Schaub 211060 3" Fused Glass Rectangular Cabinet Pull with 4-1/2” x 1” Overall

Yes, if your drawers are drilled on 3 inch centers. The Schaub 211060 Fused Glass pull mounts at 3 inch center-to-center, which is the most common older drawer pull spacing in North American cabinetry, so it drops onto existing 3 inch holes without new drilling. Overall length is 4-1/2 inches, so it will cover a little more of the drawer face than a compact 3 inch pull but nothing at the hole locations changes.

For a rental turn, a busy commercial kitchenette, or anywhere the hardware takes abuse, go solid metal instead of glass. The Trimco 553 Series drawer pull is also 3 inch center-to-center, so it drops straight into the same holes. If you can redrill, the Deltana SBP35 modern square bar pull is heavy-duty solid brass, and the Omnia 1969, 1970, and 1971 series are forged solid brass modern pulls with projections of 1-3/16, 1-1/4, and 1-3/16 inches respectively.

No. The 211060 is fixed at 3 inch center-to-center and cannot span 4 inch holes. Either redrill and patch the drawer fronts, or pick a pull that matches what you have: the Omnia 1968/102 is a forged solid brass modern pull at 4 inch center-to-center, and the Trimco 562 Series is offered in 3-1/2 inch, 4 inch, and 96mm center-to-center.

The Schaub 211060 is a glass and stainless steel pull on 3 inch centers with a 4-1/2 inch overall length. If you want the same 3 inch hole spacing without the fused glass element, the Trimco 553 Series drawer pulls are offered at 3 inch center-to-center, so existing bores line up. The tradeoff is appearance: the 211060 carries a translucent white glass bar paired with either brushed stainless steel or gold, while the Trimco is a plain metal drawer pull.

The Schaub 211060 is fixed at 3 inch center-to-center. For wider drawers, the Trimco 562 Series is offered in 3-1/2 inch, 4 inch, and 96mm center-to-center, and the Omnia 1968/102 is a forged solid brass modern pull on 4 inch centers. Both are solid metal designs rather than the fused glass and stainless steel build of the 211060, so mixing them on the same run of cabinetry will read as two different styles.

The Schaub 211060 is built from glass and stainless steel with a decorative translucent white glass bar, which suits residential and hospitality millwork. For heavy commercial casework where the pull takes abuse, the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inch, and the Orca Hardware CK-12001 is a steel T-pull bar in satin nickel with a 2 inch bar width. Both are all-metal constructions without a glass component.

It uses #8-32 hardware, and the screw supplied is a #8-32 wood screw. That is the standard cabinet pull thread, so if you are replacing another pull you can reuse machine screws you already have in the right length. On a thicker or applied drawer front you may need longer #8-32 screws than the ones packed with it.

Projection is 1-1/8 inches, with a 1/2 inch base dimension where the posts meet the cabinet face. That gives roughly enough grip clearance for a gloved hand and keeps the pull clear of an adjacent door or an appliance panel in a tight inside corner. Worth checking against any drawer that opens next to a wall return.

It is glass and stainless steel. The rectangular grip is fused glass from Schaub's Fused Glass collection, mounted on stainless steel posts that carry the load into the drawer face. This is a decorative kitchen and bath pull, not a heavy commercial part, so it suits residential cabinetry, millwork, and hospitality casework rather than high-abuse MRO settings.

Two: Translucent White with Brushed Stainless Steel (TW-BSS) and Translucent White with Gold (TW-GLD). The glass is translucent white in both; the choice is the metal. Pick TW-BSS to line up with stainless appliances and satin nickel faucets, TW-GLD for warm brass or champagne bronze fixtures.

They are related but not interchangeable. Emtek sells a Schaub Collection that includes the Alexander, Art Deco, Bar, and SELECT 8405 cabinet knob and pull lines. Those are separate model families with their own sizing. The 211060 is Schaub's own Symphony Elegance fused glass design, translucent white glass on stainless steel at 3 inch center-to-center. If a drawing calls out an Emtek Schaub Collection part number, order that part number, not this one.

The Schaub 211060 has a 1-1/8 inch projection. Among comparable modern pulls, the Omnia 1969 and Omnia 1971 are forged solid brass with a 1-3/16 inch projection and the Omnia 1970 is at 1-1/4 inch, so all three stand further off the face rather than less. If clearance behind the pull is the constraint on your opening, the 211060 is the shallower of these options.

Emtek lists several cabinet pulls in its Schaub Collection, including the Emtek 8405 Select, the Alexander, the Art Deco, and the Bar cabinet pull, all catalogued as cabinet knob/pull. They are separate series from the Schaub 211060, which is the Symphony Elegance style in the Fused Glass collection with a translucent white glass bar. If the fused glass look is what you specified, stay with the 211060; if you are matching an Emtek package elsewhere in the kitchen, the Schaub Collection pulls keep the ordering under one brand.

The 211060 is part of Schaub's Symphony Elegance style within the Fused Glass collection, so it is designed to coordinate with other Symphony Elegance pieces in the same translucent white glass and metal pairings. If you are specifying a whole kitchen, keep the metal finish code consistent (TW-BSS or TW-GLD) across every piece so the glass and the metal both match across doors and drawers.

Two-post pulls like the Schaub 211060 give a full-hand grip and are what most people want on drawers and on tall pantry doors. Single-hole knobs are quicker to install, only need one bore, and are common on upper doors. If you want knobs on the doors and pulls on the drawers, Orca Hardware's Bachelor Collection round knobs come in 1-1/4 inch diameter and the Blackcomb Collection square knob is 25mm. Mixing knobs and pulls is normal, just keep the metal finish consistent.