Schaub 681 5" Center to Center Stradella Cabinet Pull

The Stradella 681 uses #8-32 x 1 inch machine screws, the standard cabinet hardware thread. That 1 inch length covers typical 3/4 inch drawer fronts with room for the pull post. If you are mounting through a thicker applied front or a doubled-up face, you will need longer #8-32 screws, which is the same thread so replacements are easy to source.

The 681 will not work on those holes; it is drilled for 5 inch centers only, and moving to it means new holes and plugged old ones. For 4 inch centers the Omnia 1968/102 is a forged solid brass pull at 4 inch center-to-center. For 3 inch centers the Trimco 553 Series drawer pull is a 3 inch center-to-center option, and the Trimco 562 Series covers 3-1/2 inch, 4 inch, and 96mm centers. None of those are rustic cast bronze, so the look will change.

Within the Schaub Collection sold under the Emtek label, the Emtek Alexander Cabinet Pull and the Emtek Art Deco Cabinet Pull are the nearest relatives, since both are Schaub Collection cabinet knob/pull designs. The Schaub 681 itself is a cast bronze pull in the Stradella collection with a rustic style, 5 inch center to center, 5-3/4 inch overall and 1-1/4 inch projection, so if the cast bronze texture is what you are matching, stay on the 681 and use the Emtek Schaub Collection pieces where you need a different silhouette on the same cabinetry.

The Schaub 681 Stradella is the 5 inch center to center pull. The Omnia 1968/102 is a 4 inch center to center modern pull, the Trimco 553 Series drawer pulls are 3 inch center to center, and the Trimco 562 Series comes in 3-1/2 inch, 4 inch and 96mm center to center. None of those three land on 5 inch holes, so drilling stays as-is only with the 681; the Omnia and Trimco options mean new bores or a backplate.

Projection is 1-1/4 inches, so the grip stands that far off the face. Worth checking where two cabinet doors meet at an inside corner, or where a drawer sits next to an appliance or a wall return, since a 1-1/4 inch projection plus the pull length is what causes knuckle strikes on tight runs.

Cast bronze, not plated zinc. Cast bronze has real weight in the hand and the finish is on solid material rather than a thin plating over a different base, which is why it holds up in kitchens and multi-family units where hardware gets pulled thousands of times.

Three: Antique Bronze (AZ), Natural Bronze (NB), and Polished White Bronze (PWB). All three are bronze finishes on a cast bronze body. Natural Bronze is the living finish that will darken with handling, Antique Bronze is the darker pre-aged look, and Polished White Bronze reads bright and closer to a nickel tone while still being bronze underneath.

The 681 is the 5 inch center-to-center Stradella. Stradella is a collection, so the same rustic cast bronze profile is made in other center-to-center sizes under different model numbers. If you are running one look across a kitchen, order the 681 for the wide drawers and match the smaller Stradella models by center-to-center for doors and narrow fronts, keeping the finish code (AZ, NB, or PWB) the same on every piece.

Yes. The Stradella 681 is a rustic-style cast bronze pull, which is a textured, hand-worked look rather than a clean cylindrical bar. If you actually want the modern look, the Omnia 1970 and Omnia 1971 are modern forged solid brass pulls, and the Orca Hardware CK-12001 is a steel T-pull bar in satin nickel. Those read contemporary; the Stradella does not.

No, not on the same holes. Knobs such as the Orca Hardware CK-15030 and CK-16030 Bachelor Collection round knobs at 1-1/4 inch diameter, and the CK-17025 Blackcomb Collection square knob at 25mm, are single-hole parts. The Schaub 681 is a two-hole pull at 5 inch center to center using #8-32 x 1 inch screws, so moving to any of those knobs leaves one of the two existing bores exposed and needs a fresh single bore on center.

No. The Emtek 8405 is a Select cabinet knob/pull in the Emtek SELECT series carrying the Schaub Collection name, so it shares the design house but not the part. The Schaub 681 is the Stradella pull at 5 inch center to center, 5-3/4 inch overall, 1-1/4 inch projection, cast bronze. Order by the 681 part number when the spec calls out Stradella.

Emtek sells Schaub collection cabinet hardware under its own catalog, including the Emtek 8405 Select cabinet pulls and the Emtek Alexander, Art Deco, and Bar cabinet pulls, all listed as Schaub collection pieces. Those give you Schaub design under the Emtek line. If what you want specifically is the rustic cast bronze Stradella profile, the 681 is that part and the Emtek pieces are different series, not a like-for-like swap.

The 681 is a cabinet pull, and at 5 inch centers with a 5-3/4 inch overall length it suits drawer fronts and full-height doors. On narrow door stiles the 5-3/4 inch body can crowd the rail, so measure the flat area on the stile before committing to one size everywhere. If you prefer a knob on doors and a pull on drawers, the Orca Hardware Bachelor Collection round knob at 1-1/4 inch diameter is a knob option, though it is a different brand and finish family.

For narrower drawer fronts, the Trimco 553 Series drawer pulls run 3 inch center to center and the Trimco 562 Series offers 3-1/2 inch, 4 inch and 96mm center to center, which gives you a step-down range under the 681's 5 inch center to center and 5-3/4 inch overall length. Confirm the finish match, since the Schaub 681 is cast bronze in Antique Bronze, Natural Bronze and Polished White Bronze.