Schaub 211048 127mm Center to Center Borde Edge Pull

The Schaub 211048 Borde edge pull has a zinc and aluminum base material. If the specification calls for solid brass, the Omnia 1968/102, 1969, 1970 and 1971 modern cabinet pulls are all forged solid brass, and the Deltana SBP35 modern square bar pull is heavy-duty solid brass at 3-1/2 inches. Note that those are conventional cabinet pulls, so hole spacing and projection differ from the 211048 and the drilling will not carry over.

Among other brands, the Omnia 1968/102 modern cabinet pull is the nearest spacing neighbor, with 4 inch center-to-center rather than the 5 inch center-to-center the Schaub 211048 uses, so the mounting holes are not interchangeable. The Trimco 562 series drawer pull is offered in 3-1/2 inch, 4 inch and 96mm center-to-center, all shorter than 5 inches. If the existing holes are drilled at 5 inches, the Schaub 211048 is the one that drops onto them, and a 4 inch pull would require redrilling.

Projection is 1-1/2 inches, which is a deep grip for an edge pull. Worth checking in a tight galley or against an adjacent wall or appliance where a hand-deep pull can catch. Overall length is 7-7/8 inches with a 5/8 inch base dimension.

Five: Polished Chrome (PC), Gold Rande (GR), Matte Black (MB), Matte White (MW), and Nickel Silk (NS). Matte White is unusual in this category and is the one to look at if you are matching painted slab fronts rather than a metal appliance package.

An edge pull wraps the edge of a door or drawer front rather than sitting flat on the face, so the grip comes from behind the front. It suits flat contemporary slab fronts and handleless-look kitchens where you don't want hardware standing proud of the face. If you want a conventional face-mounted pull across the same run, a bar pull like the Orca CK-12001 T-pull bar or the Emtek Bar Cabinet Pull is the other approach.

It takes #6 x 5/8 screws. That length suits standard 3/4 inch fronts where the pull captures the edge. If you are going through a thicker front or adding a back panel, you'll need longer #6 machine screws.

Not a direct one. The Emtek Bar, Alexander, Art Deco and SELECT 8405 pulls are all in the Emtek Schaub Collection and share the Schaub design lineage, but they are catalogued as cabinet knob/pull products mounted on the face of a door or drawer. The Schaub 211048 is an edge pull with 1-1/2 inch projection, designed to be grasped at the edge of the panel. They can live in the same kitchen for visual continuity, but the Emtek pulls will not replace the 211048 in the role an edge pull fills.

The Schaub 211048 Borde edge pull projects 1-1/2 inches off the panel. For less stick-out, the Omnia 1970 modern cabinet pull projects 1-1/4 inches and the Omnia 1969 and 1971 both project 1-3/16 inches. If you want to eliminate projection almost entirely, the Orca Hardware Bachelor Collection round knob and round ring knob are 1-1/4 inch diameter knobs, and the Blackcomb Collection square knob is 25mm. All of those are face-mounted knobs and pulls rather than edge pulls, so the grip position on the door changes.

The Trimco 553 series drawer pull comes in 3 inch center-to-center and the Trimco 562 series in 3-1/2 inch, 4 inch and 96mm center-to-center, both aimed at drawer applications. The Orca Hardware CK-12001 T-pull bar is a steel pull in satin nickel with a 2 inch bar width. The Schaub 211048 itself is a 5 inch center-to-center edge pull with a 7-7/8 inch overall length, so pairing it with any of those means running two different hole patterns on the job.

The 211048 is part of Schaub's Borde collection, so matching within Borde is the way to keep the same profile and finish across a run. If you need knobs alongside, Emtek's Schaub Collection pieces (the Emtek 8405 Select, Alexander, and Art Deco cabinet pulls) are the adjacent lines to look at for coordinating hardware.

It is ordered per piece, one finish at a time, from the five Borde finishes. For multi-family or spec work, quantity out each opening and keep the finish code (PC, GR, MB, MW, or NS) on the order so a run doesn't arrive mixed.

The Schaub 211048 Borde edge pull is offered in Matte Black, along with Polished Chrome, Gold Rande, Matte White and Nickel Silk, so a matte black specification is met without switching brands. If satin nickel is the target instead, the Orca Hardware CK-12001 T-pull bar is a steel pull supplied in satin nickel, though it is a face-mounted bar pull rather than an edge pull.