Schaub 258 Siena Collection Ru...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$38.00
$25.53
Schaub 258 5" Center to Center Siena Bail Cabinet Pull

Schaub 258 Siena Collection Rustic Bail Cabinet Pull, 5" Center to Center

(No reviews yet) Write a Review

Model: 258-ABZ
From the Siena Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$38.00
$25.53
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 258 Siena Collection Bail Cabinet Pull, 5" Center to Center

The Schaub 258 Siena Collection Bail Cabinet Pull is a rustic style cabinet pull built with a zinc base material. This pull features a 5" center to center hole spacing, a 1-3/4" projection from the mounting surface, and an overall length of 6-1/4", making it suited for a range of cabinet door and drawer applications. A 1-1/4" base dimension provides a stable mounting footprint, and the pull installs using an 8/32 thread x 1 screw. The bail style design of this Siena collection pull brings a rustic character to kitchen and bathroom cabinetry while remaining functional for everyday use.

Key Features

  • Center to Center Spacing: 5" center to center mounting holes for straightforward installation on cabinet doors and drawers.
  • Projection: 1-3/4" projection from the cabinet surface provides comfortable grip clearance.
  • Overall Length: 6-1/4" overall length suited for standard cabinet and drawer fronts.
  • Base Dimensions: 1-1/4" base dimension offers a secure mounting footprint.
  • Base Material: Zinc construction for the pull body.
  • Style and Collection: Rustic style pull from the Siena collection, featuring a bail design.
  • Thread / Screw Size: 8/32 thread x 1 mounting thread.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Overall: 6-1/4"
  • Product Dimension: 1-1/4"
  • Product Projection: 1-3/4"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 5"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Furniture and Dresser Drawers
  • Residential Remodeling Projects
  • Custom Cabinetry Installations
  • Closet and Storage Systems

Why Schaub 258?

Schaub Siena collection cabinet pulls deliver a rustic bail design built with a zinc base material for dependable everyday use. The 5" center to center spacing and 1-3/4" projection make this pull a practical choice for cabinet and drawer hardware upgrades in residential settings. Each piece reflects consistent sizing and finish quality expected from Schaub cabinet hardware collections.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Siena
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
6-1/4"
Thread / Screw Size:
8/32 thread x 1
Product Function:
Cabinet Pull
Product Dimension:
1-1/4"
Product Projection:
1-3/4"
Product Style:
Rustic
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
5"
Department:
Door Hardware

Schaub 258-ABZ – Frequently Asked Questions

1) Will the Schaub 258 Siena pull drop into existing 5 inch center-to-center holes?
Yes. The Schaub 258 Siena bail pull is drilled on 5 inch centers, so it mounts straight into an existing 5 inch bore pattern with no new holes. Overall length is 6-1/4 inches, so it covers a little past each hole but not much, which matters if you are replacing a longer pull that hid old drill marks.
2) What screws come with the Schaub 258 and will they work on thicker drawer fronts?
The 258 uses 8/32 thread screws at 1 inch length, which is the standard cabinet machine screw size. One inch covers typical 3/4 inch drawer fronts and doors. If you are going through a thicker front, a false front, or an applied panel, you will need longer 8/32 machine screws.
3) Is the Schaub 258 solid brass or plated?
The base material is zinc, not solid brass. For a spec that calls out forged solid brass, look at the Omnia 1968/102, which is forged solid brass on 4 inch centers, or the Deltana SBP35 square bar pull in solid brass. Those are modern profiles though, not the rustic bail look of the Siena.
4) What is the closest alternative to the Schaub 258 Siena bail pull if I want the same rustic look in a solid brass pull?
The Schaub 258 is a zinc-base bail pull in the Siena collection with 5 inch center-to-center spacing. If solid brass construction is the priority, the Omnia 1968/102 is a forged solid brass cabinet pull with 4 inch center-to-center spacing, and the Omnia 1970 is forged solid brass with a 1-1/4 inch projection against the Schaub 258's 1-3/4 inch projection. The trade-off is hole spacing: the Omnia 1968/102 at 4 inch centers will not drop into existing 5 inch holes, so plan on new boring or a backplate.
5) I need a lower-profile cabinet pull than the Schaub 258 for a tight drawer run - what should I use instead?
The Schaub 258 bail pull projects 1-3/4 inch off the face, which is a lot of knuckle room in a galley or a narrow passage. For a shallower pull, the Omnia 1969 and Omnia 1971 are both forged solid brass with a 1-3/16 inch projection, and the Omnia 1970 sits at 1-1/4 inch. All three give up the rustic Siena bail styling for a modern bar profile.
6) Can I use a Trimco 553 or 562 drawer pull in place of the Schaub 258?
Only if you are re-drilling. The Schaub 258 is a 5 inch center-to-center pull with an overall length of 6-1/4 inch. The Trimco 553 series drawer pulls are 3 inch center-to-center, and the Trimco 562 series comes in 3-1/2 inch, 4 inch, and 96mm center-to-center. None of those match 5 inch centers, so the Trimco pulls suit new drawer fronts or an institutional look rather than a straight swap into existing Schaub 258 boring.
7) How much hand clearance does the Schaub Siena bail pull give?
Projection is 1-3/4 inches off the face of the door or drawer, which is generous for a bail pull and leaves room to get a full grip with gloved hands. Keep that number in mind near appliance panels or in a tight galley run, since the bail stands proud of shallower bar pulls.
8) What finishes does the Schaub 258 Siena pull come in?
Two: Ancient Bronze (ABZ) and Vibra Nickel (VN). Ancient Bronze is the darker, warmer option that suits the rustic styling of the Siena collection; Vibra Nickel gives a brushed silver read for mixed-metal kitchens.
9) I need to match the Siena look on smaller drawers. What else works?
The 258 is a fixed 5 inch center-to-center bail, so it will not shrink. For shorter runs on the same job, Emtek's Schaub Collection pulls (the Emtek 8405 SELECT, Alexander, Art Deco and Bar cabinet pulls) come out of the same Schaub design lineage and are the closest family to coordinate with. Trimco's 553 Series drawer pulls at 3 inch centers and the 562 Series at 3-1/2 inch, 4 inch and 96mm are straightforward options where you just need a smaller spacing.
10) What looks like a substitute for the Schaub 258 but will not work on the same holes?
The Orca Hardware Bachelor Collection round cabinet pull knob at 1-1/4 inch diameter, the Bachelor round ring knob at 1-1/4 inch diameter, and the Blackcomb square knob at 25mm are all cabinet knobs - single-screw mounts, not two-hole pulls. The Schaub 258 is a two-hole cabinet pull on 5 inch centers, so swapping to any of those knobs leaves an open hole in the front. If you want to hold the existing 5 inch boring, stay with a pull.
11) What is the footprint of the mounting posts on the Siena 258?
Each base measures 1-1/4 inches, so the two posts sit on 5 inch centers with roughly that much material around each hole. That gives you cover over a slightly enlarged or chipped bore, but it will not hide holes drilled at a different spacing.
12) Is a bail pull like the Schaub 258 a good choice for a rental or high-traffic kitchen?
A bail pull swings on its posts rather than sitting rigid, which is part of the rustic character but means there is a moving joint at each base. For turnover units where you want nothing that can loosen or rattle, a fixed bar pull is the simpler standard, such as the Deltana SBP35 square bar pull or the Orca CK-12001 T-pull bar in steel with a satin nickel finish. Choose the 258 when the Siena rustic styling is the point.
How fast can I get the Schaub 258-ABZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 258-ABZ come with a warranty?
Absolutely. The Schaub 258-ABZ is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 258-ABZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 258-ABZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!