Schaub 553 4" Center to Center Heathrow Cabinet Pull

The Omnia 1968/102 is the nearest hole-pattern match. It is a modern cabinet pull in forged solid brass with 4 inch center-to-center spacing, the same drilling as the Schaub 553 Heathrow, which is also a 4 inch center-to-center solid brass pull. Because the mounting centers agree, it drops onto existing 4 inch drilling without new holes. The styling differs - the 553 is a contemporary Heathrow-collection profile with a 1-1/4 inch projection and 5-3/4 inch overall length, so check the overall length against your drawer face before you swap.

No. The part numbers collide but the products do not. The Trimco 553 series is a drawer pull at 3 inch center-to-center. The Schaub 553 Heathrow is a 4 inch center-to-center pull, 5-3/4 inch overall, in solid brass. Ordering by the bare number 553 will get you the wrong drilling, so specify the brand and the 4 inch center-to-center when you quote the Schaub.

Projection is 1-1/4 inches from the face of the door or drawer to the outside of the grip. That is enough knuckle clearance for a gloved hand and is a common consideration where cabinets sit next to an appliance or in a corner run where a deep pull can clash with an adjacent door swing. The base sits at 3/4 inch.

Solid brass base material, not zinc die cast. For a property manager or hospitality buyer, that is the durability question: brass takes handling and cleaning chemicals better than a plated pot-metal pull, and the finish is applied over a solid substrate rather than a cast shell that can chip at the edges.

The 553 is the 4 inch center-to-center Heathrow pull only. For narrower drawers where 4 inch spacing is too wide, look at the Trimco 553 Series drawer pull at 3 inch center-to-center, or the Trimco 562 Series which is offered in 3-1/2 inch, 4 inch, and 96mm spacings so you can run one family across mixed drawer widths. For knobs on small doors, the Orca Bachelor Collection round knob is 1-1/4 inch diameter.

The Omnia 1970 is a modern cabinet pull in forged solid brass with a 1-1/4 inch projection, matching the 1-1/4 inch projection of the Schaub 553 Heathrow. Projection is what determines knuckle clearance in front of the drawer face, so if a job was detailed around 1-1/4 inch standoff the 1970 keeps that dimension. The Omnia 1969 and Omnia 1971 sit slightly closer to the face at 1-3/16 inch projection if you want a leaner look.

The Schaub 553 Heathrow is a single spacing - 4 inch center-to-center, 5-3/4 inch overall - offered in Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel and Signature Satin Brass. If you need one series to cover several drillings across a building, the Trimco 562 series drawer pulls come in 3-1/2 inch, 4 inch and 96mm center-to-center options, so a mix of existing cabinet drilling can be served from one series. Trimco also offers the 553 series drawer pull at 3 inch center-to-center for narrower faces.

Yes. Schaub publishes a Proposition 65 warning covering this product, linked from the manufacturer's product stewardship page. California buyers specifying for multi-family or institutional work should pull that notice for their submittal package.

Not really. At 5-3/4 inches overall with 4 inch spacing, the 553 is sized for cabinet doors and drawer fronts. Appliance panels normally want a much longer grip with wider spacing for two-hand leverage. Use the 553 for the cabinetry run and spec a dedicated appliance pull for the panels.

Yes. Emtek lists several cabinet pulls under a Schaub Collection heading, including the Emtek 8405 Select cabinet pull, the Emtek Alexander, the Emtek Art Deco, and the Emtek Bar cabinet pull. Those are sold as Emtek cabinet knob/pull items in their own series - Alexander, Art Deco and Bar - rather than as the Heathrow profile, so they are a design-family alternative rather than a like-for-like replacement for the Schaub 553 Heathrow, which is a contemporary Heathrow-collection pull in solid brass.

Doors on knobs and drawers on the 553 Heathrow pull is a common split. Orca Hardware offers the Bachelor Collection round cabinet pull knob at 1-1/4 inch diameter, a round ring cabinet pull knob at 1-1/4 inch diameter, and a Blackcomb Collection square cabinet knob at 25mm diameter. All three are single-hole knobs, so they do not use the 4 inch drilling the Schaub 553 requires - lay out the door boring separately from the drawer boring.

The Schaub 553 Heathrow ships with #8-32 x 1 inch machine screws, the standard cabinet hardware thread. The Omnia 1968/102, 1969, 1970 and 1971 are all forged solid brass modern cabinet pulls in the same cabinet-pull class, so they mount through the drawer face the same way. Screw length is the variable to confirm on any swap - thicker drawer fronts or an applied face can outrun a 1 inch screw and need a longer one.