Schaub 915 2" Center to Center French Court Cabinet Pull

Yes, if your existing holes are 2 inches apart on center. The Schaub 915 is drilled at 2 inch center-to-center, which is one of the standard cup pull spacings, so it drops onto drawers already bored at 2 inches without new holes. If your drawers are bored at 3 inches or 96mm, you would need to fill and redrill or pick a pull with that spacing.

The Schaub 915 is fixed at 2 inch center-to-center, so it will not land on 3 inch holes. The Trimco 553 Series drawer pull is made at 3 inch center-to-center. If your set includes wider drawers, the Trimco 562 Series covers 3-1/2 inch, 4 inch, and 96mm center-to-center, and the Omnia 1968/102 is a forged solid brass pull at 4 inch center-to-center.

The Schaub 915 is a cup pull in solid brass with 2 inch center-to-center spacing, so it seats against the drawer face and is grasped from underneath. For a bar-style grip instead, the Emtek Bar Cabinet Pull in the Bar series is a straight bar pull, and the Deltana SBP35 Modern Square Bar Pull is a 3-1/2 inch square bar pull in solid brass. Both change the look from traditional cup to modern bar, and neither matches the 915's 2 inch hole spacing, so plan on new drilling.

No. The Schaub 915 cup pull mounts on two holes at 2 inch center-to-center. For single-hole drawer fronts, use a knob: the Orca Hardware Bachelor Collection round cabinet knob is 1-1/4 inch diameter, the Bachelor Collection round ring knob is also 1-1/4 inch diameter, and the Blackcomb Collection square knob is 25mm diameter.

Three: Monticello Brass (MBR), Monticello Silver (MSL), and White Brass (WB). All three are on the same solid brass casting, so if you are mixing warm and cool tones across an island and perimeter you can hold the same profile and just change finish.

Solid brass is the base material, not cast zinc with a coating. That matters on kitchen and bath drawers that get handled wet and on rental or hospitality cabinetry where plated zinc pulls tend to wear through at the finger contact point first.

A cup pull is a closed-back half shell you hook your fingers up into, so it only works pulling one direction and is normally reserved for drawers, not doors. The 915 is a cup pull in the French Court collection, Symphony Elegance styling. If you want something you can grab from any angle, or you are doing cabinet doors as well as drawers, a bar pull such as the Deltana SBP35 Modern Square Bar Pull or the Emtek Bar Cabinet Pull is the better fit. Many kitchens mix the two, cups on drawers and bars or knobs on doors.

They are related but not interchangeable. The Schaub 915 is the French Court collection cup pull, 1-3/8 inch by 4-1/2 inch overall with 7/8 inch projection. Emtek sells cabinet pulls under a Schaub Collection heading, including the Emtek 8405 in the Emtek SELECT series, the Alexander series, and the Art Deco series, each cataloged as a cabinet knob/pull. Those are separate designs with their own patterns, so ordering an Emtek Schaub Collection pull will not reproduce the French Court cup profile.

The Schaub 915 projects 7/8 inch from the face, which keeps a cup pull close to the drawer front. Among the Omnia modern pulls, the 1969 and 1971 are forged solid brass at 1-3/16 inch projection and the 1970 is forged solid brass at 1-1/4 inch projection, so all three stand off farther. Projection matters where drawers sit next to an appliance or in a tight walkway.

The Schaub 915 is solid brass and is offered in Monticello Brass, Monticello Silver, and White Brass, which suits decorative millwork. If you want a heavier utility grip, the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inch, and the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel. Those trade the traditional cup look for a plainer bar profile.

Cup pulls are typically paired with knobs on doors, and the 915 is no exception since it only pulls in one direction. Schaub styling is also carried through Emtek's Schaub Collection, including the Emtek 8405 Select cabinet knob/pull and the Alexander and Art Deco cabinet pulls, if you want a related look on the doors. For a plainer knob, Orca's Bachelor Collection round knob is 1-1/4 inch diameter.

Yes. Schaub publishes a Proposition 65 warning for this pull through its product stewardship page, which is standard for solid brass hardware sold into California. Procurement teams that need the notice on file can pull it from Schaub's stewardship listing.