Schaub 877 4" Center to Center Empire Cabinet Pull

The 877 Empire pull takes 8/32 thread screws, supplied at 1 inch long. That length covers typical 5/8 to 3/4 inch drawer fronts and doors. If you are going through a thicker front, a false front, or a front plus an applied panel, you will need longer 8/32 machine screws, since the thread size stays the same and only the length changes.

The base material is zinc, finished in one of ten platings. If your spec or client calls for forged solid brass, the Omnia 1968/102 is a solid brass pull at the same 4 inch center-to-center spacing, and Deltana's SBP35 modern square bar pull is solid brass at 3-1/2 inch. Zinc is the more common base for a decorative transitional pull at this size.

No. The 877 Empire pull is drilled at 4 inch centers only, so it will not land on 3 inch holes without redrilling. For a 3 inch center-to-center replacement, Trimco's 553 Series drawer pull is 3 inch, and the Trimco 562 Series covers 3-1/2 inch, 4 inch, and 96mm options if you have a mix of spacings across a facility.

The Omnia 1968/102 modern cabinet pull is forged solid brass and uses the same 4 inch center-to-center spacing, so it drops into the existing bore pattern without redrilling. The Schaub 877 Empire pull has a zinc base material with a 1-1/4 inch projection and a transitional styling; the Omnia 1968/102 is a modern profile. Match the bore spacing first, then decide on the look.

The Trimco 562 series drawer pull is offered in 3-1/2 inch, 4 inch, and 96mm center-to-center options, so the 4 inch version shares bore spacing with the Schaub 877 Empire pull. It is a commercial drawer pull line rather than a decorative cabinet collection. If your spec is 3 inch center to center instead, the Trimco 553 series covers that spacing.

Projection is 1-1/4 inches, so the pull stands that far off the face of the door or drawer. Worth checking on galley kitchens, inside corners, and any run where a door swings past an adjacent appliance handle or wall return. The pull body itself measures 7/8 inch at the base.

Ten finishes: Satin Nickel, Polished Chrome, Ancient Bronze, Antique Nickel, Brushed Bronze, Brushed Nickel, Empire Bronze, Matte Black, Polished Nickel, and Signature Satin Brass. That spread lets you match warm brass and bronze schemes or stay in the nickel and chrome family, and Matte Black covers the current dark-trim look. For a multi-unit or whole-house job, order all the pulls in one go so the finish batch is consistent.

The 877 is a transitional-style pull, so it sits between modern bar hardware and traditional ornament. If you want something more contemporary, Omnia's 1970 modern pull has the same 1-1/4 inch projection, and the 1969 and 1971 come in at 1-3/16 inch, all forged solid brass. Emtek's Schaub Collection offers the Alexander, Art Deco, and Bar cabinet pulls if you want a different look under related styling. Orca's CK-12001 T-pull bar is the plain steel bar-pull route.

The Omnia 1970 modern cabinet pull is listed at a 1-1/4 inch projection, the same standoff from the door face as the Schaub 877 Empire pull. That matters where a pull sits near an appliance panel or an inside corner and knuckle clearance is tight. The Omnia 1969 and Omnia 1971 both sit slightly closer at 1-3/16 inch projection if you need to shave clearance.

The Schaub 877 Empire pull is a two-hole pull on 4 inch centers and needs a matching bore pair. For a single-hole opening, Orca Hardware's Bachelor Collection round cabinet knob at 1-1/4 inch diameter, the CK-16030 round ring knob at 1-1/4 inch diameter, or the CK-17025 Blackcomb square knob at 25mm diameter all mount on one screw. Those are knobs rather than pulls, so grip style changes.

Yes. It is a cabinet pull in the Schaub Empire collection, and a 4 inch center-to-center pull is a normal choice for both upper and base door fronts and for small to mid-size drawers. On wide drawers, many installers run two pulls, or step up to a longer center-to-center pull in the same collection to keep the proportion right.

Yes. Schaub publishes a Proposition 65 warning for this pull through its product stewardship page, which matters for anyone shipping into or specifying in California. The relevant disclosure is linked from the product details.