Schaub 1205 Modo Collection 18...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$155.00
$89.75
Schaub 1205 18" Center to Center Modo Cabinet Pulls Schaub 1205

Schaub 1205 Modo Collection 18" Center-to-Center Cabinet Pull in Zinc & Aluminum, 22-7/8" Overall Length

(No reviews yet) Write a Review

Model: 1205-MB
From the MODO Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$155.00
$89.75
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 1205 Modo Collection 18" Center-to-Center Cabinet Pull in Zinc & Aluminum, 22-7/8" Overall Length

This Schaub 1205 Modo Collection cabinet pull features an 18" center-to-center mounting spacing and a 22-7/8" overall length, making it well suited to substantial drawer and door applications. Constructed from a durable Zinc & Aluminum base material, the pull offers a 1-3/8" projection and a 4-5/8" base dimension for a stable, secure mount. Clean, contemporary lines make this Modo design a versatile choice for modern kitchens, baths, and custom cabinetry.

Key Features

  • Center-to-Center Spacing: 18" center-to-center mounting accommodates wide drawers and cabinet doors for a substantial, balanced pull placement.
  • Overall Length: 22-7/8" overall length delivers a bold, contemporary presence suited to larger cabinet fronts.
  • Base Dimension: 4-5/8" base dimension provides a stable mounting footprint for long-term secure installation.
  • Comfortable Projection: 1-3/8" projection offers ample clearance for a comfortable, secure grip.
  • Durable Construction: Zinc & Aluminum base material construction is engineered for long-term durability in daily use.
  • Contemporary Modo Design: Clean, contemporary styling from the Modo collection complements modern cabinetry and furniture designs.
  • Included Mounting Hardware: Ships with 2 break-off screws, M4x45, allowing installers to trim to the correct door or drawer thickness.

Certifications & Compliance

  • California Proposition 65 Warning applies for California residents; refer to the manufacturer's product stewardship page for details.

Technical Specifications

  • MAP Policy: Yes
  • Thread / Screw Size: 2 X Break-Off Screws M4x45
  • (CTC) Center-to-Center: 18"

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture
  • Residential Remodeling Projects
  • Commercial Millwork
  • Retail Display Cabinetry

Why Schaub Modo?

Schaub Modo cabinet pulls are built from a durable Zinc & Aluminum base material and sized with a generous 22-7/8" overall length and 1-3/8" projection for confident, everyday use. The contemporary Modo design and precise 18" center-to-center spacing make this pull a dependable choice for updating kitchens, baths, and custom cabinetry with professional-grade hardware.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
MODO
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
22-7/8"
Thread / Screw Size:
2 X Break-Off Screws M4x45
Product Function:
Cabinet Pull
Product Dimension:
4-5/8"
Product Projection:
1-3/8"
Product Style:
Contemporary
Product Material:
Zinc & Aluminum
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
18"
Department:
Door Hardware

Schaub 1205-MB – Frequently Asked Questions

1) What screws come with the Schaub 1205 Modo cabinet pull, and will they work on a thicker drawer front?
Two break-off screws, M4x45, ship with the 1205 Modo pull. Break-off means you snap them to length on site, so one screw covers thin flat-panel drawer fronts and thicker slab or applied-molding fronts without ordering a separate screw pack. Metric M4 thread, so don't try to substitute an 8-32 machine screw out of your bin.
2) What is the closest alternative to the Schaub 1205 Modo pull for an 18-inch center-to-center appliance or tall pantry door?
The Schaub 1205 Modo is the long-run option, with 18-inch center-to-center spacing, a 22-7/8 inch overall length, and 1-3/8 inch projection off the face. Among the modern pulls carried alongside it, the Omnia 1968/102 is built around 4 inch center-to-center spacing, the Deltana SBP35 Modern Square Bar Pull is a 3-1/2 inch bar, and the Trimco 553 Series drawer pulls run 3 inch center-to-center. Those are drawer-scale pulls. If the hole spacing on the door is already drilled at 18 inches, the 1205 is the pull that lands on it; the shorter bars would require new boring.
3) I want solid brass instead of zinc and aluminum for a Modo-style pull. What should I look at?
The Schaub 1205 Modo is a zinc and aluminum pull. If the specification calls for solid brass, the Omnia 1968/102, 1969, 1970 and 1971 modern cabinet pulls are all forged solid brass, and the Deltana SBP35 Modern Square Bar Pull is heavy-duty solid brass. The trade is length: the 1205 Modo carries 18 inch center-to-center spacing, while the Omnia 1968/102 is a 4 inch center-to-center pull and the Deltana SBP35 a 3-1/2 inch bar, so a brass swap on a long appliance door means changing the hole layout as well as the material.
4) Can I use the Schaub 1205 as a replacement for a stainless appliance handle on a panel-ready fridge?
Only if the existing bore spacing is 18 inches on center, since the 1205 mounts through two holes at that spacing with M4x45 break-off screws. Panel-ready appliance fronts vary, so measure hole to hole before ordering. If the existing spacing is anything else, you are filling and redrilling the panel, not swapping the pull.
5) Can I use a cabinet knob in place of the Schaub 1205 Modo pull?
No, they are not interchangeable. The Schaub 1205 Modo is a two-hole pull on 18 inch center-to-center spacing, fastened with two break-off M4x45 screws. The Orca Hardware Bachelor Collection CK-15030 round knob and CK-16030 round ring knob are 1-1/4 inch diameter, and the Blackcomb CK-17025 square knob is 25mm diameter; those are single-point knobs that mount through one hole. Swapping a knob onto a door already bored for the 1205 leaves two open holes, and a knob gives a different grip on a tall door than a 22-7/8 inch bar.
6) How does the Schaub 1205 Modo compare to the Omnia 1969, 1970 and 1971 modern pulls on projection?
The Schaub 1205 Modo stands 1-3/8 inch off the cabinet face. The Omnia 1969 and Omnia 1971 modern pulls are both built to a 1-3/16 inch projection, and the Omnia 1970 to 1-1/4 inch. All three Omnia pulls are forged solid brass; the 1205 Modo is zinc and aluminum. Projection is the number that decides finger clearance and whether the pull clears an adjacent door swing or a counter overhang, so measure the gap before settling on one.
7) Is the Emtek Schaub Collection the same thing as the Schaub 1205 Modo?
They are related but not the same part. The Schaub 1205 is the Modo collection, a contemporary cabinet pull at 18 inch center-to-center. Emtek carries several Schaub Collection cabinet pulls under its own numbers - the Emtek 8405 in the Emtek SELECT series, plus the Alexander, Art Deco and Bar series - and each is catalogued as a cabinet knob/pull in its own design family. If a drawing calls out Modo, order the Schaub 1205; the Emtek Schaub Collection series are separate designs and will not visually match a Modo run.
8) For a run of drawers under the same cabinet doors, what pairs with the Schaub 1205 Modo?
The 1205 Modo at 18 inch center-to-center is sized for tall doors and appliance panels, not drawer fronts. For the drawer banks in the same run, the Trimco 562 Series drawer pulls come in 3-1/2 inch, 4 inch and 96mm center-to-center, the Trimco 553 Series in 3 inch center-to-center, the Omnia 1968/102 in 4 inch center-to-center, and the Deltana SBP35 as a 3-1/2 inch square bar. Pick the drawer spacing that matches the existing bore, and hold the finish consistent - the 1205 Modo comes in Gun Metal, Matte Black, Polished Rose Gold and Signature Satin Brass.
9) Will the Schaub Modo pull match the rest of a contemporary cabinet package?
Modo is Schaub's contemporary line, a straight bar profile with a 4-5/8 inch base dimension. For a whole-kitchen or whole-unit package it pairs with the rest of the Modo collection, so a property manager standardizing across units can run the same finish and profile from small drawer pulls up to this 18 inch appliance size. Schaub hardware is also carried under Emtek's Schaub Collection, including the Emtek 8405 SELECT, Alexander, Art Deco, and Bar cabinet pulls, if you want a different profile from the same house.
10) What is a T-bar or knob alternative if an 18 inch Modo pull is too much hardware for the door?
For small doors and drawers where a 22-7/8 inch bar is out of scale, knobs and short pulls are the alternative: Orca Hardware's Bachelor Collection round knob and round ring knob are both 1-1/4 inch diameter, the Blackcomb square knob is 25mm, and the Orca CK-12001 T-pull bar has a 2 inch bar width in steel with a satin nickel finish. Use the long Modo on the appliance and pantry fronts and a smaller pull or knob on the base cabinets, which is how most contemporary kitchens are specified.
11) Is the Orca CK-12001 T-Pull Bar an alternative to the Schaub 1205 Modo?
They serve different jobs. The Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel. The Schaub 1205 Modo is a zinc and aluminum contemporary pull with a 4-5/8 inch base dimension, 1-3/8 inch projection, and 18 inch center-to-center spacing, finished in Gun Metal, Matte Black, Polished Rose Gold or Signature Satin Brass. If the design intent is a long contemporary bar across a tall door in a decorative finish, the 1205 is the one that carries it; the CK-12001 is a short steel bar in a single finish.
How fast can I get the Schaub 1205-MB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 1205-MB come with a warranty?
Absolutely. The Schaub 1205-MB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 1205-MB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 1205-MB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!