Schaub 5003 3-1/2" Center to Center Pub House Knurled Cabinet Pull

Yes. The 5003 Pub House knurled pull is drilled on 3-1/2 inch center-to-center spacing, so it lands on the same two holes as any other 3-1/2 inch ctc pull. Overall length is 4 inches, meaning it only overhangs a quarter inch past the hole centers, so old screw holes stay covered but there isn't much extra footprint to hide a larger previous mounting pattern.

The 5003 uses #8-32 x 1 inch machine screws, the standard cabinet hardware thread. One inch of screw handles a typical 3/4 inch drawer front with room for the post. If you're mounting through a thicker slab front or a front plus a drawer box face, you'll need longer #8-32 screws.

Two direct options at the same 3-1/2 inch spacing. The Deltana SBP35 is a modern square bar pull in solid brass, a squared-off profile rather than the Schaub's knurled round bar. The Trimco 562 Series drawer pull is offered in 3-1/2 inch, 4 inch, and 96mm ctc, so it's the one to use if you need several spacings to match across a mixed set of existing cabinet drillings. If you want something in the Schaub design language from a different line, Emtek's Bar Cabinet Pull is part of their Schaub Collection.

No. The 5003 is fixed at 3-1/2 inch center-to-center and its 4 inch overall length leaves no room to spread the posts. For an existing 4 inch drilling, look at the Omnia 1968/102, a forged solid brass modern pull at 4 inch ctc, or the Trimco 562 Series, which is offered in a 4 inch ctc option. Either avoids plugging and redrilling the fronts.

The Schaub 5003 Pub House knurled pull is fixed at 3-1/2 inch center-to-center, so it will not drop onto a 3 inch drilling without new holes. The Trimco 553 Series drawer pull is built on 3 inch center-to-center and suits that existing prep directly. If you are drilling new fronts anyway, the 5003 stays available on its 3-1/2 inch spacing.

Five finishes: Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, and Signature Satin Brass. All five are on the same solid brass body, so plating tone is the only difference between them. If you are standardizing a kitchen or a multi-family package, order the whole run in one finish code at once, since brass plating tones vary by production batch.

Solid brass base material, not zinc die cast. For hospitality, multi-family, and high-traffic residential that matters because brass takes the plating better and the knurled bar won't pit or flake at the grip the way a cast alloy can.

The Omnia 1968/102 Modern Cabinet Pull is forged solid brass on 4 inch center-to-center spacing, which covers wider drawer fronts than the 3-1/2 inch center-to-center Schaub 5003 Pub House pull. The Trimco 562 Series also lists a 4 inch center-to-center option. Both keep you in a pull rather than a knob, so the visual line across a run of drawers stays consistent.

Projection decides knuckle clearance in a tight galley or against an adjacent appliance. The Schaub 5003 Pub House pull stands 1-1/4 inch off the face, and the Omnia 1970 Modern Cabinet Pull is forged solid brass at the same 1-1/4 inch projection. If you want slightly less standoff, the Omnia 1969 and Omnia 1971 are both forged solid brass at 1-3/16 inch projection.

They are not the same part. The Schaub 5003 is the Pub House collection knurled pull, solid brass, 3-1/2 inch center-to-center with a 4 inch overall length. The Emtek Bar Cabinet Pull is its own Bar series in Emtek's Schaub Collection, and Emtek also catalogs the Alexander and Art Deco series pulls plus the Emtek 8405 SELECT cabinet pull. If a drawing calls out Pub House knurled, the Emtek Bar series is a different profile and should not be swapped in on appearance alone.

Yes, and it is a common mix in multi-family and hospitality casework. The Schaub 5003 is a two-hole pull on 3-1/2 inch center-to-center drilling. A knob takes a single hole instead, so the door prep is different: the Orca Hardware Bachelor Collection round cabinet knob is 1-1/4 inch diameter, the Bachelor round ring knob is also 1-1/4 inch diameter, and the Blackcomb Collection square knob is 25mm. Plan the prep before you order, since a knob will not cover the two-hole drilling left by a pull.

The Schaub 5003 Pub House pull is solid brass with a knurled grip and a #8-32 x 1 inch mounting screw. For a heavier commercial spec, the Deltana SBP35 is described as a heavy-duty solid brass square bar pull on the same 3-1/2 inch center-to-center. If you want a steel rather than brass body, the Orca Hardware CK-12001 T-Pull Bar is steel with a 2 inch bar width in satin nickel, though it is a different profile and prep than the 5003.

The knurling is a cross-cut texture on the grip of the bar, so it gives positive purchase with wet or greasy hands. That's why it reads well in kitchens and bar cabinetry. Style is contemporary, and the bar sits on 1/2 inch base posts, which keeps the footplate small against the door face.

Yes, Schaub publishes a Proposition 65 warning for this product, as they do across their solid brass hardware. If you're supplying a California job and need the warning language on the submittal package, it comes from Schaub's product stewardship documentation.

The Schaub 5003 is a contemporary-style solid brass pull with a knurled Pub House bar. For a smooth contemporary bar on the same kind of casework, the Omnia 1969, 1970, and 1971 are all forged solid brass modern cabinet pulls, and the Deltana SBP35 is a modern square bar profile in solid brass. All stay in the same material family as the 5003, so finishes across a kitchen read consistently.