Schaub 422 12" Center to Center Fonce Appliance Pull

The Fonce 422 uses 1/4-20 threaded posts with 1 inch screws. That length suits a standard appliance door or panel prep. If your custom wood panel is thicker than the screw can reach through, you will need longer 1/4-20 machine screws, which is a common substitution on panel-ready refrigerators.

Back to back means two pulls mounted opposite each other through the same holes, one on each face. That is how you handle a glass or thin door, or a pass-through panel that gets pulled from both sides. Order Back to Back: No for a single pull on one face. Both configurations are offered in all five finishes.

Projection is 2 inches, with a 1-1/8 inch base dimension at the posts. In a tight galley or where the appliance sits beside a perpendicular wall or an adjacent door swing, measure that 2 inches of clearance before committing, since a 15 inch pull at full projection is a real knuckle catcher in a narrow aisle.

Five: Matte Black (MB), Polished Nickel (PN), Satin Brass (SB), and two two-tone combinations, Matte Black with Polished Nickel (MB/PN) and Matte Black with Satin Brass (MB/SB). The two-tones are the reason people spec Fonce, and they let you tie an appliance pull to mixed-metal cabinet hardware without matching everything to one finish.

Solid brass. For a 15 inch appliance pull that gets yanked on with a full refrigerator door behind it, the brass body is what keeps it from flexing or snapping at the post, and it is why the two-tone plating holds up in a kitchen.

The Fonce 422 is a contemporary two-tone-capable design. If you want a straight bar profile instead, the Emtek Bar Cabinet Pull in the Schaub Collection is the bar-style option from the same design family, and Deltana's SBP35 is a heavy-duty solid brass square bar pull, though at 3-1/2 inches it is drawer-scale rather than appliance-scale. For a steel T-pull bar, Orca Hardware's CK-12001 has a 2 inch bar width.

Yes. The Fonce 422 is a Schaub collection contemporary appliance pull in solid brass. Emtek also sells the Schaub Collection under its own numbers, including the Emtek 8405 Select cabinet pull, the Emtek Bar cabinet pull, the Emtek Alexander cabinet pull, and the Emtek Art Deco cabinet pull, all catalogued as cabinet knob/pull products. Those give you the same design house in door and drawer sizes, while the 422 stays the appliance-panel piece.

They are different animals. The Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel, while the Schaub 422 Fonce is solid brass and offered in Matte Black, Polished Nickel, Satin Brass, and two-tone Matte Black/Polished Nickel and Matte Black/Satin Brass. If you are matching brass finishes across a kitchen, the steel satin nickel bar will not tie in; if the run is already satin nickel steel, it will.

The 422 Fonce carries a 2 inch projection and a 1-1/8 inch base dimension, so pair it with slim modern pulls of similar depth. The Omnia 1970 is a forged solid brass modern cabinet pull with 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 are forged solid brass modern pulls with 1-3/16 inch projection. For traditional drawer pulls instead, Trimco offers the 553 Series at 3 inch center to center and the 562 Series in 3-1/2 inch, 4 inch, and 96mm center to center.

No. The Schaub 422 Fonce is a two-post appliance pull on 12 inch center to center spacing with 1/4 x 20 x 1 screws, so the panel is bored for two holes at 12 inches apart. Knobs such as the Orca Bachelor Collection CK-15030 round knob at 1-1/4 inch diameter, the CK-16030 round ring knob at 1-1/4 inch diameter, or the Blackcomb CK-17025 square knob at 25mm are single-post parts and will leave the second bore exposed. Use them on doors and drawers that are drilled for one hole.

Fonce is a Schaub collection, so the matching knobs and shorter pulls carry the same profile and finishes. If you need a wider range of coordinating shapes in the same finish family, the Schaub Collection sold under Emtek covers additional designs including the Emtek 8405 Select cabinet pulls, Alexander, Art Deco and Bar series.