Schaub 788-5 5" Center to Center Vinci Cabinet Pull

It uses 8/32 thread screws, supplied 1 inch long. That 1 inch covers a standard 3/4 inch drawer front or door with thread to spare. If you are mounting to a thicker front, a 1 inch applied-molding face, or through a false front plus box, you will need longer 8-32 machine screws - the thread size stays the same, only the length changes.

No. The 788-5 is fixed at 5 inch centers and will not reach 3 or 4 inch holes without redrilling the fronts. If you are not redrilling, look at a pull made for your spacing: Trimco 553 Series drawer pulls are 3 inch centers, and the Trimco 562 Series comes in 3-1/2 inch, 4 inch and 96mm. The Omnia 1968/102 is a 4 inch center-to-center pull.

The Schaub 788-5 is fixed at 5 inch center to center with a 5-5/16 inch overall length, so it will not drop into a narrower drilled drawer front. For shorter spacing, the Trimco 562 Series drawer pulls come in 3-1/2 inch, 4 inch and 96mm center to center, and the Trimco 553 Series is a 3 inch center to center drawer pull. The Deltana SBP35 is a 3-1/2 inch heavy-duty solid brass square bar pull if you want a straight bar profile on the smaller drawers.

The Schaub 788-5 Vinci is drilled at 5 inch center to center, so it will not land on 4 inch holes. The Omnia 1968/102 is a modern forged solid brass cabinet pull with 4 inch center to center spacing, and the Trimco 562 Series drawer pulls include a 4 inch center to center option. Either one picks up existing 4 inch boring.

Projection is 1-1/4 inches. That is enough grip clearance for a gloved hand, and it matters on inset or full-overlay doors next to a wall return or an appliance panel - measure the swing path before you commit, because a 1-1/4 inch projection on a door beside a perpendicular run can catch. The bar itself is 3/8 inch.

Four bronze finishes: Antique Bronze (AZ), Black Bronze (BB), Natural Bronze (NB), and Polished White Bronze (PWB). All four are living finishes on cast bronze, so they shift with handling over time. For a multi-unit or whole-house job, order the full quantity in one go and keep a spare or two - bronze from different runs can read slightly different.

Cast bronze, not plated pot metal. That is why it takes the antique, black, natural and polished white bronze finishes as real bronze finishes rather than a coating, and why it holds up in a rental kitchen or a hospitality build where hardware gets pulled thousands of times.

For a clean contemporary look, the Omnia 1968, 1969, 1970 and 1971 Cabinet Pull series are forged solid brass modern pulls - the Omnia 1970 also runs a 1-1/4 inch projection, so it stands off the face the same amount as the Vinci. The Deltana SBP35 is a square bar pull in solid brass at 3-1/2 inch centers. If you want to stay in the Schaub design language, Emtek carries the Schaub Collection under its SELECT line, including the Bar, Alexander and Art Deco cabinet pulls.

Emtek carries the Schaub Collection under its own part numbers, including the Emtek 8405 Select cabinet pulls, the Alexander cabinet pull, the Art Deco cabinet pull, and the Bar cabinet pull. Those are separate series from the Vinci collection that the Schaub 788-5 belongs to, so they are a route to Schaub-family cabinet hardware rather than a drop-in match for the Vinci profile. If the 5 inch center to center spacing and the cast bronze rustic finish range are what you are matching, stay with the 788-5.

No. The Orca Hardware Bachelor Collection CK-15030 and the ring-style CK-16030 are round cabinet knobs at 1-1/4 inch diameter, and the Blackcomb CK-17025 is a 25mm square knob. A knob takes a single center hole, while the Schaub 788-5 is a two-post pull drilled at 5 inch center to center with 8/32 thread by 1 inch screws. Swapping a knob onto a door already bored for the 788-5 leaves an exposed second hole.

The Schaub 788-5 Vinci is cast bronze, offered in Antique Bronze, Black Bronze, Natural Bronze and Polished White Bronze. If you want a steel or heavier-duty bar instead, the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel, and the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inch. Both read as straight bar profiles rather than the rustic Vinci shape, so expect a different look across the run.

Yes, Schaub publishes a Proposition 65 warning covering this cast bronze pull. Contractors and procurement buyers shipping into California should plan on the warning accompanying the product; Schaub's product stewardship page is the source of record for the specific warning language.