Schaub 5005 5" Center to Center Pub House Knurled Cabinet Pull

Yes, if your holes are 5 inches apart on center. The 5005 is a 5 inch center-to-center pull, so it drops onto existing 5 inch drilling with no new holes. Overall length is 5-1/2 inches, so it only extends about a quarter inch past each hole, which matters on narrow drawer faces and tight door stiles.

The Pub House 5005 uses #8-32 x 1 inch machine screws, which is the standard cabinet hardware thread. One inch of screw covers typical 3/4 inch drawer fronts and doors with thread to spare. If you are mounting through a thicker slab, a false front, or a drawer box front plus applied face, you will need longer #8-32 screws, and any #8-32 machine screw will thread into the pull.

No. The 5005 is fixed at 5 inch centers, so it will not land on 3 or 4 inch holes without redrilling the face. For existing 3 inch drilling, the Trimco 553 Series drawer pull is a 3 inch center-to-center option; the Trimco 562 Series covers 3-1/2 inch, 4 inch, and 96mm centers. The Omnia 1968/102 is a forged brass modern pull at 4 inch centers.

The Omnia 1970 Modern Cabinet Pull is a forged solid brass pull with a 1-1/4 inch projection, matching the Schaub 5005's solid brass base material and 1-1/4 inch projection. The visual difference is the treatment: the Schaub 5005 belongs to the Pub House collection and carries a knurled grip, while the Omnia 1970 is a smooth modern bar profile. If the knurled texture is what the designer specified, stay with the 5005; if the spec only calls for a solid brass contemporary pull at that projection, the Omnia 1970 sits at the same depth off the door face.

No. The Schaub 5005 is a 5 inch center-to-center pull with a 5-1/2 inch overall length, so 4 inch bores will not line up and you would be filling and redrilling. The Omnia 1968/102 is a forged solid brass modern cabinet pull with 4 inch center-to-center spacing and drops onto existing 4 inch holes. The Trimco 562 series is another route, offered in 3-1/2 inch, 4 inch, and 96mm center-to-center. Confirm your existing bore spacing before ordering either, since 96mm and 4 inch are close but not the same.

No, they are not the same part. The Emtek 8405 is part of the Emtek SELECT series within Emtek's Schaub collection and is catalogued as a cabinet knob/pull, while the Schaub 5005 is the Pub House knurled cabinet pull at a fixed 5 inch center-to-center. The shared Schaub name causes a lot of ordering mistakes. Emtek's Alexander, Art Deco, and Bar cabinet pulls sit in the same Schaub collection and are likewise separate series. If the drawing calls out 5005 Pub House, order the Schaub part number and do not substitute an Emtek series on the strength of the collection name.

Projection is 1-1/4 inches off the face of the door or drawer, measured to the outside of the bar, with 1/2 inch posts at the base. That gives a comfortable full-hand grip rather than a fingertip pull. Worth checking if the cabinet sits next to a wall return, an appliance panel, or a door that swings across it.

Five finishes: Polished Chrome, Brushed Nickel, Polished Nickel, Matte Black, and Signature Satin Brass. All five are part of the Pub House collection, so knobs and other sizes in that collection carry the same finish codes and will match across a kitchen or a multi-unit package.

Solid brass base material, not zinc or pot metal. That matters in rental turns and hospitality work where pulls get yanked daily; brass bar stock holds thread in the #8-32 posts better than cast zinc and the knurled texture stays crisp instead of wearing flat.

If you want a plain bar rather than a knurled one, the Omnia 1970 is a forged solid brass modern pull with the same 1-1/4 inch projection. The Omnia 1969 and 1971 are similar forged brass pulls at 1-3/16 inch projection, and the Deltana SBP35 is a heavy-duty solid brass square bar pull. Emtek also sells the Schaub collection under its SELECT line if you are standardizing on Emtek across the job.

The Schaub 5005 stands 1-1/4 inch off the door face. The Omnia 1969 and Omnia 1971 are both forged solid brass modern pulls with a 1-3/16 inch projection, so either pulls back slightly from the 5005 while keeping solid brass construction. In a narrow walkway where hip and pocket clearance matters, that reduction is worth taking, though be aware you are trading away the Pub House knurled texture for a modern profile.

For drawer fronts that cannot carry a 5-1/2 inch overall pull, look at the Trimco 553 series drawer pull at 3 inch center-to-center, or the Deltana SBP35 modern square bar pull at 3-1/2 inch in solid brass. The Deltana keeps the solid brass construction the Schaub 5005 uses; the Trimco 553 is the shorter of the two. Many jobs run the Schaub 5005 on tall doors and a shorter pull on the drawer bank, so mixing lengths in one kitchen is normal practice.

Both are defensible. The Schaub 5005 is solid brass with a knurled Pub House grip, which gives a textured hold that stays secure with wet hands. The Orca Hardware CK-12001 T-pull bar is steel with a 2 inch bar width in satin nickel, a different material route for the same cabinet function. Brass finishes like the 5005's Matte Black, Polished Chrome, Brushed Nickel, Polished Nickel, and Signature Satin Brass give you a wider palette to match existing door hardware across a property; steel is the choice when you are standardizing on a single utilitarian pull.

Yes. Schaub publishes a Proposition 65 warning for this pull, which is routine for solid brass hardware sold into California. Specifiers working on California projects should reference Schaub's product stewardship notice when the submittal calls for it.

Yes, and it is a common way to cut cost and simplify drilling, since a knob takes one hole rather than the two bores the Schaub 5005's 5 inch center-to-center layout requires. The Orca Hardware Bachelor Collection round cabinet knob is 1-1/4 inch diameter, the Bachelor round ring knob is also 1-1/4 inch diameter, and the Blackcomb square knob is 25mm diameter. A knob will not give you the knurled grip length of the 5005, so on heavy or full-height doors many specifiers keep the pull.