Schaub 681 Stradella Cabinet P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$148.00
$85.83
Schaub 681 5" Center to Center Stradella Cabinet Pull

Schaub 681 Stradella Cabinet Pull, 5" Center to Center, Cast Bronze

(No reviews yet) Write a Review

Model: 681-AZ
From the Stradella Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$148.00
$85.83
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 681 Stradella Cabinet Pull, 5" Center to Center, Cast Bronze

The Schaub 681 Stradella Cabinet Pull brings rustic style to kitchen and bathroom cabinetry with a 5" center to center mounting span, 5-3/4" overall length and 1-1/4" projection. Crafted from cast bronze, this pull is part of the Stradella collection and is designed to install using a #8-32 x 1 screw size for a secure, long lasting fit. This pull pairs with other pieces in the Stradella collection for coordinated cabinet hardware throughout a kitchen or bath.

Key Features

  • Center to Center Spacing: 5" center to center for straightforward retrofit onto standard cabinet drilling patterns.
  • Overall Length: 5-3/4" overall length provides a substantial, easy to grip pull surface.
  • Projection: 1-1/4" projection offers comfortable finger clearance from the cabinet face.
  • Cast Bronze Construction: Cast bronze base material delivers durable, long lasting performance suited to daily cabinet use.
  • Rustic Style: Rustic design details complement the Stradella collection for a warm, traditional look.
  • Thread / Screw Size: #8-32 x 1 mounting screw size for standard cabinet door and drawer installations.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Thread / Screw Size: #8-32 x 1"
  • Overall: 5-3/4"
  • Product Projection: 1-1/4"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 5"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture Projects
  • Residential Remodels
  • Dresser and Drawer Fronts
  • Pantry and Storage Cabinets

Why Schaub 681?

Schaub 681 Stradella pulls combine cast bronze construction with rustic styling for dependable, attractive cabinet hardware. The 5" center to center spacing and 1-1/4" projection make it a practical fit for kitchen and bath cabinetry, while the Stradella collection detailing adds a warm, traditional character to any room. Backed by consistent cast bronze quality, this pull is built to perform in everyday kitchen and bathroom use.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Stradella
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size:
#8-32 x 1"
Overall:
5-3/4"
Product Function:
Cabinet Pull
Product Projection:
1-1/4"
Product Style:
Rustic
Product Material:
Cast Bronze
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
5"
Department:
Door Hardware

Schaub 681-AZ – Frequently Asked Questions

1) What screws come with the Schaub 681 pull, and will they work on thicker drawer fronts?
The Stradella 681 uses #8-32 x 1 inch machine screws, the standard cabinet hardware thread. That 1 inch length covers typical 3/4 inch drawer fronts with room for the pull post. If you are mounting through a thicker applied front or a doubled-up face, you will need longer #8-32 screws, which is the same thread so replacements are easy to source.
2) My existing drawer holes are 3 or 4 inches apart. What can I use instead of the Schaub 681?
The 681 will not work on those holes; it is drilled for 5 inch centers only, and moving to it means new holes and plugged old ones. For 4 inch centers the Omnia 1968/102 is a forged solid brass pull at 4 inch center-to-center. For 3 inch centers the Trimco 553 Series drawer pull is a 3 inch center-to-center option, and the Trimco 562 Series covers 3-1/2 inch, 4 inch, and 96mm centers. None of those are rustic cast bronze, so the look will change.
3) What is the closest cross-brand alternative to the Schaub 681 Stradella pull if I want the same rustic cast bronze look?
Within the Schaub Collection sold under the Emtek label, the Emtek Alexander Cabinet Pull and the Emtek Art Deco Cabinet Pull are the nearest relatives, since both are Schaub Collection cabinet knob/pull designs. The Schaub 681 itself is a cast bronze pull in the Stradella collection with a rustic style, 5 inch center to center, 5-3/4 inch overall and 1-1/4 inch projection, so if the cast bronze texture is what you are matching, stay on the 681 and use the Emtek Schaub Collection pieces where you need a different silhouette on the same cabinetry.
4) I have 5 inch center to center holes already drilled. Which cabinet pulls besides the Schaub 681 will land on them?
The Schaub 681 Stradella is the 5 inch center to center pull. The Omnia 1968/102 is a 4 inch center to center modern pull, the Trimco 553 Series drawer pulls are 3 inch center to center, and the Trimco 562 Series comes in 3-1/2 inch, 4 inch and 96mm center to center. None of those three land on 5 inch holes, so drilling stays as-is only with the 681; the Omnia and Trimco options mean new bores or a backplate.
5) How much clearance does the Schaub 681 Stradella pull need in front of the cabinet?
Projection is 1-1/4 inches, so the grip stands that far off the face. Worth checking where two cabinet doors meet at an inside corner, or where a drawer sits next to an appliance or a wall return, since a 1-1/4 inch projection plus the pull length is what causes knuckle strikes on tight runs.
6) Is the Schaub Stradella cabinet pull solid metal or plated pot metal?
Cast bronze, not plated zinc. Cast bronze has real weight in the hand and the finish is on solid material rather than a thin plating over a different base, which is why it holds up in kitchens and multi-family units where hardware gets pulled thousands of times.
7) What finishes does the Schaub 681 Stradella pull come in?
Three: Antique Bronze (AZ), Natural Bronze (NB), and Polished White Bronze (PWB). All three are bronze finishes on a cast bronze body. Natural Bronze is the living finish that will darken with handling, Antique Bronze is the darker pre-aged look, and Polished White Bronze reads bright and closer to a nickel tone while still being bronze underneath.
8) Can I order the Stradella pull in other sizes to match across drawers and doors?
The 681 is the 5 inch center-to-center Stradella. Stradella is a collection, so the same rustic cast bronze profile is made in other center-to-center sizes under different model numbers. If you are running one look across a kitchen, order the 681 for the wide drawers and match the smaller Stradella models by center-to-center for doors and narrow fronts, keeping the finish code (AZ, NB, or PWB) the same on every piece.
9) I want a rustic bronze pull, not a modern bar pull. Is the Schaub Stradella the right style?
Yes. The Stradella 681 is a rustic-style cast bronze pull, which is a textured, hand-worked look rather than a clean cylindrical bar. If you actually want the modern look, the Omnia 1970 and Omnia 1971 are modern forged solid brass pulls, and the Orca Hardware CK-12001 is a steel T-pull bar in satin nickel. Those read contemporary; the Stradella does not.
10) Can I substitute a cabinet knob for the Schaub 681 pull on the same doors?
No, not on the same holes. Knobs such as the Orca Hardware CK-15030 and CK-16030 Bachelor Collection round knobs at 1-1/4 inch diameter, and the CK-17025 Blackcomb Collection square knob at 25mm, are single-hole parts. The Schaub 681 is a two-hole pull at 5 inch center to center using #8-32 x 1 inch screws, so moving to any of those knobs leaves one of the two existing bores exposed and needs a fresh single bore on center.
11) The Emtek 8405 comes up when I search Schaub. Is it the same thing as the Schaub 681?
No. The Emtek 8405 is a Select cabinet knob/pull in the Emtek SELECT series carrying the Schaub Collection name, so it shares the design house but not the part. The Schaub 681 is the Stradella pull at 5 inch center to center, 5-3/4 inch overall, 1-1/4 inch projection, cast bronze. Order by the 681 part number when the spec calls out Stradella.
12) What is the closest alternative to a Schaub Stradella pull if I want the same collection from a different label?
Emtek sells Schaub collection cabinet hardware under its own catalog, including the Emtek 8405 Select cabinet pulls and the Emtek Alexander, Art Deco, and Bar cabinet pulls, all listed as Schaub collection pieces. Those give you Schaub design under the Emtek line. If what you want specifically is the rustic cast bronze Stradella profile, the 681 is that part and the Emtek pieces are different series, not a like-for-like swap.
13) Can a single pull work for both cabinet doors and drawers on a Schaub Stradella kitchen?
The 681 is a cabinet pull, and at 5 inch centers with a 5-3/4 inch overall length it suits drawer fronts and full-height doors. On narrow door stiles the 5-3/4 inch body can crowd the rail, so measure the flat area on the stile before committing to one size everywhere. If you prefer a knob on doors and a pull on drawers, the Orca Hardware Bachelor Collection round knob at 1-1/4 inch diameter is a knob option, though it is a different brand and finish family.
14) I need a drawer pull to go with the Schaub 681 on shorter drawers. What works?
For narrower drawer fronts, the Trimco 553 Series drawer pulls run 3 inch center to center and the Trimco 562 Series offers 3-1/2 inch, 4 inch and 96mm center to center, which gives you a step-down range under the 681's 5 inch center to center and 5-3/4 inch overall length. Confirm the finish match, since the Schaub 681 is cast bronze in Antique Bronze, Natural Bronze and Polished White Bronze.
How fast can I get the Schaub 681-AZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 681-AZ come with a warranty?
Absolutely. The Schaub 681-AZ is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 681-AZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 681-AZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!