Schaub CS539 Concealed Surface Mounted 15" Center to Center Menlo Park Arched Appliance Pull

That is what it is built for. It is an appliance pull with 1/4-20 threaded posts, the size appliance panels and thicker slab fronts are drilled for. Confirm the hole pattern on your panel is 15 inches on center, since appliance manufacturers vary the spacing and this pull is a fixed 15 inch centers, not adjustable.

The Schaub CS539 Menlo Park arched appliance pull is built on a zinc base material. If the specification calls for solid brass, the Omnia 1968/102 modern cabinet pull is forged solid brass, as are the Omnia 1969, 1970 and 1971 modern cabinet pulls. The Omnia pulls are modern in styling where the CS539 is transitional, so the material change comes with a different look on the door face.

No. The Schaub CS539 is an appliance pull at 15 inch center to center with a 16-1/8 inch overall length. The Omnia 1968/102 is a cabinet pull with 4 inch center-to-center spacing, so its mounting holes will not land on an appliance panel drilled for the CS539. Use the Omnia 1968/102 for drawer and door fronts and keep an appliance-length pull for the appliance panel.

Seven: Satin Nickel, Brushed Nickel, Polished Nickel, Polished Chrome, Ancient Bronze, Matte Black, and Signature Satin Brass. If you are matching a kitchen that already has Menlo Park knobs and pulls on the cabinets, order the appliance pull in the same finish code from the same collection rather than eyeballing a nickel against a nickel from another line.

No. The CS539 is concealed surface mounted, so the fasteners come from behind the panel into the posts and the face stays clean. On a panel that is already drilled for exposed-screw hardware you will still be reusing the same two 15 inch centers, but the screw length has to suit your panel thickness.

The CS539 covers the appliance panel at 15 inch center to center; drawers need a much shorter pull. The Trimco 553 series drawer pulls are 3 inch center to center, and the Trimco 562 series offers 3-1/2 inch, 4 inch and 96mm center to center, which gives a range of hole spacings to match existing drawer prep. The Deltana SBP35 modern square bar pull is another short option at 3-1/2 inches in solid brass.

The Schaub CS539 is a transitional arched pull with a 3/4 inch projection and a 1-1/8 inch base. For a plainer straight bar, the Emtek Bar cabinet pull is a bar-series pull, the Orca Hardware CK-12001 is a T-pull bar in steel with a 2 inch bar width, and the Deltana SBP35 is a modern square bar pull in solid brass. All three read as straight-line hardware rather than an arch.

A 15 inch center to center pull with a 16-1/8 inch overall length overwhelms a small door, and a single-hole knob is the usual answer there. The Orca Hardware CK-15030 Bachelor Collection round cabinet knob and the CK-16030 round ring knob are both 1-1/4 inch diameter, and the CK-17025 Blackcomb Collection square knob is 25mm. Knobs take a single bore rather than the two-hole layout the CS539 requires.

No. The Schaub CS539 has a 3/4 inch projection. The Omnia 1970 modern cabinet pull carries a 1-1/4 inch projection and the Omnia 1969 and 1971 both carry a 1-3/16 inch projection, so each stands further off the face than the CS539. That matters where a pull sits near a wall return, an adjacent appliance, or a door swing path.

The CS539 covers the appliance panels; you still need cabinet-scale pulls and knobs in the matching finish for the doors and drawers. Emtek's SELECT line carries the Schaub collection, including the Alexander, Art Deco and Bar cabinet pulls, if you want the rest of the kitchen from the same house. Style-wise the CS539 is transitional, so it sits comfortably with plain bar and arched shapes rather than heavily ornamented ones.

The CS539 is the Menlo Park arched appliance pull in a transitional style. Emtek carries the Schaub Collection in several profiles: the Alexander cabinet pull, the Art Deco cabinet pull, and the Bar cabinet pull, all catalogued as cabinet knob/pull items. These give a different shape within the same design family, though they are cabinet pulls rather than appliance-length hardware.

They are different parts. The Orca CK-12001 is a steel T-pull bar with a 2 inch bar width, finished satin nickel; the Schaub CS539 is a zinc-base appliance pull with 15 inch center to center hole spacing and a 1/4-20 thread size. If the panel is already drilled for the CS539, the mounting will not transfer, and the CS539 is offered in satin nickel among its finishes if that is the finish driving the question.