Schaub 942S 3" Center to Center Small Wine Bottle Cabinet Pull

Yes. The 942S is drilled on 3 inch centers, which is one of the standard cabinet pull spacings, so it goes straight onto doors or drawer fronts already bored at 3 inches with no new holes. Mounting is 8/32 thread with 1 inch screws.

The 942S is a figural wine bottle from Schaub's Wine Themes collection in the Symphony Inlays style, so it reads decorative rather than minimal. For a straight bar on the same 3 inch spacing, the Trimco 553 Series drawer pull is offered at 3 inch center to center. If you want a larger spacing, the Trimco 562 Series covers 3-1/2 inch, 4 inch, and 96mm, and the Deltana SBP35 is a 3-1/2 inch square bar pull in solid brass.

The Schaub 942S is fixed at 3 inch center-to-center, so it will not land on wider drilling. The Trimco 562 Series drawer pull is offered in 3-1/2 inch, 4 inch and 96mm center-to-center, and the Omnia 1968/102 modern cabinet pull is a forged solid brass pull on 4 inch center-to-center spacing. Either covers the wider hole patterns the 942S cannot reach.

The Schaub 942S projects 1-3/4 inch off the face of the door. Where sleeves and hips catch in a narrow aisle, the Omnia 1969 and Omnia 1971 modern cabinet pulls are forged solid brass at 1-3/16 inch projection, and the Omnia 1970 is forged solid brass at 1-1/4 inch projection - all three sit noticeably closer to the door face.

The 942S ships with 8/32 x 1 inch screws, which covers standard 3/4 inch cabinet doors and drawer fronts with a little thread to spare. If you are mounting through a thicker slab or an applied front, you will need longer 8/32 machine screws, since that is the thread the pull is tapped for.

Projection is 1-3/4 inches from the face of the door, with a 3/8 inch base and 7/8 inch overall on the mounting posts. That gives full finger clearance, which matters on inset doors or anywhere a pull sits close to a return wall or adjacent cabinet.

Two: Estate Dover (ED) and Satin Nickel (SN). If you are outfitting a wine room or bar run and already have satin nickel appliance and faucet finishes, SN is the match; ED is the darker, antiqued option for a stained or furniture-grade cabinet.

Solid brass. That matters in a wine cellar or basement bar where humidity is higher than the rest of the house, and it is why the pull takes a real plated or antiqued finish rather than a coating over pot metal.

It is a two-post pull, bored 3 inches apart, not a single-hole knob. If your doors are drilled for a single knob you would need to redrill, or use a knob instead: the Orca Hardware Bachelor Collection round knob is 1-1/4 inch diameter and single-hole.

The Schaub 942S is a decorative Symphony Inlays wine bottle pull in solid brass, aimed at wine rooms and residential millwork. For back-of-house or heavy-use cabinetry, the Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inch, and the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel. Both are plain bar profiles with no figural detail to snag on.

They are related lines but not drop-in equals. The Schaub 942S is a Wine Themes figural pull with 3 inch center-to-center spacing and 8/32 thread by 1 inch screws. The Emtek Schaub Collection offerings - the Emtek 8405 Select, the Alexander, the Art Deco and the Bar cabinet pulls - are catalogued as cabinet knob/pull items in their own series, so the hole spacing has to be matched series by series rather than assumed from the 942S.

No. The Schaub 942S mounts on two holes at 3 inch center-to-center. The Orca Hardware Bachelor CK-15030 round knob and CK-16030 round ring knob are 1-1/4 inch diameter cabinet knobs, and the Blackcomb CK-17025 is a 25mm square cabinet knob - all single-hole knobs. Swapping to any of them leaves an open second hole in the drawer front.

That is the usual way it is specified. The 942S is a decorative accent pull for wine storage and bar cabinetry, and many designers run it only on the wine cabinet doors while the rest of the run gets a plain bar. Emtek's Schaub Collection carries the Bar and Alexander cabinet pulls if you want the plain hardware from the same design house.

The Schaub 942S wine bottle pull is offered in Estate Dover and Satin Nickel. If the rest of the run needs to read satin nickel, the Orca Hardware CK-12001 T-pull bar is also offered in satin nickel, which lets a decorative wine bottle pull on the wine cabinet sit alongside plain bar pulls elsewhere in the same tone.