Schaub 426 6" Center to Center Fonce Bar Cabinet Pull

Yes. The Fonce 426 bar pull is drilled on 6 inch center-to-center, so it drops onto an existing pair of holes bored 6 inches apart with no new drilling. Overall length is 8 inches, so it overhangs about an inch past each screw hole.

The Fonce 426 uses 8/32 machine screws, 1 inch long. That length suits a standard 3/4 inch drawer front or door. If you are mounting through a thicker front, a false front, or a front with an applied panel, you will need longer 8/32 screws.

The Emtek Bar Cabinet Pull in the Schaub Collection is the nearest bar-form counterpart, since it is a Bar series cabinet knob/pull. The Schaub 426 Fonce is a contemporary bar pull at 6 inch center-to-center with an 8 inch overall length, a 7/8 inch base dimension, and 1-1/4 inch projection. If you want the same straight-bar look but a different collection identity, the Emtek Bar pull is the substitution to look at; if you want the Fonce two-tone treatment, the 426 offers Matte Black/Polished Nickel and Matte Black/Satin Brass combinations as well as single finishes.

For narrow stiles and small drawer fronts, step down to a shorter center-to-center pull rather than the Schaub 426 Fonce, which is drilled at 6 inch center-to-center and runs 8 inches overall. The Deltana SBP35 modern square bar pull is a 3-1/2 inch pull in the SBP series, the Trimco 553 drawer pull is 3 inch center-to-center, and the Trimco 562 series offers 3-1/2 inch, 4 inch, and 96mm center-to-center options. The Omnia 1968/102 modern pull is a forged solid brass pull at 4 inch center-to-center.

Projection is 1-1/4 inches, measured from the face of the door or drawer to the outside of the bar. That leaves enough clearance to get a full hand behind it, and it is worth checking against adjacent doors in an inside corner run so pulls do not collide when both open.

Five finishes: Matte Black, Polished Nickel, Satin Brass, and two mixed-metal combinations, Matte Black with Polished Nickel and Matte Black with Satin Brass. The two-tone options let you run one pull family while picking up two metals already in the room.

For a similar modern bar look, the Emtek Bar Cabinet Pull from the Schaub Collection is the closest relative. The Deltana SBP35 Modern Square Bar Pull is a solid brass squared-off bar at 3-1/2 inch centers, so it is a smaller pull for narrower drawers. Omnia's 1970 Modern Cabinet Pull is forged solid brass and shares the same 1-1/4 inch projection as the Fonce 426 if standoff clearance is what you are matching.

The Schaub 426 Fonce is a contemporary bar cabinet pull, so pair it with plain geometric knobs rather than decorative ones. The Orca Hardware Bachelor Collection round cabinet knob is 1-1/4 inch diameter, the Bachelor round ring knob is also 1-1/4 inch diameter, and the Orca Blackcomb Collection square cabinet knob is a 25mm square. The Emtek 8405 Select and Emtek Alexander in the Schaub Collection are catalogued as cabinet knob/pull items if you would rather keep both forms inside one collection.

The Omnia 1970 modern cabinet pull is forged solid brass with a 1-1/4 inch projection, the same standoff from the door face as the Schaub 426 Fonce. If you want a slightly tighter reveal, the Omnia 1969 and Omnia 1971 modern pulls are both forged solid brass at 1-3/16 inch projection. Projection matters where a pull sits near an adjacent door, appliance panel, or inside-corner cabinet.

The base dimension is 7/8 inch, which is the footprint of the bar and posts against the cabinet face. Combined with the 1-1/4 inch projection, it reads as a substantial contemporary bar rather than a thin wire pull.

The Schaub 426 Fonce is a contemporary bar pull. For a period or ornamented look on the same doors, the Emtek Art Deco Cabinet Pull in the Schaub Collection is an Art Deco series cabinet knob/pull, and the Emtek Alexander is an Alexander series cabinet knob/pull. Both trade the plain bar profile for a patterned one, so confirm the center-to-center you need before switching away from the 426's 6 inch spacing.