Schaub 20012 Quadrato Cabinet ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$43.00
$28.72
Schaub 20012 320 mm Center to Center Quadrato Cabinet Pull

Schaub 20012 Quadrato Cabinet Pull with 320 mm Center-to-Center Spacing and Breakaway Screws

(No reviews yet) Write a Review

Model: 20012-GM
From the Quadrato Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$43.00
$28.72
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 20012 Quadrato Cabinet Pull with 320 mm Center-to-Center Spacing and Breakaway Screws

The Schaub 20012 Quadrato Cabinet Pull brings clean, contemporary style to kitchen and bath cabinetry with 320 mm center-to-center hole spacing for straightforward installation. Part of the Quadrato collection, this pull is constructed from zinc with a 1-1/8" projection and an overall length of 14-1/2", giving drawers and doors a substantial, modern handhold. Each pull ships with 2x 45mm M4 x .7mm breakaway screws, allowing the mounting hardware to be trimmed to fit a range of door and drawer thicknesses.

Key Features

  • Center-to-Center Spacing: 320 mm center-to-center hole spacing for precise, drop-in replacement or new cabinetry installation.
  • Overall Length: 14-1/2" overall length delivers a substantial, easy-to-grip pull.
  • Projection: 1-1/8" projection from the mounting surface for comfortable clearance.
  • Base Dimension: 3/8" base dimension for a low-profile mounting footprint.
  • Zinc Construction: Zinc base material provides long-lasting durability for everyday cabinet use.
  • Breakaway Mounting Screws: Includes 2x 45mm M4 x .7mm breakaway screws that can be snapped to length for various door and drawer thicknesses.
  • Contemporary Quadrato Design: Clean-lined contemporary style from the Quadrato collection complements modern cabinetry.

Certifications & Compliance

  • California Proposition 65 Warning applies for California residents; refer to manufacturer product stewardship documentation for details.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Overall: 14-1/2"
  • Product Dimension: 3/8"
  • Product Projection: 1-1/8"
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture Pieces
  • Commercial Casework
  • Multi-Family Residential Remodels
  • Builder and Renovation Projects

Why Schaub Quadrato?

Schaub Quadrato cabinet hardware is built from zinc for reliable, everyday durability, and the included breakaway screws make installation flexible across a variety of cabinet thicknesses, suiting both new builds and renovation projects. Engineered with clean, contemporary lines, the 20012 pull is designed to deliver dependable performance for a range of cabinetry and casework applications, from kitchens and vanities to custom furniture pieces, while the 320 mm center-to-center spacing and 14-1/2" overall length make it a straightforward fit for both new construction and cabinet hardware upgrades across residential and light commercial projects alike today.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Quadrato
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
14-1/2"
Thread / Screw Size:
2x 45mm M4 x .7mm Breakaway Screws
Product Function:
Cabinet Pull
Product Dimension:
3/8"
Product Projection:
1-1/8"
Product Style:
Contemporary
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
320 mm
Department:
Door Hardware

Schaub 20012-GM – Frequently Asked Questions

1) What is the closest solid brass alternative to the Schaub 20012 Quadrato pull for a contemporary kitchen?
The Schaub 20012 Quadrato is a zinc pull in a contemporary style. If the specification calls for forged solid brass instead, the Omnia 1968/102 modern cabinet pull is forged solid brass with 4 inch center-to-center spacing, and the Omnia 1970 modern cabinet pull is forged solid brass with a 1-1/4 inch projection, close to the 1-1/8 inch projection of the Quadrato. The Omnia pulls are much shorter across than the 14-1/2 inch overall length of the 20012, so they suit small drawers and doors rather than wide appliance or pantry fronts.
2) I need a smaller pull than the 320 mm Quadrato for base cabinet drawers. What should I use?
The Schaub 20012 Quadrato is a long pull, 14-1/2 inch overall on 320 mm center-to-center spacing, which is sized for wide drawers and tall appliance panels. For standard base cabinet drawers, the Trimco 553 series drawer pull is on 3 inch center-to-center spacing, and the Trimco 562 series is offered in 3-1/2 inch, 4 inch and 96 mm center-to-center options. The Deltana SBP35 modern square bar pull is a 3-1/2 inch solid brass pull with a squared profile that reads closest to the Quadrato's clean-lined look.
3) How much hand clearance does the Schaub Quadrato 20012 give off the cabinet face?
Projection is 1-1/8 inches from the mounting surface, with a 3/8 inch base dimension keeping the footprint low against the door. That 1-1/8 inch standoff is enough room to get a full hand behind the bar, which matters on heavy pantry drawers and on appliance-panel fronts. It also means you need at least that much swing clearance from an adjacent wall or perpendicular run of cabinets.
4) What finishes does the Schaub 20012 Quadrato pull come in, and can I match them across a whole kitchen?
Four finishes: Gun Metal (GM), Matte Black (MB), Satin Bronze (SBZ), and Signature Satin Brass (SSB). All four are the same Quadrato collection profile, so if you are standardizing a kitchen or a multi-family unit package you can run one finish across every drawer and door and pick up shorter Quadrato center-to-center sizes in the matching finish.
5) Is the Schaub Quadrato 20012 solid brass or plated zinc?
The Quadrato 20012 is zinc. Zinc die cast gives you a heavy feel and holds crisp square edges on a contemporary profile at a lower cost than forged brass. If the spec on your job calls specifically for solid brass, look at the Omnia 1968/102 or Omnia 1970 modern cabinet pulls, both forged solid brass, or the Deltana SBP35 square bar pull in solid brass.
6) What else could I use instead of the Schaub Quadrato if I need a smaller modern square pull?
The Quadrato 20012 only covers the 320 mm spacing. For short runs, the Deltana SBP35 is a 3-1/2 inch modern square bar pull in solid brass, and the Trimco 562 Series drawer pull offers 3-1/2 inch, 4 inch, and 96 mm center-to-center options, which suits commercial casework where you are matching a submittal. Trimco 553 Series is a 3 inch center-to-center drawer pull.
7) What should I use on a small cabinet door where a 320 mm pull will not fit?
Where a door face is too narrow for the 14-1/2 inch overall length of the Schaub 20012 Quadrato, a single-hole knob is the usual answer. The Orca Hardware Blackcomb collection square cabinet knob is 25 mm square, which keeps the squared geometry of a Quadrato-style scheme. The Orca Bachelor collection round cabinet knob and the Bachelor round ring knob are both 1-1/4 inch diameter if a round profile suits the door better. All three are single-hole knobs, so they do not use the two-hole 320 mm drilling the 20012 requires.
8) Which pull works for a commercial casework job if I want steel rather than zinc?
The Schaub 20012 Quadrato is a zinc pull and is used on kitchen cabinetry, vanities and commercial casework. If the job calls for steel, the Orca Hardware CK-12001 T-pull bar is a steel pull with a 2 inch bar width in satin nickel. The Schaub 20012 is offered in Gun Metal, Matte Black, Satin Bronze and Signature Satin Brass, so the Orca is the option when satin nickel is the required finish.
9) Can I mix the Schaub Quadrato pull with knobs on the same kitchen?
Yes, and it is common to run long pulls like the 320 mm Quadrato on drawers with knobs on upper doors. The Quadrato is a contemporary square-edged profile, so pair it with a square knob rather than a round one if you want the lines to read together. The Orca Blackcomb square cabinet knob at 25 mm is a square-profile option; the Orca Bachelor round knobs at 1-1/4 inch diameter are the softer contrast choice.
10) I want a decorative pull instead of the contemporary Quadrato look. What are the options?
The Schaub 20012 Quadrato is a clean-lined contemporary pull. For a more ornamented face in the same Schaub collection of cabinet hardware, the Emtek Art Deco cabinet pull is from the Art Deco series and the Emtek Alexander cabinet pull is from the Alexander series, both cabinet knob/pull items. Either changes the styling of the door face while keeping cabinet pull mounting.
11) Which Omnia pull is closest on projection to the Schaub 20012 Quadrato?
The Schaub 20012 Quadrato projects 1-1/8 inch from the mounting surface. Among the Omnia modern cabinet pulls, the 1969 and the 1971 both project 1-3/16 inch and the 1970 projects 1-1/4 inch, all in forged solid brass. Projection matters where a drawer sits next to an appliance or in a tight corner, so check knuckle clearance before swapping in a deeper pull.
How fast can I get the Schaub 20012-GM delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 20012-GM come with a warranty?
Absolutely. The Schaub 20012-GM is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 20012-GM?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 20012-GM from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!