Schaub 211096 Monza Cabinet Pu...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$72.00
$47.86
Schaub 211096 12" Center to Center Monza Cabinet Pull

Schaub 211096 Monza Cabinet Pull, 12" Center to Center, Aluminum, Contemporary Style

(No reviews yet) Write a Review

Model: 211096-MA
From the Monza Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$72.00
$47.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 211096 Monza Cabinet Pull, 12" Center to Center, Aluminum, Contemporary Style

The Schaub 211096 Monza Cabinet Pull brings a contemporary style to kitchen, bath, and commercial cabinetry with a 12" center to center mounting span and an overall length of 13-5/8". Crafted from aluminum, this pull projects 1-1/4" from the cabinet surface and mounts using a 5/8" base dimension along with M4 thread screws. As part of the Monza collection, the 211096 offers a clean, modern profile that suits contemporary cabinetry designs across residential and commercial settings. The combination of a durable aluminum base and precise mounting dimensions makes this pull a practical choice for cabinet doors and drawers that see regular daily use.

Key Features

  • Center to Center Mounting: 12" center to center spacing provides a standard mounting span suited to a wide range of cabinet doors and drawers.
  • Overall Length: 13-5/8" overall length delivers a substantial, easy to grip pull for everyday cabinet use.
  • Projection: 1-1/4" projection from the cabinet surface allows comfortable clearance for hand access when opening doors or drawers.
  • Aluminum Construction: Aluminum base material offers a durable, lightweight pull suited for frequent cabinet hardware use.
  • Base Dimensions: 5/8" base dimension at the mounting posts supports a clean, finished installation against the cabinet surface.
  • Thread / Screw Size: M4 thread screw size for proper mounting hardware compatibility.
  • Contemporary Style: Clean, modern lines consistent with the overall Monza collection design language.
  • Monza Collection: Part of the Monza collection, allowing coordination with other cabinet hardware in the same design family.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Overall: 13-5/8"
  • Thread / Screw Size: M4
  • Product Dimension: 5/8"
  • Product Projection: 1-1/4"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 12"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Residential Furniture
  • Commercial Millwork
  • Office Casework
  • Hospitality Furnishings
  • Retail Display Cabinetry

Why Schaub Monza?

The Schaub Monza collection pairs aluminum construction with a contemporary design profile for cabinet hardware that performs as well as it looks. With a 12" center to center span, 13-5/8" overall length, 1-1/4" projection, and M4 thread compatibility, the 211096 cabinet pull is built for precise, reliable installation across kitchen, bath, and commercial cabinetry projects where consistent sizing and a clean contemporary look matter.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Monza
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
13-5/8"
Thread / Screw Size:
M4
Product Function:
Cabinet Pull
Product Dimension:
5/8"
Product Projection:
1-1/4"
Product Style:
Contemporary
Product Material:
Aluminum
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
12"
Department:
Door Hardware

Schaub 211096-MA – Frequently Asked Questions

1) What size screws does the Monza cabinet pull take?
M4 machine screws. That is the metric thread, so North American 8-32 screws will not thread into it. If your drawer fronts are thicker than standard (applied panels, doubled-up slab fronts), plan on longer M4 screws to reach through.
2) I need a shorter pull for drawers that can't take a 12 inch center-to-center spacing. What else works?
The Schaub 211096 Monza pull is fixed at 12 inch center-to-center with a 13-5/8 inch overall length, so it needs a drawer face wide enough to carry that spread. For narrower fronts, the Trimco 553 Series drawer pulls are built at 3 inch center-to-center, and the Trimco 562 Series is offered in 3-1/2 inch, 4 inch, and 96mm center-to-center options. The Deltana SBP35 Modern Square Bar Pull covers 3-1/2 inch spacing in solid brass. All three are drilled on two screw centers the same way, so the choice comes down to which hole spacing your drawer fronts already carry.
3) The Monza is aluminum. What is the closest solid brass alternative in a modern bar profile?
The Schaub 211096 Monza pull has an aluminum base material with a 1-1/4 inch projection. If the specification calls for forged solid brass instead, the Omnia 1970 Modern Cabinet Pull is forged solid brass and carries the same 1-1/4 inch projection, so it stands off the door face identically. The Omnia 1969 and Omnia 1971 are also forged solid brass modern pulls but project 1-3/16 inch, a slightly tighter reach behind the pull.
4) Will an Omnia 1968/102 work as a drop-in replacement for the Monza 211096?
No. The Omnia 1968/102 is a forged solid brass modern cabinet pull on 4 inch center-to-center spacing, while the Schaub 211096 Monza is drilled at 12 inch center-to-center. The existing two holes will not line up and the cabinet face would need to be re-drilled and filled. If you are replacing Monza pulls in place, stay with a 12 inch center-to-center pull; the Omnia 1968/102 is the right choice only on fronts already bored at 4 inch centers.
5) How far does the Schaub Monza pull stand off the drawer front?
Projection is 1-1/4 inches, with a 5/8 inch base dimension. That gives enough hand clearance for a gloved grip on a large drawer, and it is worth checking against adjacent appliance panels or an inside corner run so the pull does not collide when a door swings.
6) What is the Monza pull made of, and how does that compare to solid brass pulls?
Aluminum. It is lighter than a forged brass pull of the same size, which matters on a 13-5/8 inch bar. If you specifically want solid brass in a modern bar profile, the Omnia 1970 Cabinet Pull is a forged solid brass option with the same 1-1/4 inch projection, and the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inches center-to-center.
7) What finishes does the Schaub Monza 211096 come in?
Four: Magenta (MA), Matte Black (MB), Matte Green (MG), and Signature Satin Brass (SSB). Three of those are color finishes rather than metal tones, so if you are matching an existing kitchen run, order one piece first and check it against the cabinetry in the actual room light before committing to a full set.
8) I need smaller pulls to match this on the upper cabinets. What else works with a Monza run?
The Monza collection is the place to look first for shorter center-to-center sizes in the same profile and finish. If you are mixing in knobs or short pulls from another line, the Emtek SELECT cabinet pull range (Schaub Collection) and the Emtek Bar Cabinet Pull are modern bar profiles, and Orca Hardware's Bachelor Collection round knobs at 1-1/4 inch diameter cover the knob side. Finish naming differs between brands, so an exact match to Matte Green or Signature Satin Brass is unlikely outside Schaub.
9) For an appliance or tall pantry door, is the Monza the right long pull or should I look at a T-bar?
The Schaub 211096 Monza runs 13-5/8 inch overall on 12 inch centers with a 5/8 inch base dimension and a 1-1/4 inch projection, which suits a long appliance or pantry front. If you want a heavier grip section instead, the Orca Hardware CK-12001 T-Pull Bar is a steel pull with a 2 inch bar width in satin nickel. The Monza is aluminum and is offered in Matte Black, Matte Green, Signature Satin Brass, and Magenta, so the decision is usually finish range versus the steel T-bar's wider grip.
10) Is the Monza a traditional or contemporary looking pull?
Contemporary. It is a clean bar profile with a 5/8 inch base and 1-1/4 inch projection, not a period piece. For a traditional or period kitchen, the Emtek Art Deco Cabinet Pull or the Emtek Alexander Cabinet Pull are the decorative alternatives.
How fast can I get the Schaub 211096-MA delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 211096-MA come with a warranty?
Absolutely. The Schaub 211096-MA is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 211096-MA?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 211096-MA from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!