Schaub 211023 8-1/2" Turno 8" Center to Center Cabinet Pull

It mounts with standard #8-32 machine screws, the common cabinet hardware thread. If you are going into a thicker front, a 5-piece drawer face, or a slab door with an applied panel, measure the front and get longer #8-32 screws to suit. The thread size itself is unchanged, so any #8-32 cabinet screw length works.

The Schaub 211023 is built on an 8 inch center-to-center spacing, so it will not drop into short drawer boring. For tighter hole spacing, Trimco's 553 series drawer pulls are 3 inch center-to-center and the 562 series comes in 3-1/2 inch, 4 inch and 96mm center-to-center. Omnia's 1968/102 is a 4 inch center-to-center forged solid brass pull, and Deltana's SBP35 is a 3-1/2 inch bar pull.

Projection is 1-3/8 inches, which is generous for a cabinet pull and gives a full hand grip, useful on heavy pantry doors or deep pot drawers. Keep that in mind on an inset door next to a wall return or a perpendicular run of cabinets, and on appliance panels where the pull could clash with an adjacent handle. The bar base measures 1/2 inch.

Four bronze finishes: Black Bronze (BB), Light Bronze (LB), Natural Bronze (NB), and Polished White Bronze (PWB). All are living finishes on a cast bronze body, so they will mellow with handling over time. If you are outfitting a full kitchen or a run of units, order the whole quantity at once in one finish code so the castings come from the same run.

Cast bronze, not plated pot metal. That matters on an 8 inch pull, because a long span sees real leverage every time someone opens a loaded drawer, and it matters again in a rental or hospitality setting where the finish gets scrubbed. The Turno is a rustic-style pull, so the casting texture is part of the look rather than a defect.

The Turno is a rustic cast bronze pull. For a clean contemporary line, the Omnia 1968, 1969, 1970 and 1971 series are forged solid brass modern pulls, with the 1968/102 at 4 inch center-to-center and the 1969 and 1971 at 1-3/16 inch projection. The Orca Hardware CK-12001 T-pull bar in steel with a satin nickel finish is another modern option. If you want the same Schaub design language in another catalog, look at the Emtek Alexander, Art Deco and Bar pulls in the Schaub Collection.

The Turno 211023 only comes in the 8 inch center-to-center size, so for small drawers you need a different pull. Trimco's 553 Series is a 3 inch ctc drawer pull, and the 562 Series covers 3-1/2 inch, 4 inch and 96mm ctc. The Deltana SBP35 is a 3-1/2 inch solid brass square bar pull. Match finish family carefully, since the Turno is cast bronze.

The 211023 uses #8-32 machine screws. If your fronts are thicker than standard, or you are mounting through a false front plus a box face, plan on sourcing longer #8-32 screws to suit the total thickness. Nothing about the pull changes, only the screw length.