Schaub 263 8" Center to Center French Farm Pull

The 263 uses 8/32 thread screws, supplied at 1 inch length. That covers a standard 3/4 inch drawer front with thread to spare. If you are mounting to a thicker applied front, a false front with a backer, or through a drawer box face, you will need longer 8/32 machine screws, which are a standard size at any supply house.

The Schaub 263 is a traditional-style cabinet pull from the French Farm collection, cast in zinc with an 11-3/4 inch overall length over an 8 inch center-to-center spacing. For a modern profile, the Omnia 1969 and Omnia 1971 are forged solid brass cabinet pulls with a 1-3/16 inch projection, and the Omnia 1970 is a forged solid brass pull with a 1-1/4 inch projection. The Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inches. All are cabinet pulls, so the decision is style and material rather than function.

The Schaub 263 is drilled at 8 inch center-to-center, which suits wide drawers and full-height doors. For narrower fronts, the Trimco 553 drawer pull is 3 inch center-to-center and the Trimco 562 comes in 3-1/2 inch, 4 inch and 96mm center-to-center. The Omnia 1968/102 is a forged solid brass pull at 4 inch center-to-center, and the Deltana SBP35 is a 3-1/2 inch square bar pull. Any change in center-to-center means a new drilling pattern, not a drop-in swap.

Projection is 1-3/8 inches. That is enough hand clearance for a gloved grip and it is the number that matters where a drawer sits next to a wall return, an appliance panel, or a door that swings past it. The pull's base measures 2-1/2 inches.

Three: Ancient Bronze (ABZ), Antique Nickel (AN), and Empire Bronze (EBZ). All three are within the French Farm collection, so if you are matching knobs or shorter pulls elsewhere in the kitchen, order them in the same collection and finish code to keep the plating consistent across the run.

Yes. Emtek carries Schaub collection cabinet pulls, including the Emtek 8405 Select cabinet pulls and the Emtek Alexander, Art Deco and Bar cabinet pulls, all listed as Schaub collection and all functioning as cabinet knob/pull. They are separate series from the Schaub 263 French Farm pull, so confirm the center-to-center you need matches your existing drilling before ordering against the Emtek part.

The Schaub 263 is a two-hole cabinet pull with 8 inch center-to-center spacing, so it needs a pair of holes. For single-hole knobs on upper doors, the Orca Hardware Bachelor Collection CK-15030 is a round cabinet knob at 1-1/4 inch diameter, the CK-16030 is a round ring knob at 1-1/4 inch diameter, and the Blackcomb CK-17025 is a square knob at 25mm diameter. Those are knobs rather than pulls, so they bore one hole instead of two.

The Schaub 263 French Farm pull comes in Ancient Bronze (ABZ), Antique Nickel (AN) and Empire Bronze (EBZ), so two of the three are bronze tones suited to traditional cabinetry. If a nickel tone is what you are matching instead, the Orca CK-12001 T-pull bar is a steel pull in satin nickel, though it is a contemporary bar profile rather than a traditional one.

Both are cabinet pulls, but they are not the same kind of part. The Schaub 263 is a traditional French Farm pull in zinc with a 1-3/8 inch projection and 8/32 thread screws. The Orca CK-12001 is a T-pull bar in steel with a 2 inch bar width and a satin nickel finish. If the cabinetry is period or traditional, the 263 is the match; the CK-12001 suits a contemporary bar-pull look.