Schaub 554 6" Center to Center Heathrow Cabinet Pull

It takes #8-32 x 1 inch machine screws, which is the standard cabinet pull thread. That length suits typical 3/4 inch drawer fronts and door stiles. If you are mounting to a thicker slab front, a false front, or through a drawer box and face, you'll need longer #8-32 screws.

The Schaub 554 Heathrow is fixed at 6 inch center-to-center with an 8 inch overall length, so it will not work where the mounting holes are already bored closer together. The Omnia 1968/102 is a forged solid brass modern cabinet pull with 4 inch center-to-center spacing, and the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inches. For drawer banks bored at 3 inches, the Trimco 553 Series drawer pull covers that spacing, and the Trimco 562 Series is offered in 3-1/2 inch, 4 inch, and 96mm center-to-center.

The Heathrow 554 stands 1-3/8 inch off the door or drawer face. If clearance to an adjacent appliance or a walkway matters, the Omnia 1969 and Omnia 1971 modern cabinet pulls are forged solid brass at 1-3/16 inch projection, and the Omnia 1970 is 1-1/4 inch. All three keep the same solid brass construction as the Heathrow.

Five finishes: Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, and Signature Satin Brass. Since Heathrow is a full collection, you can carry the same finish across knobs and other sizes in the line for a consistent run of cabinetry.

Solid brass base material. For multi-family or hospitality work where pulls get grabbed thousands of times, solid brass holds threads better than die-cast zinc and the plated finishes are laid over a stable substrate.

The Heathrow 554 is a contemporary-styled solid brass pull. For a plainer bar profile, the Deltana SBP Series modern square bar pull is solid brass as well, and Omnia's 1968, 1969, 1970 and 1971 series are forged solid brass modern pulls. If you want a steel commercial-look bar, Orca's CK-12001 T-pull is a different animal entirely.

Yes, that is a common layout: pulls on drawers and doors, knobs on smaller uppers. The Heathrow 554 is a contemporary-style cabinet pull, and for the knob positions the Orca Hardware Bachelor Collection offers a 1-1/4 inch diameter round cabinet knob and a round ring knob in the same diameter, while the Blackcomb Collection is a 25mm square knob. Match the finish across the two lines by eye, since finish names differ between manufacturers.

The Heathrow 554 is solid brass and is offered in Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, and Signature Satin Brass. If the specification calls for steel instead of brass, the Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width in steel with a satin nickel finish. Note it is a different profile and bar width, so it will read differently on the elevation than the Heathrow.

You can, and the crossover is closer than most. Emtek sells Schaub-collection cabinet hardware, including the Emtek 8405 SELECT pulls and the Alexander, Art Deco and Bar cabinet pulls. Match on finish name and confirm center-to-center drilling per piece, since those series carry their own spacings.

Yes. Schaub publishes a Proposition 65 warning for California residents on this pull, linked from the product stewardship page on the manufacturer's site.

No. The SDC SP50 is a 50mm spindle used in door control hardware, not a cabinet pull. The Schaub 554 Heathrow is a surface-mounted cabinet pull that fastens through the drawer or door face with #8-32 x 1 inch screws. For a like-for-like cabinet pull, look at the Omnia 1968/102 or the Deltana SBP35 instead.