Schaub 5012 Pub House Knurled ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$120.00
$69.56
Schaub 5012 12" Center to Center Pub House Knurled Cabinet Pull

Schaub 5012 Pub House Knurled Cabinet Pull, 12" Center to Center, Solid Brass

(No reviews yet) Write a Review

Model: 5012-MB
From the Pub House Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$120.00
$69.56
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 5012 Pub House Knurled Cabinet Pull, 12" Center to Center

The Schaub 5012 Pub House Knurled Cabinet Pull brings a contemporary, knurled texture to cabinet doors and drawers with a 12" center to center spacing and a 12-1/2" overall length. Crafted from solid brass and finished in polished chrome, this cabinet pull offers a 1-1/4" projection for a comfortable, confident grip. As part of the Pub House collection, it is designed to coordinate with Contemporary style cabinetry, kitchens, and bath spaces that call for a clean, tactile finish.

Key Features

  • Center to Center Spacing: 12" center to center with a 12-1/2" overall length simplifies cabinet door and drawer installation and replacement.
  • Projection: 1-1/4" projection provides comfortable clearance for everyday opening and closing.
  • Base Dimension: 1/2" base dimension keeps the pull profile low and unobtrusive against the cabinet surface.
  • Solid Brass Construction: Solid brass base material delivers durable, long-term performance suited to daily cabinet hardware use.
  • Polished Chrome Finish: Polished chrome finish complements contemporary cabinetry and coordinating bath or kitchen fixtures.
  • Knurled Pub House Design: Knurled texture and Contemporary styling are signature elements of the Pub House collection, adding grip and visual interest.
  • Thread / Screw Size: #8-32 x 1 thread and screw size specification supports proper mounting to standard cabinet hardware preparations.
  • Cabinet Pull Function: Designed specifically as a cabinet pull for doors and drawers throughout kitchen, bath, and furniture projects.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Thread / Screw Size: #8-32 x 1"
  • Overall: 12-1/2"
  • Product Dimension: 1/2"
  • Product Projection: 1-1/4"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 12"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture
  • Residential Remodeling Projects
  • Commercial Millwork
  • Multi-Family Residential Properties
  • Boutique Hospitality Interiors

Why Schaub 5012?

The Schaub 5012 Pub House Knurled Cabinet Pull pairs solid brass construction with a polished chrome finish for dependable, long-wearing cabinet hardware. Its contemporary knurled design, precise 12" center to center spacing, and 1-1/4" projection make it a practical, consistent choice for cabinetry projects seeking matching style and fit across multiple pulls.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Pub House
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size::
#8-32 x 1"
Overall:
12-1/2"
Product Function:
Cabinet Pull
Product Dimension:
1/2"
Product Projection:
1-1/4"
Product Style:
Contemporary
Product Material:
Solid Brass
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
12"
Department:
Door Hardware

Schaub 5012-MB – Frequently Asked Questions

1) Will the Schaub 5012 Pub House pull fit my existing 12 inch center-to-center drilling?
Yes, the 5012 is drilled on 12 inch centers, so it drops onto an existing pair of holes bored 12 inches apart. Overall length is 12-1/2 inches, so it only overhangs about a quarter inch past each hole. On a drawer front or an appliance panel already bored for a 12 inch pull, no new holes are needed.
2) What screws come with the Schaub Pub House 5012 pull and will they reach through a thicker drawer front?
The 5012 uses #8-32 machine screws supplied at 1 inch long. That length suits a standard 3/4 inch drawer front or door with a little thread engagement to spare. If you are pulling through a thicker slab, a false front plus a drawer box face, or a panel with a backing plate, you will need longer #8-32 screws, which is the standard cabinet hardware thread.
3) Can I use the Schaub 5012 to replace an existing appliance panel pull?
Only if the panel is bored on 12 inch centers. Appliance manufacturers do not settle on one spacing, and the 5012 is a fixed 12 inch center pull, so measure hole to hole on the panel before ordering. If the existing spacing is different, you are either filling and re-drilling the panel or matching the spacing with another pull. Where the spacing does match, the #8-32 thread is the common cabinet hardware size, so the panel's existing tapped holes or through-bores usually take these screws.
4) What is the closest cross-brand equivalent to the Schaub 5012 Pub House knurled pull in solid brass?
The Schaub 5012 is a solid brass cabinet pull with 12 inch center-to-center spacing and a 1-1/4 inch projection. Among other brands carried, the Omnia 1970 Modern Cabinet Pull is forged solid brass with the same 1-1/4 inch projection, so it matches both the material and the standoff from the door face. The Omnia 1969 and Omnia 1971 are also forged solid brass but sit at 1-3/16 inch projection, a slightly tighter grip clearance. None of the Omnia pulls carry the Pub House knurled texture, so if the knurl is what the design calls for, the Schaub 5012 is the one that carries it.
5) The drawer only takes a short pull - what should I use instead of a 12 inch center-to-center pull?
The Schaub 5012 is drilled at 12 inch center-to-center with a 12-1/2 inch overall length, which needs a wide drawer front or a tall door to land correctly. For short drawers, the Omnia 1968/102 is a forged solid brass modern pull at 4 inch center-to-center. The Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inches. Trimco also builds short drawer pulls: the 553 Series at 3 inch center-to-center, and the 562 Series with 3-1/2 inch, 4 inch, and 96mm center-to-center options. All of those keep a bar-style pull on the front while dropping into a much narrower hole pattern.
6) How far does the Schaub 5012 cabinet pull stand off the door face?
Projection is 1-1/4 inches, measured from the face of the cabinet to the outside of the grip. That is enough hand clearance for a gloved grab on a tall pantry or refrigerator panel, and it is the number to check against anything that swings past the pull, an adjacent door in a corner run or a wall return. The bar itself is 1/2 inch, so the knurled grip is a half inch section standing a quarter inch clear of the face at its closest.
7) What finishes does the Schaub 5012 Pub House knurled pull come in?
Five finishes: Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, and Signature Satin Brass. All five are on solid brass, so the finish sits on a brass substrate rather than plated zinc. For a kitchen where the pulls have to read against existing faucets or appliance trim, Brushed Nickel and Polished Chrome are the two that pair with most stainless and chrome plumbing, while Signature Satin Brass and Matte Black are the accent choices.
8) What else could I use instead of the Schaub 5012 if I want a plainer bar pull in solid brass?
Two directions from what ZenSupply carries. The Omnia 1970 is a modern forged solid brass pull with the same 1-1/4 inch projection, so it stands off the face identically but without the knurled texture. The Omnia 1969 and 1971 are the same family at 1-3/16 inch projection. If you want to stay inside the Schaub design language, Emtek's SELECT cabinet pull line, model 8405, is offered under the Schaub Collection.
9) I need matching pulls for small drawers to go with a 12 inch Schaub Pub House pull. What are my options?
For the short fronts, the closest matches in the same collection family come from Emtek's Schaub Collection lines, the SELECT 8405 and the Bar cabinet pull, both catalogued as cabinet knob or pull. If you are only after a small drawer pull in a plain profile, the Trimco 553 Series runs 3 inch centers and the 562 Series comes in 3-1/2 inch, 4 inch, and 96mm centers. Deltana's SBP35 is a square bar pull at 3-1/2 inches in solid brass, and the Omnia 1968/102 is a forged brass modern pull at 4 inch centers.
10) Can I get the Schaub Pub House look from Emtek, or is Schaub the only source?
Emtek builds a Schaub Collection of cabinet knobs and pulls, and several series in it sit alongside the Schaub 5012: the Emtek 8405 Select cabinet pulls, the Alexander series, the Art Deco series, and the Bar series, all catalogued as cabinet knob or pull. Those are the Emtek-branded expressions of the Schaub line. The Pub House collection with the knurled texture, 12 inch center-to-center and 1-1/4 inch projection is the Schaub 5012 itself, so specify the 5012 when the knurled Pub House profile is what the elevation shows and treat the Emtek Schaub Collection series as adjacent design options rather than drop-in matches.
11) Is a steel bar pull an acceptable swap for a solid brass one on a cabinet run?
The Schaub 5012 is solid brass and offered in Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel and Signature Satin Brass. The Orca Hardware CK-12001 T-Pull Bar is a steel pull with a 2 inch bar width in satin nickel. Both function as cabinet pulls, but the base metal and the finish range differ: a brass substrate takes the living-finish and brass tones such as Signature Satin Brass, while the CK-12001 is supplied in satin nickel. If a project is standardizing on one base material across a cabinet package, that distinction is the one to check before mixing the two.
12) What looks like a substitute for a 12 inch cabinet pull but will not work as one?
Cabinet knobs are the common mis-order. The Orca Hardware Bachelor Collection round cabinet knob CK-15030 and round ring knob CK-16030 are both 1-1/4 inch diameter, and the Blackcomb CK-17025 is a 25mm square knob; all three are single-hole cabinet knobs, not two-hole pulls, so none of them land on the 12 inch center-to-center hole pattern the Schaub 5012 uses with #8-32 x 1 inch screws. Further afield, the SDC SP50 50MM Spindle is a door control component, not cabinet hardware at all. If the drawer front is already bored for a 12 inch spread, only a two-hole pull at that spacing will cover it.
13) What is a knurled cabinet pull and does the texture actually help?
Knurling is a cross-hatched pattern cut into the grip. On the Pub House 5012 it runs the length of the bar, and the practical effect is grip with wet or greasy hands, which is why it turns up on kitchen and bar cabinetry. The Pub House line is styled contemporary, so the texture is the detail doing the work rather than any applied ornament.
14) Do I order the Schaub 5012 by handing or is it symmetrical?
No handing. The 5012 is a symmetrical bar pull, so it mounts horizontally on a drawer or vertically on a door with no left or right version to specify. The only choice on the order is finish, five of them, and the 12 inch center is fixed on this model.
15) I need a plainer bar pull than the knurled Pub House - what are the smooth-profile options?
The Schaub 5012 carries the knurled Pub House texture in a contemporary style. For a plain bar face, the Emtek Bar Cabinet Pull in the Schaub Collection is the straight bar series, and the Deltana SBP35 is a modern square bar pull in heavy-duty solid brass at 3-1/2 inches. The Omnia 1970 is a modern forged solid brass pull sharing the 1-1/4 inch projection of the 5012. The trade-off is grip feel and appearance: the knurl on the 5012 gives a textured surface, while the bar and square-bar profiles present a smooth face.
How fast can I get the Schaub 5012-MB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 5012-MB come with a warranty?
Absolutely. The Schaub 5012-MB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 5012-MB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 5012-MB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!