Schaub 5006 6" Center to Center Pub House Knurled Cabinet Pull

Yes, if your existing holes are drilled 6 inches apart. The 5006 is a 6 inch center-to-center pull with a 6-1/2 inch overall length, so it covers a standard 6 inch hole pattern with only a quarter inch of extra bar past each screw. If your drawer fronts are bored on a different spacing, this one won't drop in without redrilling.

The 5006 takes #8-32 machine screws and ships with the 1 inch length, which is the size for a standard 3/4 inch drawer front or door. Thicker fronts, or a drawer box with an applied face, need longer #8-32 screws bought separately.

The Omnia 1970 is a forged solid brass modern cabinet pull with a 1-1/4 inch projection, matching the 1-1/4 inch projection of the Schaub 5006 Pub House pull. Both are solid brass. The 5006 carries the knurled Pub House styling and a 6 inch center-to-center spacing, while the Omnia 1970 is a plain modern bar profile, so the difference is grip texture and appearance rather than how far the pull stands off the drawer face. If the cabinet run was drawn around a 1-1/4 inch standoff for finger clearance, either pull holds that dimension.

For narrower drawer fronts, the Omnia 1968/102 is a forged solid brass modern cabinet pull with 4 inch center-to-center spacing, and the Trimco 562 series drawer pulls come in 3-1/2 inch, 4 inch, and 96mm center-to-center options. The Trimco 553 series is 3 inch center-to-center. The Schaub 5006 Pub House pull is 6 inch center-to-center with a 6-1/2 inch overall length, which needs a drawer front wide enough to carry that mounting span. Drill spacing is not adjustable on any of these, so pick the centers that suit the front before you bore.

Projection is 1-1/4 inches, measured from the face of the door or drawer to the back of the grip. That's enough clearance to get a gloved hand behind it, and it's the number to check against anything nearby, an adjacent appliance panel, a wall return, or a drawer in an inside corner run where two pulls could collide when both are opened.

The knurling is the whole point of the Pub House 5006, so if you want a smooth bar, look at a different line. The Omnia 1968/102 is a forged solid brass modern pull at 4 inch centers, and the Omnia 1970 is forged solid brass with the same 1-1/4 inch projection as the 5006, so it will stand off the face identically. The Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inches. All three are smooth rather than textured.

Five: Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, and Signature Satin Brass. If you're matching an existing kitchen, note that Polished Nickel and Polished Chrome read differently side by side, chrome is cooler and bluer, nickel warmer, so pull one of each before committing a whole run.

Not with the supplied hardware. The 5006 ships with #8-32 x 1 inch screws sized for a nominal 3/4 inch front. On a thin panel or a glass-front frame the screw will protrude through the back, so you need shorter #8-32 screws cut or bought to the panel thickness plus the pull post depth.

The Orca Hardware Bachelor Collection round cabinet knob CK-15030 is 1-1/4 inch diameter, the CK-16030 is a 1-1/4 inch diameter round ring knob, and the Blackcomb Collection CK-17025 is a 25mm square knob. All three are cabinet knobs, single-hole items, while the Schaub 5006 is a cabinet pull mounting on 6 inch centers. Mixing knobs on doors with pulls on drawers is common in a kitchen or millwork package; just note the knobs bore one hole and the 5006 bores two.

They are different builds. The Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width, made of steel in satin nickel. The Schaub 5006 Pub House pull is solid brass and offered in Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, and Signature Satin Brass. If the rest of the run is brass with a knurled face, the steel T-pull will read as a different part; if the job is a utility or back-of-house cabinet where a steel bar suits, the CK-12001 covers it.

The Deltana SBP35 is a modern square bar pull at 3-1/2 inch, heavy-duty solid brass, and it gives a square profile where the Schaub 5006 Pub House pull is a knurled contemporary bar on 6 inch centers. Both are solid brass. On a slab or shaker front where the design calls for a squared edge, the SBP35 changes the profile; note the SBP35 is a 3-1/2 inch part, so the mounting span differs from the 5006 and the holes will not line up on an existing bore.

The bar measures 1/2 inch. That's a substantial grip rather than a thin wire pull, and combined with the knurled texture it gives a positive hold on heavy drawers, which is worth having on a loaded pot drawer or a pantry pullout. If you want a slimmer profile, a bar-style pull is the lighter-looking alternative.

The 5006 covers the 6 inch center-to-center size in the Pub House collection. To carry the same knurled contemporary look across a full kitchen you'd pair it with other Pub House pieces in shorter centers and matching knobs, ordered in the same finish so the plating batch reads consistently. Schaub styling is also carried in the Emtek Schaub Collection lines, including the Emtek 8405 SELECT and the Emtek Bar cabinet pull, if you need to fill out sizes across a large job.

Emtek offers the Art Deco cabinet pull and the Alexander cabinet pull, both in the Schaub Collection, as alternatives with their own decorative profiles. The Schaub 5006 is the contemporary Pub House knurled bar. Where a period kitchen or a traditional millwork package would fight the knurled contemporary look, the Art Deco or Alexander profile carries the same collection lineage with a different face.