Schaub 5108 Pub House Collecti...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$79.00
$46.00
Schaub 5108 8" Center to Center Pub House Cabinet Pull

Schaub 5108 Pub House Collection Solid Brass Cabinet Pull, 8" Center to Center

(No reviews yet) Write a Review

Model: 5108-BN
From the Pub House Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$79.00
$46.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 5108 Pub House Collection Solid Brass Cabinet Pull, 8" Center to Center

The Schaub 5108 Pub House Collection Solid Brass Cabinet Pull brings a contemporary look to kitchen and bath cabinetry with an 8" center to center mounting spacing and a 1-1/4" projection for comfortable, confident grip. Constructed from solid brass for lasting durability, this pull measures 8-1/2" overall with a 1/2" base dimension, and installs using #8-32 x 1 screws. Part of the Pub House collection, it pairs clean contemporary lines with substantial solid brass construction for a refined cabinet hardware upgrade.

Key Features

  • Center to Center Spacing: 8" center to center mounting for standard cabinet and drawer applications.
  • Projection: 1-1/4" projection provides comfortable clearance for everyday use.
  • Solid Brass Construction: Solid brass base material delivers durable, long-lasting performance in daily cabinet and drawer use.
  • Overall Length: 8-1/2" overall length suits a range of cabinet and drawer face sizes.
  • Base Dimension: 1/2" base dimension for a refined, low-profile mounting footprint.
  • Thread / Screw Size: #8-32 x 1 mounting thread specification.
  • Contemporary Pub House Style: Clean contemporary lines from the Pub House collection complement modern cabinetry designs.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Overall: 8-1/2"
  • Product Dimension: 1/2"
  • Product Projection: 1-1/4"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 8"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture
  • Commercial Millwork
  • Residential Remodels
  • Office Casework

Why Schaub 5108?

Schaub 5108 Pub House cabinet pulls are crafted from solid brass for substantial, long-wearing quality that holds up to everyday cabinet and drawer use. The contemporary Pub House styling and 8" center to center, 1-1/4" projection profile make it a versatile choice for kitchen, bath, or furniture hardware upgrades. Compliance with California Proposition 65 labeling requirements is noted for added transparency.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Pub House
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size::
#8-32 x 1
Overall:
8-1/2"
Product Function:
Cabinet Pull
Product Dimension:
1/2"
Product Projection:
1-1/4"
Product Style:
Contemporary
Product Material:
Solid Brass
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
8"
Department:
Door Hardware

Schaub 5108-BN – Frequently Asked Questions

1) What screws come with the Schaub 5108 cabinet pull and will they work on a thicker drawer front?
Mounting is #8-32 thread at 1 inch length, which is the standard machine screw for cabinet pulls and suits typical 3/4 inch doors and drawer fronts. On a thicker front, a false front, or a slab with an applied panel, 1 inch won't reach through, so order longer #8-32 screws to match your actual stock thickness.
2) What is a comparable solid brass cabinet pull to the Schaub 5108 Pub House pull if I need a shorter center-to-center?
The Schaub 5108 Pub House pull is a solid brass cabinet pull set up on 8 inch centers with an 8-1/2 inch overall length. For a shorter drilling, the Omnia 1968/102 modern cabinet pull is forged solid brass on 4 inch center-to-center spacing, and the Deltana SBP35 modern square bar pull is a heavy-duty solid brass pull at 3-1/2 inches. Both share the solid brass construction but require a different hole pattern, so they are not drop-ins on a door already bored for 8 inch centers.
3) What should I use instead of the Schaub 5108 on a drawer front too narrow for 8 inch centers?
The Schaub 5108 needs two holes at 8 inch centers with an 8-1/2 inch overall footprint, which rules out narrow drawer fronts. The Trimco 553 series drawer pull is drilled at 3 inch center-to-center, and the Trimco 562 series offers 3-1/2 inch, 4 inch, and 96mm center-to-center options. Either gives you a drawer pull on a much tighter hole pattern.
4) How much clearance does the Schaub 5108 pull need in a tight kitchen or galley run?
Projection is 1-1/4 inches off the face of the door, with a 1/2 inch base footprint. That gives roughly an inch of finger room behind the grip. In a galley or where a drawer bank sits next to an appliance or a wall return, check that 1-1/4 inches of stand-off won't foul an adjacent door swing or a handle on the perpendicular run.
5) Is the Schaub 5108 Pub House pull solid brass or plated zinc?
Solid brass is the base material, not zinc die cast or tube steel. For a property manager or a hospitality spec, that matters on turnover: solid brass takes the finish better and holds up to repeated cleaning at high-traffic pulls like a trash drawer or a pantry door.
6) What else could I use instead of the Schaub 5108 if I want a similar contemporary bar pull in solid brass?
The closest in material and look are the Omnia modern cabinet pulls: the Omnia 1970 is forged solid brass with the same 1-1/4 inch projection as the 5108, and the 1969 and 1971 are forged solid brass at 1-3/16 inch projection. The Deltana SBP35 is a heavy-duty solid brass square bar pull if you want a squared profile rather than the Pub House shape. For a steel bar pull instead of brass, the Orca Hardware CK-12001 T-Pull is a 2 inch bar width in satin nickel.
7) Is the Orca CK-12001 T-pull bar an alternative to the Schaub 5108?
They are different builds. The Schaub 5108 Pub House pull is solid brass and offered in Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, and Signature Satin Brass. The Orca Hardware CK-12001 is a steel T-pull bar in satin nickel with a 2 inch bar width. If the specification calls for solid brass or for a finish such as Signature Satin Brass or Matte Black, the 5108 is the one to order.
8) I need to standardize cabinet pulls across a multi-family or hospitality build. Does the Pub House 5108 come in other sizes?
The 5108 is the 8 inch center to center size in the Pub House line. For a full unit you'll typically pair it with shorter centers from the same collection on the smaller doors and drawers, so specify by collection first and then by ctc per opening size. Keep one finish code across the whole package, matte black or Signature Satin Brass for instance, so replacement stock stays interchangeable between units.
9) Does the Schaub 5108 pull carry a California Proposition 65 warning?
Yes, Schaub publishes a Proposition 65 warning for the 5108 through its product stewardship page. If you are shipping to a California jobsite or selling on to a California end user, that disclosure needs to travel with the product.
How fast can I get the Schaub 5108-BN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 5108-BN come with a warranty?
Absolutely. The Schaub 5108-BN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 5108-BN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 5108-BN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!