Schaub 262 96mm Center to Center French Farm Pull

Yes. The 262 French Farm pull is drilled 96 mm center to center, so it drops onto existing 96 mm holes with no new boring. Overall length is 6-1/2 inches, so allow for the extra material past the mounting posts on narrow drawer faces or tight stile widths.

The 262 uses 8/32 thread screws, 1 inch long. That length suits a standard 3/4 inch cabinet door or drawer front. Thicker fronts, or a drawer box front plus applied face, need longer 8/32 machine screws ordered separately.

The Schaub 262 French Farm pull is drilled 96 mm center to center. The Trimco 562 Series drawer pulls are offered in a 96mm center-to-center option as well, so they land on the same existing drill holes. The difference is styling and range: the Schaub 262 is a traditional-style pull from the French Farm collection with a 6-1/2 inch overall length and 8/32 thread x 1 inch long screws, while the Trimco 562 is a drawer pull series that also lists 3-1/2 inch and 4 inch center-to-center spacings.

The Schaub 262 French Farm pull has a zinc base material. If the specification calls for solid brass, the Omnia 1968/102 is a forged solid brass cabinet pull with 4 inch center-to-center spacing, and the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inch. Note that both of those are modern-style bar pulls with different hole spacing, so they will not drop onto holes drilled at the Schaub's 96 mm centers, and the look is contemporary rather than the traditional French Farm profile.

Projection is 7/8 inch, which is enough finger clearance for a gripped pull on an inset or overlay door without pushing the handle far into a walkway. The pull body measures 7/8 x 1/2 inch.

Three: Ancient Bronze (ABZ), Antique Nickel (AN), and Empire Bronze (EBZ). All three are warm traditional tones, so if you are matching other openings or existing French Farm pieces in a kitchen, order the same suffix across the run rather than mixing.

No. The 262 French Farm pull is zinc base material with a plated finish. If a project spec calls for forged solid brass, look at the Omnia 1968/102 or the Deltana SBP35, both of which are specified as solid brass.

The Schaub 262 French Farm pull has a 7/8 inch projection off the face of the drawer. For more hand clearance, the Omnia 1970 is a forged solid brass cabinet pull with a 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 both list a 1-3/16 inch projection. All three are modern-profile pulls in solid brass rather than the traditional zinc French Farm design, so confirm the center-to-center spacing against your existing drilling before ordering.

It belongs to Schaub's French Farm collection, in a traditional style, so it coordinates with other French Farm pieces. Emtek also lists Schaub Collection cabinet pulls, including the Alexander and Art Deco series, if you want a related but different profile.

The Schaub 262 is a traditional-style zinc pull from the French Farm collection. For a plainer look, the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel, and the Trimco 553 Series is a drawer pull at 3 inch center to center. Both differ in hole spacing from the 262's 96 mm centers, so plan the drilling accordingly.

A knob mounts on a single screw, so it will not reuse the two holes drilled for the Schaub 262 French Farm pull at 96 mm center to center. If you are working from a fresh door face, Orca Hardware offers the Bachelor Collection round cabinet knob at 1-1/4 inch diameter, the Bachelor Collection round ring knob at 1-1/4 inch diameter, and the Blackcomb Collection square knob at 25mm diameter. Many kitchens mix knobs on doors with pulls like the 262 on drawers.