Schaub 364 160mm to 192mm Center to Center Arched Armadio Cabinet Pull

The base material is zinc, not solid brass. For residential kitchens, baths, and closet millwork that's the normal construction and it takes the plated and painted finishes cleanly. If a spec calls out solid brass specifically, look at the Omnia 1968/102 or 1969 modern pulls, which are forged solid brass, or the Deltana SBP35 square bar pull in solid brass.

The Schaub 364 Armadio pull is built on a zinc base with a 1 inch projection. If you want a forged solid brass body instead, the Omnia 1970 is a modern cabinet pull in forged solid brass with a 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 are forged solid brass modern pulls at a 1-3/16 inch projection. All three sit slightly further off the door face than the 364, so check drawer and door clearance before you swap.

The Schaub 364 Armadio is specified in metric spacing at 160/192 mm center to center. If your drawer fronts are drilled on inch spacing, the Omnia 1968/102 is a modern forged solid brass cabinet pull with 4 inch center-to-center spacing, and the Trimco 562 series drawer pulls come in 3-1/2 inch, 4 inch, and 96 mm center-to-center options if you have a mix of both on the same job.

Projection is 1 inch. That is enough knuckle clearance for a gloved hand in a kitchen or a multi-family unit turnover, and it matters most on inset doors next to a wall return or on a drawer bank where two pulls sit close together.

Six finishes: Satin Nickel, Polished Chrome, Burnished Bronze, Matte Black, Matte White, and Signature Satin Brass. That's the full run, so a property manager standardizing across units or a designer running one finish through a kitchen and bath can order the same pull in every location.

The Schaub 364 is an arched Armadio pull in a contemporary style, so the grip bows away from the face and gives you a wider hand opening at the middle than at the posts. A straight bar sits parallel to the door the whole length and reads more industrial. If that's the look you want, the Orca Hardware CK-12001 T-pull bar in steel or the Emtek Bar Cabinet Pull are the straight-profile alternatives.

They are related but not interchangeable. The Schaub 364 is from the Armadio collection with a contemporary arched profile. Emtek carries a Schaub Collection of its own, including the Emtek 8405 Select cabinet pulls, the Alexander cabinet pull, the Art Deco cabinet pull, and the Bar cabinet pull, each a distinct series. If you are matching an existing run of Armadio pulls, order the Schaub 364 rather than an Emtek series, since the profiles and finish names differ between them.

Yes, a knob is a common companion to a long pull on upper or narrow doors. The Orca Hardware CK-15030 is a round cabinet knob at 1-1/4 inch diameter and the CK-16030 is the round ring version at the same 1-1/4 inch diameter, both in the Bachelor collection. The CK-17025 is a square cabinet knob at 25 mm diameter in the Blackcomb collection if you want a squared profile. Keep in mind a knob uses a single hole, while the Schaub 364 Armadio is drilled on 160/192 mm two-hole spacing.

If you want a straight run rather than the arched Armadio profile, the Emtek Bar cabinet pull from the Schaub Collection is a bar-series pull, the Deltana SBP35 is a modern square bar pull in heavy-duty solid brass, and the Orca Hardware CK-12001 is a T-pull bar in steel with a 2 inch bar width in satin nickel. The Schaub 364 arches away from the face at a 1 inch projection, so a straight bar changes both the sightline and the grip depth.

The Schaub 364 Armadio is a contemporary style pull with an arched bar profile, so it reads modern on the door. For a period look, the Emtek Art Deco cabinet pull and the Emtek Alexander cabinet pull are separate decorative series in the Schaub Collection that carry more ornament than the plain Armadio arch.