Schaub 5008 Pub House Knurled ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$79.00
$50.99
Schaub 5008 8" Center to Center Pub House Knurled Cabinet Pull

Schaub 5008 Pub House Knurled Cabinet Pull, 8" Center to Center, Solid Brass

(No reviews yet) Write a Review

Model: 5008-SSB
From the Pub House Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$79.00
$50.99
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 5008 Pub House Knurled Cabinet Pull, 8" Center to Center, Solid Brass

The Schaub 5008 Pub House Knurled Cabinet Pull brings contemporary style to kitchen and bath cabinetry with a solid brass construction and distinctive knurled texture. This cabinet pull is built to an 8" center to center spacing with an 8-1/2" overall length and a 1-1/4" projection, making it a direct fit for standard cabinet and drawer preparations. Part of the Pub House collection, this pull pairs a contemporary profile with durable solid brass hardware for lasting daily use.

Key Features

  • Center to Center: 8" center to center spacing for straightforward installation on standard cabinet and drawer layouts.
  • Overall Length: Measures 8-1/2" overall for a substantial, easy to grip pull.
  • Projection: Extends 1-1/4" from the mounting surface for comfortable hand clearance.
  • Base Dimensions: 1/2" base dimension at the mounting point for a clean, low profile footprint.
  • Solid Brass Construction: Solid brass base material delivers durable, long-lasting performance for frequent cabinet and drawer use.
  • Knurled Contemporary Design: Pub House collection styling with knurled detailing adds a textured, contemporary look to cabinetry.
  • Thread / Screw Size: #8-32 x 1 for compatible mounting to cabinet and drawer fronts.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Thread / Screw Size: #8-32 x 1"
  • Overall: 8-1/2"
  • Product Dimension: 1/2"
  • Product Projection: 1-1/4"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 8"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture
  • Residential Remodeling Projects
  • Commercial Millwork
  • Builder and Designer Specified Cabinetry

Why Schaub 5008?

Schaub 5008 cabinet hardware combines solid brass construction with precise 8" center to center spacing and a 1-1/4" projection for dependable everyday performance. The knurled Pub House design adds contemporary texture and visual interest while maintaining the durability expected from solid brass cabinet hardware.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Pub House
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size::
#8-32 x 1"
Overall:
8-1/2"
Product Function:
Cabinet Pull
Product Dimension:
1/2"
Product Projection:
1-1/4"
Product Style:
Contemporary
Product Material:
Solid Brass
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
8"
Department:
Door Hardware

Schaub 5008-SSB – Frequently Asked Questions

1) What screws come with the Schaub 5008 cabinet pull and will they work on a thicker drawer front?
It mounts with #8-32 machine screws, 1 inch long, which is the standard cabinet pull thread. A 1 inch screw covers a typical 3/4 inch door or drawer face with thread to spare. If you are mounting through a thicker slab, a false front, or a door with an applied panel, pick up longer #8-32 screws in the same thread pitch.
2) What is the closest alternative to the Schaub 5008 Pub House pull if I want the same solid brass construction in a plain bar profile instead of knurled?
The Schaub 5008 Pub House pull is a knurled contemporary cabinet pull in solid brass with an 8 inch center to center spacing and 1-1/4 inch projection. For a smooth, unknurled bar in the same material family, the Omnia 1970 is a modern cabinet pull in forged solid brass that also carries a 1-1/4 inch projection, so the standoff from the door face matches. The Omnia 1969 and 1971 are the same forged solid brass modern pull idea at a 1-3/16 inch projection, a sixteenth closer to the face. The visual difference is texture and shape: the 5008 reads as a knurled grip, the Omnia 1969, 1970 and 1971 read as plain modern bars.
3) The 8 inch center to center Schaub 5008 is too long for my drawer fronts. What shorter pulls work?
The Schaub 5008 Pub House pull is fixed at 8 inch center to center with an 8-1/2 inch overall length, which suits wide drawers and appliance fronts rather than narrow ones. For shorter boring, the Omnia 1968/102 is a modern forged solid brass cabinet pull at 4 inch center to center. The Trimco 562 series drawer pull is offered in 3-1/2 inch, 4 inch and 96mm center to center, and the Trimco 553 series drawer pull is 3 inch center to center. The Deltana SBP35 is a modern square bar pull at 3-1/2 inches in solid brass. None of those carry the Pub House knurled texture, so if you are mixing them with 5008 pulls elsewhere in the same room, expect a different grip finish.
4) Which items look like substitutes for the Schaub 5008 cabinet pull but will not actually work as one?
Two-hole pulls and single-hole knobs are not interchangeable. The Schaub 5008 Pub House pull mounts on two #8-32 x 1 inch screws at 8 inch centers. The Orca Hardware CK-15030 and CK-16030 Bachelor Collection items are round cabinet knobs at 1-1/4 inch diameter, and the Orca CK-17025 Blackcomb Collection item is a square cabinet knob at 25mm diameter; knobs take a single center bore and will leave one of your existing holes exposed. The Orca CK-12001 is a T-pull bar in steel with a 2 inch bar width, a different profile and base material from the solid brass 5008. The SDC SP50 is a 50mm spindle used in door controls, not cabinet hardware at all, despite the similar-sounding part description.
5) How far does the Schaub Pub House 5008 pull stand off the cabinet face?
Projection is 1-1/4 inches, measured from the face of the door or drawer to the back of the grip bar. That is enough clearance for a gloved hand and it matters in a galley kitchen or a tight island run where a long 8-1/2 inch pull sticking out an inch and a quarter can catch a hip. The base sits 1/2 inch.
6) What finishes does the Schaub 5008 Pub House knurled pull come in?
Five: Polished Chrome (PC), Brushed Nickel (BN), Matte Black (MB), Polished Nickel (PN), and Signature Satin Brass (SSB). If you are standardizing a whole kitchen or a multi-unit build, order all the openings in one finish code at once, since the knurled texture reads differently between the polished and the matte options under the same light.
7) Is the Schaub Pub House 5008 solid brass or plated zinc?
Solid brass is the base material, including on the Matte Black and Polished Chrome versions, where the finish is applied over brass rather than over pot metal. For a rental turn or a hospitality job that gets cleaned hard, that matters: a plated zinc pull chips at the knurling, brass wears through to a metal that still looks like metal.
8) For a high-traffic commercial casework job, is the Schaub 5008 the right pull or should I specify something heavier duty?
The Schaub 5008 Pub House pull is a solid brass contemporary cabinet pull at 8 inch center to center with a 1-1/4 inch projection and a 1/2 inch base dimension, mounted with #8-32 x 1 inch screws. If your specification calls out heavy-duty language, the Deltana SBP35 is described as a heavy-duty modern square bar pull in solid brass at 3-1/2 inches, and the Orca CK-12001 T-pull bar is steel rather than brass with a 2 inch bar width. Choosing among them is mostly a question of boring and profile: the 5008 covers the long 8 inch bore that the shorter Deltana and Orca bars will not.
9) I need to match matte black and brushed nickel across a whole unit. Does the Schaub 5008 or an alternative give me that range?
The Schaub 5008 Pub House pull is offered in Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel and Signature Satin Brass, so a single 8 inch center to center pull covers both the matte black and brushed nickel schemes across a property. If you also need a shorter pull in the same job, the Omnia 1968/102 at 4 inch center to center and the Trimco 562 at 3-1/2 inch, 4 inch or 96mm centers give you shorter boring options, though they are separate series with their own profiles rather than a short version of the knurled Pub House bar.
10) I need a much shorter pull to match this on small drawers. What pairs with it?
Within the same Schaub Pub House collection, shorter center-to-center sizes carry the identical knurled grip and are the cleanest match. If you are willing to mix brands on the small fronts, the Deltana SBP35 is a heavy-duty solid brass bar pull at 3-1/2 inch center-to-center, and Trimco's 562 Series drawer pulls come in 3-1/2 inch, 4 inch, and 96mm spacings. Both are smooth bars, not knurled, so they read as a deliberate contrast rather than a match.
11) Can the Schaub 5008 be used on a glass or thin acrylic cabinet door?
Not without changing the fastener. The 5008 ships with #8-32 x 1 inch screws sized for a standard 3/4 inch wood or MDF front. A glass door needs a through-bore with bushings and a screw length matched to the glass thickness, which is not what is supplied here. Plan on sourcing the correct-length #8-32 screws and glass hardware separately for those openings.
How fast can I get the Schaub 5008-SSB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 5008-SSB come with a warranty?
Absolutely. The Schaub 5008-SSB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 5008-SSB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 5008-SSB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!