Schaub 361 32mm Center to Center Armadio Cabinet Pull

The Schaub 361 Armadio pull has a zinc base material. If the specification calls for solid brass, the Omnia 1968/102 is a forged solid brass modern cabinet pull, and the Deltana SBP35 is a heavy-duty solid brass modern square bar pull. Both are brass-bodied modern pulls rather than zinc, so confirm the center-to-center spacing you need before swapping, since the Schaub 361 is drilled at 32 mm.

The Schaub 361 Armadio is a 32 mm center-to-center pull with a 120 mm overall length, which suits small doors and narrow drawers. For wider drawer fronts, the Omnia 1968/102 is a modern cabinet pull with 4 inch center-to-center spacing, and the Trimco 562 Series drawer pulls are offered in 3-1/2 inch, 4 inch, and 96 mm center-to-center. The Trimco 553 Series is a 3 inch center-to-center drawer pull if you need something between those.

The Schaub 361 Armadio is a two-hole pull on 32 mm centers, so it will not drop into a single-hole bore. For a single-hole knob in a comparable contemporary look, the Orca Hardware CK-17025 Blackcomb is a square cabinet knob at 25 mm, and the Orca CK-15030 Bachelor is a round cabinet knob at 1-1/4 inch diameter. The Orca CK-16030 is the round ring version of that knob at the same 1-1/4 inch diameter.

The Schaub 361 Armadio pull projects 15/16 inch off the face. Among the modern brass alternatives, the Omnia 1969 and Omnia 1971 both carry a 1-3/16 inch projection and the Omnia 1970 carries a 1-1/4 inch projection, so all three stand further off the door than the Armadio. Where clearance to an adjacent appliance or wall is tight, the 361 is the shallower of these.

Projection is 15/16 inch, so you get roughly that much space between the back of the grip and the door face for your fingers. On a cabinet next to a wall return or inside a tight appliance gap, measure that 15/16 inch before committing.

Six: Satin Nickel, Polished Chrome, Burnished Bronze, Matte Black, Matte White, and Signature Satin Brass. Matte White is the unusual one in that group, it's the option people reach for on painted or high-gloss white slab fronts where a metal finish would read too heavy.

The Armadio 361 is fixed at 32mm centers, so for wide drawer fronts you need a different model. The Omnia 1968/102 modern pull is spaced at 4 inch centers, and Trimco's 562 Series drawer pulls come in 3-1/2 inch, 4 inch, and 96mm centers. Trimco 553 Series is 3 inch centers if you only need a step up.

They are related lines, not the same part. Emtek sells Schaub Collection cabinet pulls under its own model names, including the Emtek 8405 SELECT, the Alexander, the Art Deco and the Bar pulls. The Schaub 361 Armadio is its own contemporary design at 32mm centers with a 120mm overall length. If you are matching existing hardware, match on the model, not just on the Schaub name.

The Schaub 361 Armadio is a zinc-body contemporary pull. For heavier duty in the same modern square idiom, the Deltana SBP35 is described as a heavy-duty solid brass modern square bar pull at 3-1/2 inch, and the Orca CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel. Both step away from zinc, so verify hole spacing against the existing bores before you order.

Yes, and that is the usual approach on a contemporary Armadio layout: pulls on the drawers, knobs on the upper doors. Stay within the Armadio collection so the finish and the squared-off profile match. If you want the same look from another line, Orca's Blackcomb 25mm square cabinet knob is a comparable square knob shape.

The base measures 1-9/16 x 5/16 inches. That is a small contact area, which matters if you are covering up an old mounting hole or a worn spot in the finish, it won't hide much. Two screws at 32mm centers carry the load.

The Schaub 361 Armadio is a contemporary style pull. If the millwork package calls for something more decorative, the Emtek Art Deco cabinet pull and the Emtek Alexander cabinet pull are both cabinet knob/pull offerings in the Schaub Collection, and the Emtek Bar cabinet pull covers the plain bar profile in that same collection.

No. The SDC SP50 is a 50 mm spindle in the door controls family, a trim component for lock hardware, not cabinet hardware. The Schaub 361 Armadio is a cabinet pull on 32 mm centers using M-4 metric screws 1 inch long. The two serve different applications and are not interchangeable.