Schaub 682 4" Center to Center...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$177.00
$116.78
Schaub 682 4" Center to Center Stradella Cabinet Pull

Schaub 682 4" Center to Center Stradella Edge Pull in Cast Bronze

(No reviews yet) Write a Review

Model: 682-AZ
From the Stradella Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$177.00
$116.78
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 682 4" Center to Center Stradella Edge Pull in Cast Bronze

The Schaub 682 is a 4" center to center Stradella edge pull crafted from cast bronze for durable, long lasting performance. This edge pull function design offers a 5" overall length and a 1-1/4" projection, making it a versatile choice for cabinet doors and drawers. Finished in a rustic style befitting the Stradella collection, this pull brings warmth and character to kitchen, bath, and custom cabinetry projects.

Key Features

  • Center to Center Spacing: 4" center to center mounting dimension for standard cabinet drawer and door installations.
  • Overall Length: 5" overall length suited for a range of cabinet door and drawer sizes.
  • Projection: 1-1/4" projection provides comfortable clearance for everyday use.
  • Cast Bronze Construction: Base material of cast bronze for a durable, substantial feel.
  • Edge Pull Function: Designed as an edge pull, offering a streamlined mounting profile along the cabinet edge.
  • Rustic Stradella Style: Part of the Stradella collection in a rustic design aesthetic.
  • Thread / Screw Size: #8-32 x 1 mounting screw specification for proper installation fit.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Thread / Screw Size: #8-32 x 1"
  • Overall: 5"
  • Product Projection: 1-1/4"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 4"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Residential Cabinetry Remodels
  • Custom Furniture Projects
  • Commercial Millwork Installations

Why Schaub Stradella?

Schaub Stradella cabinet hardware delivers rustic style with the durability of cast bronze construction. Each pull is crafted to provide dependable, long lasting performance for cabinetry projects where both design and function matter.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Stradella
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size:
#8-32 x 1"
Overall:
5"
Product Function:
Edge Pull
Product Projection:
1-1/4"
Product Style:
Rustic
Product Material:
Cast Bronze
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
4"
Department:
Door Hardware

Schaub 682-AZ – Frequently Asked Questions

1) Will the Schaub 682 Stradella pull fit my existing 4 inch center-to-center drilling?
Yes. The Schaub 682 Stradella pull is drilled on 4 inch centers, so it drops onto an existing pair of holes bored 4 inches apart with no new drilling. Overall length is 5 inches, which means it covers about half an inch of face on each side of the holes, useful if the old pull left marks or finish shadow.
2) What screws come with the Schaub 682 and will they work on a thick drawer front?
The 682 takes #8-32 machine screws and ships in the standard 1 inch length. That covers a typical 3/4 inch drawer front or door with room for the threads to seat. If you are mounting to a thicker slab, a 5-piece drawer front with an applied panel, or adding a backplate, you need longer #8-32 screws. The thread size is the standard cabinet hardware thread, so replacements are easy to source.
3) My drawers are drilled at 3 inch centers. Can I use the Schaub 682 Stradella?
No. The Schaub 682 Stradella is built on 4 inch center-to-center spacing, so it will not land on 3 inch bores without redrilling the drawer front. For an existing 3 inch pattern, the Trimco 553 series drawer pull is made at 3 inch center-to-center. The Trimco 562 series also lists a 3-1/2 inch option if you are re-boring anyway and want something between the two.
4) How much does the Stradella pull stick out from the cabinet face?
Projection is 1-1/4 inches. That is a deep grip, enough to get a full hand behind on a heavy drawer or a pantry door, but worth checking where doors sit close to a wall return, an adjacent appliance panel, or inside a narrow galley run where a hip catches a protruding pull.
5) What finishes does the Schaub 682 Stradella pull come in, and can I mix it across a kitchen?
Three finishes: Antique Bronze (AZ), Natural Bronze (NB), and Polished White Bronze (PWB). All three are on the same cast bronze body, so the casting texture and Stradella profile read identically from one finish to the next. If you are standardizing a whole kitchen or a run of units, order the full quantity in one go so the finish lot stays consistent, since living bronze finishes vary between batches.
6) Which alternative matches the 1-1/4 inch projection of the Schaub 682?
The Omnia 1970 is listed at the same 1-1/4 inch projection in forged solid brass, so it gives a comparable grip depth if clearance behind the pull is what you sized around. The Omnia 1969 and 1971 sit slightly shallower at 1-3/16 inches. Bear in mind projection matching does not mean hole matching, so confirm the center spacing on whichever you pick.
7) Is a cabinet knob an acceptable substitute for the Schaub 682 Stradella pull?
Not on the same bores. The Schaub 682 Stradella mounts on two #8-32 x 1 inch screws at 4 inch centers. Knob products such as the Orca Hardware CK-15030 and CK-16030 Bachelor Collection round knobs at 1-1/4 inch diameter, and the CK-17025 Blackcomb square knob at 25mm, are single-screw items and would leave one of the existing holes exposed. Use a knob only where the drawer front is new or where you intend to fill and redrill.
8) I want the same 1-1/4 inch projection as the Stradella but in a modern brass pull. What matches?
The Omnia 1970 is a modern cabinet pull in forged solid brass with a 1-1/4 inch projection, the same standoff from the face as the Schaub 682 Stradella. If you want the handle to sit slightly tighter to the door, the Omnia 1969 and 1971 are both forged solid brass at a 1-3/16 inch projection. Projection matters where drawers sit close to an adjacent appliance or wall return, so confirm your clearance before choosing among them.
9) Will a finish from another brand match the Schaub 682 Stradella bronze?
Plan on keeping a visible run within one brand. The Schaub 682 Stradella is cast bronze offered in Antique Bronze (AZ), Natural Bronze (NB), and Polished White Bronze (PWB). Peer pulls such as the Omnia 1968/102, 1969, 1970, and 1971 are forged solid brass, and the Orca CK-12001 T-pull is steel in satin nickel, so the base metal and plating differ and living-finish bronzes will not weather the same way as brass. If you need additional profiles on the same job, staying within the Stradella collection or the Emtek Schaub Collection keeps the finish family consistent.
10) Is a cast bronze pull durable enough for a rental or a commercial kitchenette?
The 682 is cast bronze, not plated zinc or stamped steel, so the color goes through the material rather than sitting on the surface. Chips and wear on a cast bronze pull expose more bronze instead of a bright substrate, which is why bronze holds up in high-turnover multi-family and hospitality millwork. Natural Bronze in particular will darken with handling over time, so expect the look to change rather than fail.
11) Can I get the Stradella look on knobs or other sizes for the rest of the cabinetry?
Schaub designs are also carried under the Emtek Schaub Collection, which includes the Emtek 8405 SELECT cabinet pulls and knobs plus the Alexander, Art Deco, and Bar series. If you need a knob or a different length to run alongside the 682 on upper doors and lower drawers, that collection is where to look for a family match.
12) Is there a Proposition 65 warning on this Schaub pull for California jobs?
Yes, Schaub publishes a Proposition 65 warning for the 682, referenced through their product stewardship page. If you are specifying into California residential or commercial work where Prop 65 disclosure is part of your submittal package, flag it at the point of order.
How fast can I get the Schaub 682-AZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 682-AZ come with a warranty?
Absolutely. The Schaub 682-AZ is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 682-AZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 682-AZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!