Schaub 779 12" Center to Center Mountain Appliance Pull

Yes. The Schaub 779 Mountain appliance pull is drilled on 12 inch center to center, so it drops onto an existing panel or door bored at 12 inches. Overall length is 13 inches, so allow a half inch of clear panel past each mounting hole.

An appliance pull is for panel-front refrigerators, freezers, and dishwashers where the grip has to be long enough to leverage a heavy door. The Schaub 779 at 12 inch centers is that part. For drawers and door fronts in the same kitchen you want shorter cabinet pulls, for example the Omnia 1968/102 at 4 inch centers or a Trimco 562 Series drawer pull in 3-1/2 inch, 4 inch, or 96mm centers. Mixing a long appliance pull on cabinet doors leaves you with hardware that overhangs the stile.

The Schaub 779 is a rustic-style Mountain collection appliance pull in solid bronze with a 12 inch center-to-center spacing. For a modern look on the same cabinet or appliance front, Omnia's 1968, 1969, 1970 and 1971 cabinet pulls are all modern-style pulls in forged solid brass, and Deltana's SBP35 is a modern square bar pull in solid brass. Those are different materials and much shorter mounting spreads, so plan on drilling new holes rather than reusing the 12 inch layout.

No. The Schaub 779 is an appliance pull at 12 inch center-to-center with a 13 inch overall length, sized for refrigerator and freezer panels. The Trimco 553 is a drawer pull at 3 inch center-to-center and the Trimco 562 is offered in 3-1/2 inch, 4 inch and 96mm center-to-center. Those are cabinet and drawer spreads, not appliance spreads, so they will not cover or reuse the 779 hole pattern.

Projection is 1-5/8 inches off the face of the panel, with a 1-1/8 inch base footprint at each post. That is enough knuckle room for a gloved hand on a heavy fridge or freezer panel, and it is the number to check against any adjacent cabinet or wall return so the pull does not collide when the door swings.

Seven: Antique Silver (AS), Antique Bronze (AZ), Dark Pewter (DP), Italian Nickel (IN), Natural (N), Natural Bronze (NB), and Verde Imperiale (VI). Because it is solid bronze, the living finishes such as Natural and Natural Bronze will continue to darken with handling, so if you are matching several kitchens across a property, order all the pulls in one go and pick one of the fixed finishes if you want them to stay identical.

The 779 is part of Schaub's Mountain collection in a rustic style. Emtek carries Schaub collection cabinet hardware under its SELECT program, including the 8405 Select cabinet pulls and the Alexander, Art Deco and Bar cabinet pull series, all catalogued as cabinet knob/pull items. Those are the Schaub-collection pieces to look at when you want the smaller doors and drawers to read as one family with a Schaub appliance pull.

The Schaub 779 has a 1-5/8 inch projection with a 1-1/8 inch base dimension. Where a walkway or adjacent door limits clearance, the Omnia 1969 and 1971 cabinet pulls are listed at a 1-3/16 inch projection and the Omnia 1970 at 1-1/4 inch, all forged solid brass. Those are cabinet-scale pulls, so confirm the mounting spread suits the panel before switching.

Yes, the 779 carries a California Proposition 65 warning, which is typical for solid bronze hardware. If you are shipping into California on a commercial or multi-family job, Schaub publishes the product stewardship notice covering it.

They are different products. The Orca CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel. The Schaub 779 is a solid bronze rustic appliance pull at 12 inch center-to-center, offered in Antique Silver, Antique Bronze, Dark Pewter, Italian Nickel, Natural, Natural Bronze and Verde Imperiale. If the finish schedule calls for bronze finishes, the Orca steel pull will not match them.