Schaub 934 5" Center to Center French Court Cabinet Pull

It is handed. The Schaub 934 is ordered as either Left-Handed or Right-Handed, so the asymmetric French Court form leans the correct direction on the drawer or door face. If you are running a kitchen with pulls on both sides of a range or a mirrored pair of doors, order in matched sets rather than assuming one part number covers both. Every finish is offered in both hands.

Yes. The 934 is drilled on 5 inch centers, so it lands on standard 5 inch bore spacing without redrilling. Overall it measures 2-3/8 x 7-1/8 inches, which means about an inch of extra material beyond the mounting holes at each end, so check that the old pull was not shorter than the face you are covering if you are hiding an existing finish line.

The Schaub 934 is a decorative solid brass pull from the French Court collection in the Symphony Elegance style, with a 5 inch center-to-center and a 1-1/2 inch projection. For a plain modern profile instead, the Omnia 1968/102 is a forged solid brass cabinet pull with 4 inch center-to-center spacing, and the Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inch. Both keep the solid brass construction but drop the ornamental French Court shape, and both sit at a shorter hole spacing, so existing 5 inch drilling would need to be redone.

The Schaub 934 is fixed at 5 inch center-to-center with a 2-3/8 inch by 7-1/8 inch overall footprint, so a narrow drawer front will not take it. For shorter spacing, the Trimco 553 Series drawer pulls run 3 inch center-to-center, and the Trimco 562 Series offers 3-1/2 inch, 4 inch, and 96mm center-to-center options. Those are plainer drawer pulls rather than the decorative French Court profile, so expect a different appearance if you mix them into the same run.

The Schaub 934 projects 1-1/2 inch from the face of the cabinet. For less reach into the walkway, the Omnia 1970 is a forged solid brass modern pull with a 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 are both forged solid brass at 1-3/16 inch projection. All three are modern profiles rather than the French Court decorative shape, and they are solid brass like the 934.

Projection is 1-1/2 inches. That is a deep-grip pull, which is comfortable for heavy drawers but worth checking where cabinets sit next to a wall return, an appliance panel, or a door that swings past. In a tight galley run the knuckle clearance is the thing to verify, not the length.

Solid brass through the body. For a hospitality or high-traffic residential job where pulls get grabbed thousands of times, that matters more than the finish name, since brass keeps its shape and thread integrity in the 8/32 tapped boss.

No. The Schaub 934 is a French Court collection pull in the Symphony Elegance style with a 5 inch center-to-center and solid brass construction. Emtek's Schaub Collection items are separate series under the Emtek name, such as the Emtek 8405 Select cabinet pulls, the Emtek Alexander cabinet pull, the Emtek Art Deco cabinet pull, and the Emtek Bar cabinet pull. They are their own designs with their own series names, not a rebadge of the 934, so confirm center-to-center before treating one as a match for an existing 934 hole pattern.

The Schaub 934 is solid brass in a decorative French Court design. If a utilitarian steel pull suits the application better, the Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width in steel with a satin nickel finish. That is a plain bar profile rather than an ornamental one, and steel rather than brass, so it will not blend into a run of French Court pulls.

The 934 belongs to the Schaub French Court collection in the Symphony Elegance style, so coordinating pieces come from that same collection. Emtek also carries Schaub-collection cabinet hardware, including the Emtek 8405 Select cabinet pulls and the Alexander and Art Deco cabinet pulls, if you are blending decorative lines across a kitchen and a butler's pantry.