Schaub 960P 6" Center to Center Shell Inlay Heirloom Treasures Cabinet Pull

Emtek carries a Schaub Collection of cabinet pulls that keeps the same design lineage. The Emtek 8405 Select cabinet pulls and the Emtek Alexander cabinet pull are both part of Emtek's Schaub Collection and are catalogued as cabinet knob/pull products. The Schaub 960P itself is a solid brass pull from the Heirloom Treasures collection in the Symphony Inlays style, with 6 inch center-to-center spacing and 1-3/8 inch projection, so the Emtek Schaub Collection pieces are a design match rather than a dimensional one - confirm the center-to-center you need before ordering.

Projection is 1-3/8 inches. That's enough grip clearance for a gloved hand on a heavy drawer, but worth checking where a door swings into a wall return or against an adjacent appliance handle, since the pull adds that much to the face of the door.

Solid brass base material, in Antique Brass finish. Solid brass matters on a pull this size because the posts take the load every time someone opens a loaded drawer, and it also means the finish wears rather than flakes off a substrate.

Antique Brass (AB) only. There is one finish for the 960P, so if you're standardizing a kitchen or a millwork package you're matching everything else to Antique Brass rather than choosing from a finish range.

The 960P is a single 6 inch ctc size, so on narrow doors or small drawers you need a different piece. Emtek carries Schaub Collection cabinet hardware, including the Emtek 8405 Select cabinet knobs and pulls and the Emtek Alexander and Art Deco cabinet pulls, which cover knob and smaller pull options in the same family of styling.

The Schaub 960P is a Symphony Inlays style pull, so its face carries decorative inlay detail. If you want an unadorned solid brass bar in the same material, Omnia's modern cabinet pulls are forged solid brass: the Omnia 1968/102 has 4 inch center-to-center spacing, the Omnia 1969 and Omnia 1971 have a 1-3/16 inch projection, and the Omnia 1970 has a 1-1/4 inch projection. Deltana's SBP35 modern square bar pull is also solid brass, at 3-1/2 inches. None of these match the 960P's 6 inch center-to-center spacing, so you would be re-drilling or working from new cabinet fronts.

No - a knob mounts on a single hole, while the Schaub 960P is a two-hole pull on 6 inch center-to-center spacing with 8/32 thread x 1 inch screws. Knobs such as the Orca Hardware CK-15030 round knob at 1-1/4 inch diameter, the CK-16030 round ring knob at 1-1/4 inch diameter, and the CK-17025 Blackcomb square knob at 25mm diameter are all single-point cabinet knobs. Swapping to a knob leaves the second bore hole in the door or drawer front exposed.

The Schaub 960P is a decorative solid brass residential-style pull from the Heirloom Treasures collection. For utility cabinetry and casework, Trimco drawer pulls are the usual specification: the Trimco 553 series is offered at 3 inch center-to-center and the Trimco 562 series at 3-1/2 inch, 4 inch, and 96mm center-to-center. The Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel. All of these use shorter hole spacing than the 960P's 6 inch centers, so plan the bore pattern accordingly.

The 960P is part of Schaub's Heirloom Treasures collection in the Symphony Inlays style, a decorative shell inlay pull on a solid brass body. It's a furniture-grade appearance piece for residential kitchens, baths, vanities and built-in casework, not a high-traffic commercial or institutional pull.

It's a decorative solid brass appearance pull in a single Antique Brass finish, which suits boutique hospitality, model units and high-end residential millwork. For volume casework where you want one profile across hundreds of drawers, a plain bar pull such as the Orca Hardware CK-12001 T-pull bar in steel with satin nickel, or Trimco's 553 Series at 3 inch ctc and 562 Series with 3-1/2 inch, 4 inch and 96mm ctc options, gives you a simpler line and more size choices.

The Schaub 960P carries a shell inlay face in the Symphony Inlays style from the Heirloom Treasures collection. If you want a period look without the inlay, the Emtek Art Deco cabinet pull is part of Emtek's Schaub Collection and is catalogued as a cabinet knob/pull, and the Emtek Alexander cabinet pull is another Schaub Collection series. For a strictly contemporary alternative, the Emtek Bar cabinet pull is the straight-bar series in the same collection.

The Schaub 960P projects 1-3/8 inch off the face of the door or drawer. Among the solid brass alternatives, the Omnia 1970 is the nearest at 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 each project 1-3/16 inch. All three sit slightly closer to the cabinet face than the 960P, which matters where a pull runs next to a wall return or an appliance panel.