Schaub 363 128mm Center to Center Arched Armadio Cabinet Pull

The base material is zinc, finished in one of six platings or coatings. If your spec calls for forged solid brass, look at the Omnia 1968, 1969, 1970, or 1971 cabinet pulls instead, which are forged solid brass, or the Deltana SBP35 square bar pull in solid brass. Zinc die cast holds crisp arched shapes well and takes matte coatings like Matte Black and Matte White cleanly.

The Schaub 363 Armadio pull is built on a zinc base material in a contemporary style. If the specification calls for solid brass, the Omnia 1969 modern cabinet pull is forged solid brass and carries a 1-3/16 inch projection, against the 1 inch projection on the Schaub 363. The Deltana SBP35 modern square bar pull is another solid brass option, described as heavy-duty, in a 3-1/2 inch size.

The Schaub 363 Armadio is a 128 mm center-to-center pull with a 164 mm overall length. For a wider bore spacing, the Omnia 1968/102 modern cabinet pull is a forged solid brass pull with 4 inch center-to-center spacing, which is a larger hole pattern than 128 mm and will not land on the same two holes.

Projection is 1 inch from the face of the door or drawer front to the outside of the arch. That is enough grip clearance for a gloved hand and is worth checking against any adjacent appliance panel, inside corner, or wall return where a door swings past.

The 363 is the 128 mm center-to-center Armadio arched pull. Armadio is a Schaub collection, so specify the same collection in the same finish across drawers and doors to keep the profile consistent. If you want a coordinating knob for small doors, Schaub hardware is also carried under the Emtek SELECT and Schaub Collection lines, including the Emtek Bar and Alexander cabinet pulls.

The Schaub 363 is an arched pull, meaning the ends taper down to the face and the center lifts away, which reads softer than a straight bar and is a common contemporary choice on both doors and drawer fronts. A straight bar pull like the Orca CK-12001 T-pull bar or the Emtek Bar cabinet pull gives a more industrial line. For small drawers under 12 inches wide, a shorter center-to-center pull generally looks better than a 164 mm overall body.

Yes, that is a common layout - pulls on drawers and knobs on doors. The Schaub 363 Armadio is a two-hole pull at 128 mm center-to-center with M-4 metric screws 1 inch long. Single-hole knob options include the Orca Hardware Bachelor Collection round cabinet knob at 1-1/4 inch diameter, the Bachelor Collection round ring knob at 1-1/4 inch diameter, and the Blackcomb Collection square knob at 25 mm diameter. Knobs use a single bore, so the drawer and door prep differ.

The Schaub 363 is an arched profile with a 1 inch projection and a 15/16 inch by 1/4 inch base. Straight-bar alternatives include the Deltana SBP35 modern square bar pull in solid brass and the Orca Hardware CK-12001 T-pull bar, which is a steel pull with a 2 inch bar width in satin nickel. The arched Schaub gives a curved grip line; the bar pulls run flat and parallel to the drawer face.

The Schaub 363 Armadio stands 1 inch off the face. For more clearance, the Omnia 1970 modern cabinet pull carries a 1-1/4 inch projection, and both the Omnia 1969 and Omnia 1971 are listed at 1-3/16 inch projection. All three are forged solid brass.

The bar section measures 15/16 x 1/4 inch. That slim section is what gives the Armadio its flat arched profile rather than a round bar look, and it matters if you are pairing it with a narrow stile or a drawer face with limited flat area.

No. The SDC SP50 is a 50 mm spindle used in door control hardware, not cabinet hardware. The Schaub 363 Armadio is a cabinet pull that mounts with M-4 metric screws 1 inch long through two bores at 128 mm center-to-center. The two parts serve different applications entirely.