Schaub 780 18" Center to Center Mountain Appliance Pull

Emtek carries the Schaub Collection under its SELECT cabinet hardware program, so the Emtek 8405 Select cabinet pull is the nearest same-family option. The Schaub 780 is a Mountain collection rustic appliance pull in solid bronze with 18 inch center-to-center spacing and a 19-3/8 inch overall length, so if you need that long appliance-door span you should confirm the Emtek SELECT pull is offered in an appliance length before swapping. For shorter cabinet and drawer fronts in the same design language, the Emtek SELECT line is the direct counterpart.

No. The Schaub 780 is an appliance pull with 18 inch center-to-center spacing and a 19-3/8 inch overall length, sized to span a full refrigerator or freezer panel. The Omnia 1968/102 is a 4 inch center-to-center cabinet pull and the Trimco 553 series drawer pulls are 3 inch center-to-center, both drawer and door scale. Those bore spacings will not land on appliance panel prep drilled for 18 inch centers, and visually a 3 to 4 inch pull on a tall appliance door looks undersized.

Projection is 1-3/4 inches, measured from the door face to the back of the grip. That is enough hand clearance for a gloved grip on a heavy refrigerator panel, but it also means the pull sits proud in a tight galley or beside an adjacent appliance door, so measure your swing clearance if the run is narrow.

Solid bronze is the base material, not a plated zinc casting. On a pull this long carrying the weight of a refrigerator panel door it matters, because bronze bar holds its shape under repeated hard pulls. The living finishes in the range, Natural and Natural Bronze, will patina with handling, while Antique Bronze, Antique Silver, Dark Pewter, Italian Nickel, and Verde Imperiale are applied finishes.

Seven: Antique Silver (AS), Antique Bronze (AZ), Dark Pewter (DP), Italian Nickel (IN), Natural (N), Natural Bronze (NB), and Verde Imperiale (VI). If you are matching cabinet knobs and pulls already installed elsewhere in the kitchen, order the same Mountain collection finish code rather than matching by eye, since bronze finishes shift between collections.

Nothing about the 780 restricts orientation. It mounts through two holes on 18 inch centers, so it works horizontally across a wide appliance drawer or a bank of file drawers just as well as vertically on a refrigerator panel. Same 1-3/4 inch projection either way, which is worth checking on a drawer in a walkway.

The Orca Hardware CK-12001 T-pull bar is a steel pull with a 2 inch bar width in satin nickel, a different material and a different visual weight from the Schaub 780, which is solid bronze with a 1-3/4 inch projection and a 1-1/2 inch base dimension in a rustic Mountain profile. The Orca bar reads as a plain machined bar rather than a forged rustic shape, and satin nickel will not blend with the bronze-family finishes the 780 offers. Choose by whether the kitchen is running a warm bronze palette or a cool nickel one.