Schaub 10032 Cafe Collection O...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$38.00
$24.87
Schaub 10032 3-7/8" Cafe Modern Oval Slot Cabinet Pull Schaub 10032

Schaub 10032 Cafe Collection Oval Slot Cabinet Pull for Kitchen and Bath Cabinetry, Solid Brass, 3-7/8" Overall with 3-1/2" Center-to-Center

(No reviews yet) Write a Review

Model: 10032-MB
From the Cafe Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$38.00
$24.87
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 10032 Cafe Collection Oval Slot Cabinet Pull for Kitchen and Bath Cabinetry, Solid Brass, 3-7/8" Overall with 3-1/2" Center-to-Center

The Schaub 10032 is a Cafe Collection cabinet pull featuring a modern oval slot design finished in Vintage Brass. Crafted from solid brass, this pull measures 3-7/8" overall with 3-1/2" center-to-center screw spacing and a 1-1/8" projection from the mounting surface. With a 3/8" base dimension for a low-profile footprint, this contemporary pull is a versatile choice for updating kitchen and bathroom cabinetry. The Vintage Brass finish brings warm, traditional tones to the Cafe Collection's clean, modern silhouette, suiting both classic and contemporary interiors.

Key Features

  • Overall Length: 3-7/8" overall pull length suits a range of drawer and cabinet door widths.
  • Center-to-Center Spacing: 3-1/2" center-to-center hole spacing for straightforward installation on standard cabinet drilling patterns.
  • Projection: 1-1/8" projection provides comfortable clearance for gripping.
  • Base Dimension: 3/8" base dimension creates a low-profile mounting footprint.
  • Solid Brass Construction: Built from solid brass for genuine weight, durability, and long-lasting performance.
  • Vintage Brass Finish: Vintage Brass finish complements the Cafe Collection's modern oval slot design.
  • Mounting Hardware: Sized for #8-32 screws for secure mounting to cabinet doors and drawers.
  • Design Versatility: The oval slot silhouette complements a wide range of cabinet door and drawer styles for cohesive residential design.
  • Cafe Collection Styling: Contemporary oval slot silhouette delivers a clean, modern look for cabinet hardware.

Certifications & Compliance

  • California Proposition 65 Warning applies for California residents per manufacturer documentation.

Technical Specifications

  • MAP Policy: Yes

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Residential Furniture
  • Custom Cabinetry Projects
  • Home Remodeling and Renovation
  • Drawer and Door Hardware Upgrades

Why Schaub 10032?

Schaub Cafe Collection hardware is crafted from solid brass for genuine weight and durability, finished in Vintage Brass for a refined, contemporary appearance. The 10032 oval slot pull brings consistent detailing and quality construction to residential cabinetry projects, making it a dependable choice for kitchen and bath hardware updates.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Cafe
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
Commercial/Residential:
Residential
MAP Policy:
Yes
Overall:
3-7/8"
Thread / Screw Size:
#8-32 Screw
Product Function:
Cabinet Pull
Product Dimension:
3/8"
Product Projection:
1-1/8"
Product Style:
Contemporary
Product Material:
Solid Brass
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
3-1/2"
Department:
Door Hardware

Schaub 10032-MB – Frequently Asked Questions

1) Is the Schaub 10032 Cafe pull rated for commercial cabinetry or is it a residential pull?
Residential. The 10032 Cafe is specified as a residential cabinet pull, which is the right call for apartment kitchens, condo turns, model units and hospitality casework. For high-traffic institutional millwork, a school or hospital casework run, look at a steel bar pull instead, such as the Orca Hardware CK-12001 T-pull bar.
2) I need a modern brass cabinet pull on 4 inch centers instead of 3-1/2 inch - what should I order?
The Schaub 10032 Cafe pull is drilled for 3-1/2 inch centers only, so it will not land on 4 inch holes. For 4 inch center-to-center spacing in a modern forged solid brass pull, the Omnia 1968/102 is built for that spacing. The Trimco 562 Series also lists a 4 inch center-to-center option among its drawer pulls.
3) My drawer fronts are drilled on 3 inch centers - does the Schaub 10032 fit, and what does?
The Schaub 10032 will not fit 3 inch drilling; it is made for 3-1/2 inch centers. For fronts already bored on 3 inch centers, the Trimco 553 Series drawer pull is a 3 inch center-to-center pull. Choosing it avoids plugging and re-boring the existing holes.
4) How much clearance does the Schaub 10032 cabinet pull stand off the door face?
Projection is 1-1/8 inches from the face of the door or drawer front, with a 3/8 inch base dimension where it meets the wood. That 1-1/8 inch is enough grip room for a gloved hand, and it is the number to check against anything that swings past the cabinet: an adjacent door in an inside corner, a run of appliance fronts, or a drawer next to a wall return.
5) What finishes does the Schaub 10032 Cafe pull come in?
Eight finishes: Brushed Nickel, Gun Metal, Matte Black, Matte White, Polished Nickel, Satin Brass, Unlacquered Brass, and Vintage Brass. Unlacquered Brass is the one to think twice about on a rental or a multi-unit turn, since raw brass has no clear coat and will patina with handling. Matte White is the unusual one in the set and is the option if you are matching painted cabinetry rather than metal.
6) Is the Schaub 10032 pull solid brass or plated zinc?
Solid brass throughout the base material, not a zinc die casting with a brass-tone plate. That matters on a pull that gets grabbed thousands of times: solid brass will not crack at the post where a pot metal casting eventually does, and a scuff on the finish exposes brass rather than gray zinc. It is the same reason the Deltana SBP35 and the Omnia 1968, 1969, 1970 and 1971 pulls are specified as solid brass.
7) I need to match cabinet pulls across a whole unit. Does the Schaub Cafe collection come in other sizes?
The 10032 is the 3-7/8 inch overall, 3-1/2 inch center to center size in the Cafe collection, with the modern oval slot profile and a contemporary look. To keep one look across a kitchen where drawers need longer centers than doors, stay within the Cafe collection so the slot profile, 1-1/8 inch projection and finish read the same across every front. Schaub pulls are also carried under the Emtek SELECT program as the Schaub Collection, so an Emtek 8405 Select cabinet pull in a matching finish is a way to extend the same family.
8) What else could I use if I want a 3-1/2 inch center to center cabinet pull in a different style?
At the same 3-1/2 inch centers, the Trimco 562 Series drawer pull is offered in 3-1/2 inch, 4 inch and 96mm centers, and the Deltana SBP35 is a modern square bar pull at 3-1/2 inches in solid brass. Those are square and bar profiles rather than the oval slot shape of the Schaub 10032, so they change the look while keeping the same hole spacing. If you are drilling new fronts and are not locked to 3-1/2 inches, the Omnia 1968/102 runs 4 inch centers.
9) Do I need longer screws for the Schaub 10032 on thick or slab cabinet doors?
The pull takes #8-32 machine screws, and stock cabinet hardware screws are cut for a nominal 3/4 inch front. On a thicker slab door, a five-piece front with an applied panel, or a front with a backing plate behind it, you will need longer #8-32 screws to reach through and still get full thread into the post. Measure the actual front thickness before you order, because a screw that bottoms short will let the pull work loose.
10) What is the difference between the Schaub 10032 Cafe pull and the Omnia 1969, 1970 and 1971 modern pulls?
All four are modern-styled cabinet pulls. The Schaub 10032 is a Cafe collection oval slot pull in solid brass with a 1-1/8 inch projection off the door face. The Omnia 1969 and Omnia 1971 are forged solid brass pulls with a 1-3/16 inch projection, and the Omnia 1970 is forged solid brass with a 1-1/4 inch projection. If knuckle clearance in front of a drawer front is what you are sizing, the Schaub sits closest to the face of the three projections.
11) Can I use an Orca Hardware Bachelor knob in place of the Schaub 10032 pull?
No - those are single-hole knobs, not two-hole pulls. The Schaub 10032 is a cabinet pull drilled on 3-1/2 inch centers, so it needs two holes. The Orca Hardware CK-15030 round cabinet knob and CK-16030 round ring cabinet knob are both 1-1/4 inch diameter knobs, and the CK-17025 Blackcomb square knob is a 25mm knob; each mounts on one center hole. Swapping a Schaub 10032 for any of them leaves two existing holes to fill.
12) Is there a steel alternative to the Schaub 10032 brass pull for a back-of-house or utility cabinet run?
Yes. The Schaub 10032 Cafe pull is solid brass and catalogued for residential use. Where a plainer steel pull suits the run better, the Orca Hardware CK-12001 T-Pull Bar is a steel pull with a 2 inch bar width in satin nickel. It is a different mounting footprint than the Schaub 3-1/2 inch centers, so confirm the drilling before ordering it as a swap into existing fronts.
13) Is the Schaub 10032 a knob or a pull, and what does modern oval slot mean?
It is a two-post pull, not a knob, so it fastens through two holes at 3-1/2 inch centers rather than a single center bore. The modern oval slot profile means the grip is an elongated opening you reach into rather than a round bar you wrap. If you are looking for a single-hole knob instead, the Orca Hardware Bachelor Collection round knob at 1-1/4 inch diameter is a knob-style option.
14) I am matching Schaub Cafe pulls to other Schaub-styled hardware in the same kitchen - what else carries the Schaub look?
The Schaub 10032 belongs to the Cafe collection, a contemporary oval slot pull. Emtek carries Schaub Collection cabinet hardware in several series that can be mixed into the same run: the Emtek 8405 Select cabinet pulls, the Emtek Alexander cabinet pull, the Emtek Art Deco cabinet pull, and the Emtek Bar cabinet pull. Each is listed as a cabinet knob/pull, so verify the center-to-center of the specific piece against the 3-1/2 inch drilling used by the 10032.
How fast can I get the Schaub 10032-MB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 10032-MB come with a warranty?
Absolutely. The Schaub 10032-MB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 10032-MB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 10032-MB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!