Schaub 987 3-1/2" Center to Center French Court Cabinet Pull

The Schaub 987 French Court pull is a solid brass cabinet pull on 3-1/2 inch centers with a 5/8 inch projection. For the same 3-1/2 inch hole spacing from another maker, the Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inch, and the Trimco 562 series drawer pulls offer a 3-1/2 inch center-to-center option alongside 4 inch and 96mm. Both drop onto existing 3-1/2 inch drilling, but they are plain bar and drawer-pull shapes rather than the ornamented French Court styling.

The Schaub 987 is fixed at 3-1/2 inch center to center, so it will not land on 3 inch drilling without redrilling the drawer front. The Trimco 553 series drawer pulls are built at 3 inch center to center and will fit that existing spacing directly.

Projection is 5/8 inch. That is a low-profile stand-off, so it works in tight galley runs or next to an adjacent appliance where a taller pull would catch a sleeve. It also means a gloved hand or a full grip is tighter than on a deeper bar pull.

Solid brass base material, not zinc die-cast. For a remodel or a hospitality spec where pulls get daily traffic, that matters for thread durability at the screw boss and for how the finish wears at the grip point.

Three: Monticello Brass (MBR), Monticello Silver (MSL), and White Brass (WB). If you are matching hardware across a whole kitchen or a run of units, order all positions in one finish code at once, since these are decorative living finishes rather than a plated commodity.

The Schaub 987 is drilled at 3-1/2 inch center to center, which suits smaller drawers and doors. For wider fronts, the Omnia 1968/102 is a forged solid brass modern pull on 4 inch center-to-center spacing, and the Trimco 562 series includes 4 inch and 96mm options in addition to 3-1/2 inch. Note the wider spacing needs new drilling if the fronts are already bored for 3-1/2 inch.

The Schaub 987 belongs to the French Court collection in the Symphony Elegance style. For a plainer look, the Emtek Bar cabinet pull in the Schaub Collection and the Deltana SBP35 modern square bar pull are straight bar profiles, and the Omnia 1969, 1970 and 1971 are modern forged solid brass pulls. Confirm center-to-center against your drilling before ordering, since those series are offered in their own spacing ranges.

The Schaub 987 projects 5/8 inch off the face. For a deeper grip, the Omnia 1970 modern pull carries a 1-1/4 inch projection and the Omnia 1969 and 1971 each carry a 1-3/16 inch projection, all in forged solid brass. Those deeper profiles help where a hand needs to clear a face frame or an adjacent appliance.

The 987 belongs to Schaub's French Court collection, in the Symphony Elegance style. Staying inside that collection is how you keep the ornament and finish consistent across doors, drawers, and appliance panels in the same room.

Emtek's Schaub Collection carries several profiles: the Art Deco cabinet pull, the Alexander pull, and a plain Bar pull. The Bar is the simplest of the three if you want a clean run, while Art Deco and Alexander keep a period feel closer to French Court.

Both. It is a cabinet pull, so it mounts on drawer fronts and on cabinet doors alike; the only constraint is the 3-1/2 inch hole spacing and enough flat rail width to carry it.

Yes, if you are willing to change the drilling from two holes to one. The Schaub 987 is a two-hole pull on 3-1/2 inch centers. Single-hole options include the Orca Hardware CK-15030 round cabinet knob at 1-1/4 inch diameter, the CK-16030 round ring knob at 1-1/4 inch diameter, and the CK-17025 Blackcomb square knob at 25mm diameter. A knob leaves one of the original two holes exposed, so it suits new fronts better than a retrofit.