Schaub 535 15" Center to Center Menlo Park Appliance Pull

The Menlo Park 535 mounts on 1/4-20 threaded studs or screws, which is the heavier appliance-pull thread rather than the 8-32 used on ordinary cabinet pulls. Panel thickness on a refrigerator or freezer door varies a lot, so measure your panel and order 1/4-20 screws long enough to fully engage the post if the included hardware comes up short.

Back to Back is a mounting choice you specify at order time. Selecting No gets a single pull for one face of the panel. Selecting Yes sets it up as a pair mounted through the panel so a pull shows on both sides, which is what people use on a glass or pass-through door rather than a solid appliance panel. Both options are offered in all seven finishes.

The Schaub 535 Menlo Park appliance pull uses a zinc base material. If solid brass is a requirement, the Omnia 1968/102 modern cabinet pull is forged solid brass at 4 inch center to center, and the Deltana SBP35 modern square bar pull is heavy-duty solid brass at 3-1/2 inch. Both are cabinet-scale rather than appliance-scale, so they answer the material question but not the 15 inch center to center spread the 535 covers.

They are not interchangeable at appliance scale. The Schaub 535 is an appliance pull at 15 inch center to center with a 16-1/2 inch overall length and a 2 inch projection, sized for refrigerator and panel-front appliance doors. The Emtek Bar Cabinet Pull is part of Emtek's Schaub Collection and is catalogued as a cabinet knob/pull, so it suits drawer and door fronts rather than a 15 inch appliance mount. If you want the bar look carried onto the appliance, the 535 is the one sized for it.

Projection is 2 inches from the mounting surface to the back of the grip. In a tight galley or where the fridge sits next to a perpendicular wall or island, count that 2 inches plus your panel when checking door swing clearance. The base or footplate measures 1-1/4 inches.

Seven finishes: Satin Nickel, Brushed Nickel, Polished Nickel, Polished Chrome, Matte Black, Ancient Bronze, and Signature Satin Brass. Menlo Park is a transitional collection, so the same finish family is available across smaller Menlo Park cabinet pulls if you are standardizing a whole run of doors and drawers with the appliance panels.

The 535 is a Menlo Park transitional appliance pull, so the shorter pulls in the same visual family are the practical mates. Within the Emtek Schaub Collection, the Emtek 8405 Select cabinet pull and the Emtek Bar Cabinet Pull are both cabinet knob/pull items and carry the Schaub design language onto drawer fronts. If you prefer a separate line for the drawers, the Trimco 562 Series drawer pulls come in 3-1/2 inch, 4 inch and 96mm center to center, which are the usual drawer spacings.

The Schaub 535 Menlo Park appliance pull projects 2 inches from the face, which gives a full hand grip on a heavy appliance door. Where clearance in a walkway or against a return wall matters, the Omnia 1970 modern cabinet pull has a 1-1/4 inch projection and the Omnia 1969 and Omnia 1971 both have a 1-3/16 inch projection, all in forged solid brass. Those are cabinet pulls, so confirm the center to center spacing fits your bore before substituting.

Not on an appliance door. The Schaub 535 is a two-post appliance pull at 15 inch center to center with 1/4-20 screws, engineered for the weight and swing of a panel-front appliance. Single-post knobs such as the Orca Bachelor Collection CK-15030 round knob at 1-1/4 inch diameter, the CK-16030 round ring knob at 1-1/4 inch, or the Blackcomb CK-17025 square knob at 25mm are cabinet knobs and suit small doors and drawers instead.

Yes, Schaub publishes a Proposition 65 warning for this pull, linked from their product stewardship page. California buyers and anyone specifying for a California project should review it. The base material is zinc.