SATCO Lighting S9490 6.5W, LED...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$7.95
Satco Lighting SAT-S9490 6.5 Watt - LED MR16 LED - 2700K - 25 deg. Beam Angle - GU5.3 base - 12 Volt AC/DC

SATCO Lighting S9490 6.5W, LED MR16 LED, 2700K, 25 degree Beam Angle, GU5.3 Base, 12V AC/DC

(No reviews yet) Write a Review

Model: S9490
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$7.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S9490 6.5W, LED MR16 LED, 2700K, 25 degree Beam Angle, GU5.3 Base, 12V AC/DC

6.5 Watt - LED MR16 LED - 2700K - 25 deg. Beam Angle - GU5.3 base - 12 Volt AC/DC

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.542A
Avg Rated Hours:
25000
BAA Compliant:
No
Burning Position:
Universal
CA Web Text:
Lawful for sale
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
Gray
Lamp Base:
Bi Pin GU5.3
Lamp Filament:
LED
Lamp Shape:
MR16
Lens Finish:
Clear
Lensed:
Yes
Lumens:
500L
Operating Frequency:
60Hz
Product Type:
MR
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
50W
Location Rating:
Damp
Product Voltage:
12V
Beam Spread Angle:
25
Light Temperature:
2700K
Product Category:
Light Bulbs
Product Wattage:
6.5W
Product Weight:
0.08 lb

Satco Lighting S9490 – Frequently Asked Questions

1) Will the Satco S9490 MR16 work in my existing low voltage track heads with a magnetic transformer?
The S9490 runs on 12 volts, AC or DC, and draws 0.542 amps at 6.5 watts. That covers both magnetic and electronic 12V supplies as long as the transformer's minimum load is satisfied. Low wattage LED lamps often fall under the minimum load of an older magnetic transformer feeding a single head, so if the fixture has one lamp on a large transformer, check the transformer's minimum. Line voltage 120V MR16 fixtures will not take this lamp.
2) Can the Satco S9490 MR16 go in a fully enclosed fixture?
Yes, it's an enclosed rated lamp, so a sealed or gasketed fixture is fine. It also burns in any position, base up, base down or horizontal, and is rated for damp locations, which covers covered porches, soffits and bathrooms. Damp is not wet, so leave it out of anything with direct water exposure.
3) Will this Satco MR16 dim on my existing low voltage dimmer?
The lamp is dimmable, but on a 12V system the dimming behavior is set by the combination of the dimmer and the transformer, not the lamp alone. Magnetic transformers need a magnetic low voltage (MLV) dimmer and electronic transformers need an electronic low voltage (ELV) dimmer; a mismatch is the usual cause of flicker or a dead band at the bottom of the range.
4) How long will these Satco MR16 LEDs last in a hotel lobby that runs 12 hours a day?
Rated at 25,000 hours average life. At 12 hours a day that's about 5.7 years of service per lamp, versus the annual relamping typical of the 50W halogen it replaces. For a property manager batching a relamp, that puts the whole run on one cycle instead of chasing failures.
5) Is the Satco S9490 Buy American compliant for a federal job?
No. The S9490 is not BAA compliant, so it won't satisfy Buy American Act requirements on a federally funded project. It also carries no DLC listing, which rules it out of utility rebate programs that require DLC qualification. It is FCC compliant and lawful for sale in California.
6) Is this MR16 a clear lens or a frosted one, and does that affect glare?
Clear lens over the LED array, in a gray housing. A clear lens holds the 25 degree beam tight and crisp, which is what you want for accent work; it also means the source is visible in the aperture, so in a shallow trim head where occupants look straight at the lamp, expect more glare than a frosted lens would give.
7) Is there more than one version of the Satco S9490 to choose from?
No options to specify. The S9490 is a single configuration: 6.5W, 2700K, 25 degree beam, GU5.3 base, 12V, in the gray housing. Wattage, color temperature and beam angle are fixed, so ordering is by part number alone.
How fast can I get the Satco Lighting S9490 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9490 come with a warranty?
Absolutely. The Satco Lighting S9490 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9490?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9490 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!