Aluminum / Plastic

Satco Lighting S9489 – Frequently Asked Questions

1) Can I put the Satco S9489 LED corncob into an existing HID fixture with the ballast still in it?
No. The S9489 is a ballast bypass lamp, direct wire only at 100V to 277V. The existing HID ballast has to be removed or bypassed and line voltage run straight to the socket. Wiring it into a live ballast is not a supported install.
2) What color is the light from the Satco S9489 amber LED bulb, and what is it used for?
It is an amber lamp at 1461K, which is well below even a warm white and reads as a deep yellow-amber. That color point is what you specify where white light is restricted: coastal and turtle-friendly lighting, insect-reduction areas, and exterior applications where spill color matters. Do not order it expecting a normal warm white replacement.
3) Can the S9489 corncob lamp be used in an enclosed fixture like a wall pack or acorn globe?
Yes. It is an enclosed rated lamp, so a sealed globe, acorn, or wall pack housing is fine. It also carries a damp location rating, which covers covered exteriors and similar damp areas but not direct wet exposure.
4) Does the S9489 mount base up or base down?
Either. Burning position is universal, so it works base up in a shoebox or post top, base down in a pendant, or horizontal. The 300 degree beam spread means light goes nearly all the way around the lamp rather than in one direction, which suits post tops and open globes more than a reflector fixture trying to throw one way.
5) How much light does the 36W Satco S9489 put out and what is it replacing?
4140 lumens from 36 watts, listed as a 200W incandescent equivalent. For an HID retrofit, judge it on the 4140 lumen figure against the output your existing lamp actually delivers today, since aged HID lamps have usually lost a large share of their original output.
6) Does the Satco S9489 qualify for a DLC utility rebate?
No, it is not DLC listed, so it will not qualify for rebate programs that require a DesignLights Consortium listing. It is Title 24 compliant and FCC compliant.
7) How long does the S9489 LED corncob last before relamping?
Rated at 50,000 hours. On a dusk to dawn schedule of roughly 4,000 hours a year, that is on the order of a decade between relamps, which is the argument for the direct wire conversion labor on a fleet of exterior fixtures.
8) Is the amber color from a coating or a colored lens on this Satco corncob?
The lamp is lensed with a clear lens finish, so the amber output comes from the LED source itself rather than from a tinted cover. That matters for color stability, since a clear-lensed amber source will not shift the way a painted or dipped lamp can.
How fast can I get the Satco Lighting S9489 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9489 come with a warranty?
Absolutely. The Satco Lighting S9489 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9489?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9489 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!