Schaub 2360 96mm Center to Center Mosaic Cabinet Pull

Two straightforward swaps at the same 96 mm boring: the Trimco 562 Series drawer pull is offered in a 96mm center-to-center option alongside 3-1/2 inch and 4 inch, and the Emtek SELECT 8405 cabinet pull from the Schaub collection sits in the same design family if you want to stay close to the Mosaic styling. The Trimco 553 Series is 3 inch centers only, so it is not a drop-in for 96 mm holes.

The Schaub 2360 Mosaic pull has a zinc base material. If a job spec calls for solid brass, the Deltana SBP35 Modern Square Bar Pull is heavy-duty solid brass at 3-1/2 inch, and the Omnia 1968/102 Modern Cabinet Pull is forged solid brass at 4 inch center to center. Both differ from the 2360 on hole spacing, so a brass swap means new bores unless the cabinet is drilled to match.

The Trimco 562 Series drawer pulls include a 96mm center-to-center option, so they land on the same hole spacing as the Schaub 2360 Mosaic pull and can go into existing 96mm bores without redrilling the door or drawer front. The Trimco 562 is a drawer pull series; the Schaub 2360 is a contemporary Mosaic collection pull in zinc. Confirm hole spacing on the cabinet before ordering either.

The Schaub 2360 Mosaic pull is a two-hole pull at 96 mm center to center, so it needs a pair of bores. For a single-bore front, the Orca Hardware CK-15030 Bachelor Collection round cabinet pull knob and the CK-16030 round ring knob are both 1-1/4 inch diameter knobs, and the CK-17025 Blackcomb Collection square knob is 25mm diameter. Those mount on one hole rather than two.

Satin Nickel is the only finish offered on the 2360 Mosaic pull. If you're matching a run of cabinetry and need a different finish in the same 96 mm spacing, you're looking at a different model or collection rather than another finish of this one.

A pull like the 2360 spans two holes at 96 mm centers, gives you a full-hand grip, and is what most people want on drawers and tall doors. A knob is one hole, easier to lay out and easier to replace, and it suits small doors: the Orca Hardware Bachelor Collection round knob at 1-1/4 inch diameter or the Blackcomb square knob at 25mm are the knob route. If you want a squared-off modern bar instead, the Deltana SBP35 square bar pull at 3-1/2 inch or the Orca CK-12001 T-pull bar with a 2 inch bar width are the bar-style options.

The Schaub 2360 is a contemporary Mosaic collection pull. For a plainer bar shape in the same contemporary direction, the Emtek Bar Cabinet Pull in the Schaub Collection is a bar-profile cabinet pull, and the Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width in steel with a satin nickel finish. Satin Nickel is also the finish the Schaub 2360 is offered in, so a mixed run of the two reads consistently.

The Schaub 2360 is the Mosaic collection in a contemporary style. For a more ornamented look from the same maker's range, the Emtek Alexander Cabinet Pull and the Emtek Art Deco Cabinet Pull are both Schaub Collection cabinet pulls in their own series, and the Emtek 8405 Select is a Schaub Collection knob-and-pull line. Any of them changes the profile while staying inside the same design family.

No. The SDC SP50 is a 50MM spindle used in door controls, not a cabinet pull, and it has no center-to-center mounting pattern to line up with a drawer front. The Schaub 2360 is a cabinet pull mounted through the front at 96 mm center to center with M-4 metric screws. For a pull substitution, stay with cabinet pulls such as the Trimco 562 Series, which carries a 96mm center-to-center option.

Standardizing means picking one center-to-center and holding it. The Schaub 2360 Mosaic pull is 96 mm center to center and the Trimco 562 Series carries a 96mm option, so those two can share a bore pattern across a fleet of cabinets. The Trimco 553 Series at 3 inch and the Omnia 1968/102 at 4 inch are different spacings and would each require their own drilling standard.

Yes. The 2360 Mosaic is a two-hole pull on 96 mm centers, so it mounts the same way on a door stile or a drawer front. On drawers the usual practice is horizontal centered on the front, on doors vertical near the leading edge. Only thing to check is that your drawer front has enough clear width to carry the 96 mm boring plus the pull ends.

The Mosaic is a contemporary-style pull in Satin Nickel, so it reads clean against slab and flat-panel doors. For a property manager standardizing across units, note it's a Schaub Mosaic collection piece, so ordering more of the same model is how you keep the fleet consistent rather than trying to eye-match another brand's satin nickel.

Yes. Schaub publishes a Proposition 65 warning for this product through their product stewardship page, which applies to the zinc-based construction. For California jobs, that notice needs to pass through to the end customer.