SATCO Lighting S9854 9W LED PL...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$12.70
Satco Lighting SAT-S9854 9 Watt LED PL 2-Pin - 3000K - 850 Lumens - G24d base - 50000 Average rated hours - 120 Deg. Beam Angle - Type A - Ballast dependent

SATCO Lighting S9854 9W LED PL 2-Pin, 3000K, 850 Lumens, G24d Base, 50000 Avg Rated Hours, Type A, Ballast dependent

(No reviews yet) Write a Review

Model: S9854
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$12.70
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S9854 9W LED PL 2-Pin, 3000K, 850 Lumens, G24d Base, 50000 Avg Rated Hours, Type A, Ballast dependent

9 Watt LED PL 2-Pin - 3000K - 850 Lumens - G24d base - 50000 Average rated hours - 120 Deg. Beam Angle - Type A - Ballast dependent

Manufacturer Resources

Spec Sheet

Product Specs

Avg Rated Hours:
50000
Ballasting Requirements:
Ballast required
Burning Position:
Horizontal
CA Web Text:
Lawful for sale
CCT Selectable:
No
CRI:
82
DLC Approved:
No
Dimmable:
No
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
G24d (2-Pin)
Lamp Filament:
LED
Lamp Shape:
PL
Lens Finish:
Frost
Lensed:
Yes
Lumens:
850L
Operating Frequency:
60Hz
Product Type:
PL
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
40W
Location Rating:
Damp
Base Material:
Aluminum / Plastic
Beam Spread Angle:
120
Light Temperature:
3000K
Product Category:
Light Bulbs
Product Wattage:
9W
Product Material:
Aluminum / Plastic
Product Weight:
0.18 lb
Department:
Electrical

Satco Lighting S9854 – Frequently Asked Questions

1) Does the Satco S9854 LED PL lamp need the existing ballast, or do I have to bypass it?
The S9854 is a ballast-dependent, Type A lamp: it runs off the existing fluorescent ballast with no rewiring. Pull the old CFL, drop this in. If the ballast is dead or you plan to bypass and wire line voltage to the sockets, this is the wrong lamp for that job.
2) Will a G24d 2-pin LED PL lamp fit my 4-pin CFL socket?
No. The S9854 has a G24d 2-pin base and only seats in a G24d 2-pin socket. Four-pin fixtures use a G24q base with a different keyway, and the lamp will not physically engage. Check the socket, not the old lamp's wattage.
3) Can I use this LED PL lamp in an enclosed fixture or a damp bathroom?
Yes on both counts. The S9854 is an enclosed-rated lamp, so a sealed can or a closed glass sconce is fine, and it carries a Damp location rating, which covers bathrooms, covered exterior soffits, and stairwells. Damp is not wet, so keep it out of anything exposed to direct rain or spray.
4) Does the Satco S9854 work on a dimmer?
No. This lamp is non-dimming. On a dimmed circuit expect flicker, buzz, or no start at all. If the fixtures are on dimmers, leave the circuit at full output or pick a lamp rated for dimming.
5) Does this PL lamp have to be mounted horizontally?
Yes, horizontal is the specified burning position for this 9W PL lamp. That suits horizontal-socket downlights and sconces. Vertical base-up or base-down sockets are outside the stated position, so plan the retrofit around the fixtures that hold the lamp on its side.
6) What CFL wattage does the 9W Satco S9854 replace in a downlight?
It puts out 850 lumens at 9 watts, rated at a 40W incandescent equivalent. In practice it is the swap for the common 2-pin CFL PL lamps in recessed cans and wall sconces where the existing ballast is still good.
7) Will the 3000K color match the other bulbs in my building?
The S9854 is fixed at 3000K warm white with an 82 CRI, and it is not color-selectable. If the rest of your lamps are 3500K or 4000K, this will read visibly warmer in the same room, so standardize by space rather than mixing within one corridor or lobby.
8) Is the Satco S9854 DLC listed for a utility rebate?
It is not DLC approved, so it will not qualify under programs that require a DLC-listed product. If the rebate is driving the project, verify the program's qualified products list before you commit to a lamp count.
9) How wide is the light spread from the Satco 9W LED PL?
120 degrees, through a frosted lens, so the output is broad and diffused rather than a beam. That is what you want for general ambient coverage in a can or sconce, not for accent or spot work.
10) How long will these LED PL lamps last before maintenance has to go back up the ladder?
Rated at 50,000 average hours. On a 12-hour-a-day common-area schedule that is roughly 11 years of service, which is the main argument for swapping CFL PL lamps out across a property in one pass.
How fast can I get the Satco Lighting S9854 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9854 come with a warranty?
Absolutely. The Satco Lighting S9854 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9854?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9854 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!