Schaub 5008 8" Center to Center Pub House Knurled Cabinet Pull

It mounts with #8-32 machine screws, 1 inch long, which is the standard cabinet pull thread. A 1 inch screw covers a typical 3/4 inch door or drawer face with thread to spare. If you are mounting through a thicker slab, a false front, or a door with an applied panel, pick up longer #8-32 screws in the same thread pitch.

The Schaub 5008 Pub House pull is a knurled contemporary cabinet pull in solid brass with an 8 inch center to center spacing and 1-1/4 inch projection. For a smooth, unknurled bar in the same material family, the Omnia 1970 is a modern cabinet pull in forged solid brass that also carries a 1-1/4 inch projection, so the standoff from the door face matches. The Omnia 1969 and 1971 are the same forged solid brass modern pull idea at a 1-3/16 inch projection, a sixteenth closer to the face. The visual difference is texture and shape: the 5008 reads as a knurled grip, the Omnia 1969, 1970 and 1971 read as plain modern bars.

The Schaub 5008 Pub House pull is fixed at 8 inch center to center with an 8-1/2 inch overall length, which suits wide drawers and appliance fronts rather than narrow ones. For shorter boring, the Omnia 1968/102 is a modern forged solid brass cabinet pull at 4 inch center to center. The Trimco 562 series drawer pull is offered in 3-1/2 inch, 4 inch and 96mm center to center, and the Trimco 553 series drawer pull is 3 inch center to center. The Deltana SBP35 is a modern square bar pull at 3-1/2 inches in solid brass. None of those carry the Pub House knurled texture, so if you are mixing them with 5008 pulls elsewhere in the same room, expect a different grip finish.

Two-hole pulls and single-hole knobs are not interchangeable. The Schaub 5008 Pub House pull mounts on two #8-32 x 1 inch screws at 8 inch centers. The Orca Hardware CK-15030 and CK-16030 Bachelor Collection items are round cabinet knobs at 1-1/4 inch diameter, and the Orca CK-17025 Blackcomb Collection item is a square cabinet knob at 25mm diameter; knobs take a single center bore and will leave one of your existing holes exposed. The Orca CK-12001 is a T-pull bar in steel with a 2 inch bar width, a different profile and base material from the solid brass 5008. The SDC SP50 is a 50mm spindle used in door controls, not cabinet hardware at all, despite the similar-sounding part description.

Projection is 1-1/4 inches, measured from the face of the door or drawer to the back of the grip bar. That is enough clearance for a gloved hand and it matters in a galley kitchen or a tight island run where a long 8-1/2 inch pull sticking out an inch and a quarter can catch a hip. The base sits 1/2 inch.

Five: Polished Chrome (PC), Brushed Nickel (BN), Matte Black (MB), Polished Nickel (PN), and Signature Satin Brass (SSB). If you are standardizing a whole kitchen or a multi-unit build, order all the openings in one finish code at once, since the knurled texture reads differently between the polished and the matte options under the same light.

Solid brass is the base material, including on the Matte Black and Polished Chrome versions, where the finish is applied over brass rather than over pot metal. For a rental turn or a hospitality job that gets cleaned hard, that matters: a plated zinc pull chips at the knurling, brass wears through to a metal that still looks like metal.

The Schaub 5008 Pub House pull is a solid brass contemporary cabinet pull at 8 inch center to center with a 1-1/4 inch projection and a 1/2 inch base dimension, mounted with #8-32 x 1 inch screws. If your specification calls out heavy-duty language, the Deltana SBP35 is described as a heavy-duty modern square bar pull in solid brass at 3-1/2 inches, and the Orca CK-12001 T-pull bar is steel rather than brass with a 2 inch bar width. Choosing among them is mostly a question of boring and profile: the 5008 covers the long 8 inch bore that the shorter Deltana and Orca bars will not.

The Schaub 5008 Pub House pull is offered in Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel and Signature Satin Brass, so a single 8 inch center to center pull covers both the matte black and brushed nickel schemes across a property. If you also need a shorter pull in the same job, the Omnia 1968/102 at 4 inch center to center and the Trimco 562 at 3-1/2 inch, 4 inch or 96mm centers give you shorter boring options, though they are separate series with their own profiles rather than a short version of the knurled Pub House bar.

Within the same Schaub Pub House collection, shorter center-to-center sizes carry the identical knurled grip and are the cleanest match. If you are willing to mix brands on the small fronts, the Deltana SBP35 is a heavy-duty solid brass bar pull at 3-1/2 inch center-to-center, and Trimco's 562 Series drawer pulls come in 3-1/2 inch, 4 inch, and 96mm spacings. Both are smooth bars, not knurled, so they read as a deliberate contrast rather than a match.

Not without changing the fastener. The 5008 ships with #8-32 x 1 inch screws sized for a standard 3/4 inch wood or MDF front. A glass door needs a through-bore with bushings and a screw length matched to the glass thickness, which is not what is supplied here. Plan on sourcing the correct-length #8-32 screws and glass hardware separately for those openings.