Schaub 255 Siena Cabinet Pull,...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$26.00
$15.15
Schaub 255 96mm Center to Center Siena Cabinet Pull

Schaub 255 Siena Cabinet Pull, 96mm Center to Center, Zinc, Rustic Style

(No reviews yet) Write a Review

Model: 255-ABZ
From the Siena Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$26.00
$15.15
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 255 Siena Cabinet Pull, 96mm Center to Center, Zinc, Rustic Style

The Schaub 255 Siena Cabinet Pull is a rustic style cabinet pull from the Siena collection, offering 96mm center to center mounting for straightforward installation on cabinets and drawers. Crafted from zinc with a 1-3/8 projection, this pull measures 4-3/8 overall with a 5/8 base dimension and mounts using an 8/32 thread x 1 screw size. California residents should note the Proposition 65 Warning associated with this product.

Key Features

  • Center to Center: 96 mm center to center spacing allows this pull to align with standard cabinet hole patterns for straightforward installation.
  • Projection: 1-3/8 projection provides a comfortable grip while maintaining a classic profile on cabinet doors and drawers.
  • Overall Length: 4-3/8 overall length suits a range of cabinet and drawer widths in kitchen and bath settings.
  • Base Dimensions: 5/8 base dimension offers a refined backplate profile that complements the Siena collection design.
  • Base Material: Zinc construction delivers durability suited for everyday cabinet hardware use.
  • Style and Collection: Rustic style design from the Siena collection brings a warm, traditional look to cabinetry.
  • Thread / Screw Size: 8/32 thread x 1 mounting specification for compatibility with standard cabinet hardware installations.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Overall: 4-3/8"
  • Product Dimension: 5/8"
  • Product Projection: 1-3/8"
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Residential Remodeling Projects
  • Custom Cabinet Builds
  • Furniture Hardware Upgrades
  • Rustic and Traditional Interior Design

Why Schaub 255?

Schaub cabinet hardware combines zinc construction with the rustic Siena collection design to deliver dependable, attractive hardware for cabinets and drawers. The 96mm center to center spacing and 1-3/8 projection make this pull a practical choice for kitchen and bath updates seeking a warm, traditional aesthetic.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Siena
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size:
8/32 thread x 1
Overall:
4-3/8"
Product Function:
Cabinet Pull
Product Dimension:
5/8"
Product Projection:
1-3/8"
Product Style:
Rustic
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
96 mm
Department:
Door Hardware

Schaub 255-ABZ – Frequently Asked Questions

1) Will the Schaub 255 Siena pull drop into existing 96mm cabinet holes?
Yes. The Siena 255 is drilled on 96 mm center to center, so it lines up with any door or drawer front already bored at 96 mm (a very common Euro spacing). Overall length is 4-3/8 inches, so it covers a little past the two holes on each side, which hides minor chipping around old bores.
2) I need more 96mm pulls to match an existing run but want a different look. What else is spaced at 96mm?
The Trimco 562 Series drawer pull is offered with a 96 mm center to center option, so it shares the same bore spacing as the Schaub Siena 255 and can go on the same holes. It is a different design, so use it where you are treating a separate cabinet run rather than mixing within one bank of drawers.
3) Can I use a cabinet knob in place of the Schaub 255 Siena pull?
No, not without redrilling. The Schaub 255 Siena is a cabinet pull with two 8/32 thread screws on 96 mm centers. Single-hole knobs such as the Orca Hardware CK-15030 round cabinet pull knob at 1-1/4 inch diameter, the CK-16030 round ring knob at 1-1/4 inch diameter, and the CK-17025 Blackcomb square knob at 25 mm diameter all mount on one center hole, so they will not cover an existing two-hole 96 mm pattern.
4) I want a solid brass pull instead of the zinc Schaub 255 Siena. What should I look at?
The Schaub 255 Siena pull has a zinc base material. If you want forged solid brass, the Omnia 1968/102 modern cabinet pull is forged solid brass with 4 inch center-to-center spacing, and the Omnia 1969 and Omnia 1971 are forged solid brass with a 1-3/16 inch projection against the 1-3/8 inch projection on the Schaub 255. Note the Omnia 1968/102 is 4 inch on center, not 96 mm, so confirm your drilling before you swap.
5) What other cabinet pull matches the 96mm center-to-center spacing of the Schaub 255 Siena pull?
The Schaub 255 Siena pull is drilled 96 mm center to center, so an existing 96 mm bore pattern will reuse the same holes. The Trimco 562 Series drawer pulls are offered with 3-1/2 inch, 4 inch, and 96 mm center-to-center options, so the 96 mm version drops onto the same hole spacing. The Trimco is a drawer pull in a plain series rather than the rustic Siena styling, so the look changes even though the drilling does not.
6) How far does the Schaub Siena 255 stand off the cabinet face?
Projection is 1-3/8 inches, with a 5/8 inch base dimension where it meets the front. That 1-3/8 inch standoff gives a full hand grip, which matters on drawers you pull hard, but it also means it sticks out further than a low-profile bar pull, so check clearance in tight galley runs or next to an appliance door swing.
7) I need a shorter pull than the 4-3/8 inch Schaub 255 Siena for narrow drawer fronts. What works?
The Schaub 255 Siena measures 4-3/8 inch overall on 96 mm centers. For tighter drawer fronts, the Trimco 553 Series drawer pulls are 3 inch center to center, and the Trimco 562 Series includes a 3-1/2 inch center-to-center option. The Deltana SBP35 square bar pull is also offered at 3-1/2 inch.
8) Is the Emtek Schaub Collection the same hardware as the Schaub 255 Siena pull?
They are related lines but not the same part. The Schaub 255 is a Siena collection cabinet pull, while Emtek offers cabinet pulls under a Schaub Collection heading, including the Emtek 8405 Select, the Alexander series, and the Art Deco series, each catalogued as a cabinet knob/pull. If you are matching an installed Siena pull, order the Schaub 255 rather than an Emtek series, since the styling and drilling differ by series.
9) For high-traffic commercial casework, is there a heavier-duty option than the Schaub 255 Siena pull?
The Schaub 255 Siena is a zinc-base decorative pull with a 1-3/8 inch projection. For heavier service, the Deltana SBP35 is described as a heavy-duty solid brass square bar pull at 3-1/2 inch, and the Orca Hardware CK-12001 T-pull bar is a steel pull with a 2 inch bar width in satin nickel. Both change the appearance from the rustic Siena profile, so they suit back-of-house and utility casework more than a decorative kitchen.
10) I need a satin nickel finish to match existing cabinet hardware. Does the Schaub 255 Siena offer it?
The Schaub 255 Siena pull is offered in Ancient Bronze (ABZ) and Vibra Nickel (VN). If the job calls specifically for satin nickel, the Orca Hardware CK-12001 T-pull bar is supplied in satin nickel steel, though it is a 2 inch bar-width T-pull rather than a rustic Siena profile.
11) Is the Schaub Siena 255 the right pull for a rustic or farmhouse kitchen?
That is exactly what it is built for. Siena is Schaub's rustic collection, and the 255 reads as a textured, hand-forged style pull rather than a clean modern bar. If you want the opposite look, the modern square bar and tube pulls (for example the Deltana SBP Series or the Omnia 1969, 1970 and 1971) are the straight-line alternative.
12) The SDC SP50 spindle came up while I was shopping cabinet pulls. Is it an alternative to the Schaub 255 Siena?
No. The Schaub 255 Siena is a cabinet pull for casework doors and drawers. The SDC SP50 is a 50 mm spindle classified under door controls and is a lock trim component, not a cabinet pull, so it is not a substitute for the 255.
How fast can I get the Schaub 255-ABZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 255-ABZ come with a warranty?
Absolutely. The Schaub 255-ABZ is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 255-ABZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 255-ABZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!