SATCO Lighting S9856 9W LED PL...
In stock
$12.70
Satco Lighting SAT-S9856 9 Watt LED PL 2-Pin - 4000K - 900 Lumens - G24d base - 50000 Average rated hours - 120 Deg. Beam Angle - Type A - Ballast dependent

SATCO Lighting S9856 9W LED PL 2-Pin, 4000K, 900 Lumens, G24d Base, 50000 Avg Rated Hours, Type A, Ballast dependent

(No reviews yet) Write a Review

Model: S9856
Selected Finish is

In stock

$12.70
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S9856 9W LED PL 2-Pin, 4000K, 900 Lumens, G24d Base, 50000 Avg Rated Hours, Type A, Ballast dependent

9 Watt LED PL 2-Pin - 4000K - 900 Lumens - G24d base - 50000 Average rated hours - 120 Deg. Beam Angle - Type A - Ballast dependent

Manufacturer Resources

Spec Sheet

Product Specs

Avg Rated Hours:
50000
Ballasting Requirements:
Ballast required
Burning Position:
Horizontal
CA Web Text:
Lawful for sale
CCT Selectable:
No
CRI:
82
DLC Approved:
No
Dimmable:
No
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
G24d (2-Pin)
Lamp Filament:
LED
Lamp Shape:
PL
Lens Finish:
Frost
Lensed:
Yes
Lumens:
900L
Operating Frequency:
60Hz
Product Type:
PL
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
40W
Location Rating:
Damp
Base Material:
Aluminum / Plastic
Beam Spread Angle:
120
Light Temperature:
4000K
Product Category:
Light Bulbs
Product Wattage:
9W
Product Material:
Aluminum / Plastic
Product Weight:
0.18 lb
Department:
Electrical

Satco Lighting S9856 – Frequently Asked Questions

1) Does the Satco S9856 LED PL lamp need the existing ballast, or do I have to rewire the fixture?
Keep the ballast. The S9856 is a Type A, ballast-dependent lamp: it runs off the existing CFL ballast with no rewiring, so it drops straight into the socket. If the ballast has failed, the lamp won't light, and a ballast-bypass (Type B) lamp would be the direction to go instead.
2) Will a G24d 2-pin LED PL lamp fit my 4-pin G24q socket?
No. The S9856 has a G24d 2-pin base, which only seats in 2-pin G24d sockets (the magnetic-ballast style). A 4-pin G24q socket is keyed differently and needs a 4-pin lamp. Check the pins on the lamp you are pulling out before ordering.
3) Can I put this PL LED lamp on a dimmer?
No. The S9856 is non-dimmable. On a dimming circuit expect flicker, buzz, or no start at all. Wire it to a straight on/off switch or occupancy sensor and leave the dimmer out of the circuit.
4) Is this LED PL lamp safe in a fully enclosed fixture?
Yes, it is an enclosed-rated lamp, so sealed vapor-tight and closed-lens fixtures are fine. It is also damp location rated, which covers covered walkways, bathrooms and stairwells, but not direct wet exposure.
5) Does the S9856 have to be mounted horizontally?
Yes, the burning position is horizontal. That suits the typical PL downlight or wall-mount fixture where the lamp lies flat across the can. If your fixture holds the lamp base-up or base-down vertically, this is not the right lamp for it.
6) What CFL wattage does the 9W Satco S9856 replace in a downlight?
At 9 watts it puts out 900 lumens, rated equivalent to a 40W incandescent. In practice it is the swap for the common 2-pin PL compact fluorescent lamps in recessed cans, wall sconces and stairwell fixtures, at roughly a third of the energy draw.
7) Will 4000K match the other bulbs in my building's common areas?
4000K is neutral white, a middle tone between warm 3000K residential light and cool 5000K. It matches most commercial corridor, garage and stairwell lamping. Color rendering is 82 CRI, and the color temperature is fixed, not field selectable, so every lamp in a run will read the same.
8) Does the Satco S9856 qualify for a DLC utility rebate?
No. This lamp is not DLC listed, so it will not qualify under utility programs that require DesignLights Consortium listing. It is FCC compliant and is lawful for sale in California.
9) How wide is the light spread from this PL lamp, and will it look hot-spotted?
Beam spread is 120 degrees, a broad wash rather than a spot, and the lens is frosted, so the output is diffused instead of showing individual diodes. That is what you want in a downlight or sconce where the lamp is partly visible.
10) How long before I have to relamp these again?
Rated at 50,000 average hours. On a 12-hour daily common-area schedule that is over eleven years of service, which is the main argument for converting PL sockets off compact fluorescent in a building where relamping means a lift or a ladder.
How fast can I get the Satco Lighting S9856 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9856 come with a warranty?
Absolutely. The Satco Lighting S9856 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9856?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9856 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!