Schaub 224 320mm Center to Center Classico Cabinet Pull

Yes. The Classico 224 pull is drilled on 320 mm centers, so it drops onto cabinet fronts already bored at 320 mm (the standard metric spacing on European-built frameless boxes). Overall length is 13-1/8 inches, so the pull extends roughly an inch and a half past each screw hole. Check that the extra length clears the door edge and any adjacent pull before you order a run.

The Schaub 224 Classico cabinet pull has a zinc base material. If solid brass construction is what the job calls for, the Omnia 1968/102 modern cabinet pull is forged solid brass with 4 inch center-to-center spacing, and the Deltana SBP35 modern square bar pull is heavy-duty solid brass at 3-1/2 inches. Both are much shorter pulls than the Schaub 224, which is 320 mm center to center and 13-1/8 inches overall, so they suit drawer fronts and doors where a long appliance-scale pull would overwhelm the face.

The Schaub 224 Classico is a contemporary-style pull at 320 mm center to center and 13-1/8 inches overall, which is more length than a narrow drawer front will carry. For short spans, the Trimco 553 series drawer pulls are 3 inch center to center, and the Trimco 562 series offers 3-1/2 inch, 4 inch, and 96 mm center-to-center options, so a run of narrow drawers can be picked to the hole spacing already bored.

They are different parts. The Schaub 224 is a Classico collection cabinet pull at 320 mm center to center with a 7/8 inch projection and M-4 metric screws. The Emtek 8405 is from the Emtek SELECT series in Emtek's Schaub collection and is catalogued as a cabinet knob or pull, as are the Emtek Alexander, Art Deco, and Bar cabinet pulls in that same collection. The shared Schaub name across those Emtek series does not mean shared hole spacing, so order to the center-to-center measurement rather than to the collection name.

Projection is 7/8 inch, with a 5/8 inch base dimension where the post meets the front. That is enough hand clearance for a gloved grip but shallow enough that the pull will not catch on a passing hip in a tight galley or a corridor kitchenette. In a multi-family unit turnover, a 7/8 inch projection is a safe replacement depth for most existing bar pulls.

Seven: Smooth Satin Nickel, Polished Chrome, Matte Chrome, Gun Metal, Matte Black, Matte White and Signature Satin Brass. All seven are available at the 320 mm size, so if you are standardizing a building on one pull profile you can still run different finishes per unit type or per floor without changing the boring.

Pulls and knobs solve different problems. A 320 mm pull like the Classico 224 gives a two-hand or full-fist grip, which is what you want on heavy pantry doors, appliance panels and loaded drawers, and it reads as a strong horizontal or vertical line on the elevation. Knobs suit small doors and light drawers and cost less to install because there is only one hole to bore. If a knob is the right call, the Orca Bachelor Collection round knob and round ring knob are both 1-1/4 inch diameter, and the Blackcomb square knob is 25 mm.

The Schaub 224 Classico projects 7/8 inch off the face. For more grip clearance, the Omnia 1970 modern cabinet pull has a 1-1/4 inch projection, and both the Omnia 1969 and Omnia 1971 modern cabinet pulls have a 1-3/16 inch projection, all in forged solid brass. The extra projection gives a work glove or a full hand more room behind the bar on a loaded drawer.

No. The Schaub 224 Classico is a two-hole cabinet pull bored at 320 mm center to center. The Orca Hardware Bachelor collection CK-15030 round knob and CK-16030 round ring knob are 1-1/4 inch diameter cabinet knobs, and the Blackcomb CK-17025 square knob is 25 mm diameter, all single-screw knobs. Swapping a knob onto a face already drilled for a 320 mm pull leaves an open hole, so knobs are a choice made before boring, not a drop-in replacement.

The Orca Hardware CK-12001 T-pull bar is steel with a 2 inch bar width in satin nickel. The Schaub 224 Classico is a zinc-base pull offered in seven finishes including smooth satin nickel, polished chrome, matte black, and signature satin brass. A property manager standardizing a large casework run on one finish has more finish latitude with the Schaub 224, while the Orca CK-12001 is the steel-bodied option where a single satin nickel finish is all the spec calls for.

Both are Schaub designs. The Classico 224 is the contemporary Classico profile at 320 mm centers. The Emtek Schaub Collection covers different design families, the Alexander, Art Deco, Bar, and the Emtek SELECT 8405 knob and pull line, so those are where you go for a different look rather than a different size of the same pull. If the design intent on the drawing calls out Classico specifically, the 224 is the piece.

Within the Classico collection the profile stays the same across sizes, so mixing lengths on one kitchen keeps a single look as long as you hold one finish across the run. Where that fails is mixing collections, since the Classico contemporary profile will not visually match a bar pull like the Orca CK-12001 T-Pull with its 2 inch bar width. Pick the collection first, then vary the length by front size.

No. The SDC SP50 is a 50 mm spindle, a door controls part, not cabinet hardware. The Schaub 224 Classico is a cabinet pull with 320 mm center-to-center hole spacing and M-4 metric screws. Nothing about the SP50 mounts to a cabinet face or a drawer front, so it is not an alternative to the Schaub 224 under any spec.