Schaub 662 Avalon Bay with Organic Shell Inlays 4" Center to Center Cabinet Pull

The 662 uses 8/32 thread screws in a 1 inch length. One inch handles a standard 3/4 inch drawer front or door with room for the pull post. If you are mounting through a thicker slab front, a false front plus box front, or a front with an applied panel, you will need longer 8/32 machine screws.

No. The Schaub 662 Avalon Bay pull is drilled at 4 inch center-to-center, so it will not land on 3 inch holes without redrilling. For a 3 inch center-to-center drawer pull, the Trimco 553 Series is made at 3 inch ctc. The Trimco 562 Series is offered in 3-1/2 inch, 4 inch, and 96mm ctc, so the 4 inch option of the 562 matches the Schaub 662 hole spacing directly.

The Omnia 1968/102 is a modern cabinet pull in forged solid brass with 4 inch center-to-center spacing, so it drops onto the same two bored holes as the Schaub 662 Avalon Bay pull, which is also solid brass at 4 inch center-to-center. The difference is the face: the Schaub 662 carries organic shell inlays in Tiger Penshell or White Mother of Pearl, while the Omnia 1968/102 is a plain modern bar form with no inlay.

Projection is 1-1/8 inches, and the base measures 1-1/8 inches as well. That projection gives room to get fingers behind the pull without it catching clothing in a tight galley or a narrow island run.

Two combinations. The 662-PEN-DAB pairs Tiger Penshell and Imperial Shell inlay with a Dark Hi-lited Bronze body. The 662-PN pairs White Mother of Pearl and Imperial Shell inlay with Polished Nickel. The finish choice and the shell choice are tied together, so you are picking a pair, not mixing them.

Solid brass is the base material, with natural shell inlays set into the face. For a property manager or builder spec, that matters: brass takes the hi-lited bronze and polished nickel finishes directly rather than relying on plating over zinc.

The inlays on the Avalon Bay 662 are natural shell, Imperial Shell paired with either Tiger Penshell or White Mother of Pearl. Natural shell is a decorative surface, so this is a pull for a feature kitchen, a powder room vanity, or a furniture piece rather than a rental turn or a heavy commercial installation. If you need something that shrugs off abuse, a plain solid brass bar like the Deltana SBP35 or an Omnia 1968/102 in a 4 inch center-to-center is the tougher pick.

Yes. Emtek lists several cabinet pulls under its Schaub Collection, including the Emtek 8405 Select series, the Alexander series, the Art Deco series, and the Bar series, all catalogued as cabinet knob/pull. That gives you knob and pull options within one design family. The Schaub 662 Avalon Bay itself is a pull only, in the Symphony Inlays style with organic shell inlays.

The Schaub 662 Avalon Bay is a solid brass pull with organic shell inlays, a decorative face better suited to residential and hospitality millwork. For heavier duty cycles, the Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inch, and the Orca Hardware CK-12001 T-pull bar is steel with a 2 inch bar width in satin nickel. Both present a plain bar face with no inlay to chip. Note the SBP35 is 3-1/2 inch, not the 4 inch center-to-center of the Schaub 662.

Not as a direct swap. The Orca Hardware CK-15030 and CK-16030 Bachelor Collection pieces are round cabinet knobs at 1-1/4 inch diameter, and the CK-17025 Blackcomb is a square cabinet knob at 25mm - all single-hole knobs. The Schaub 662 Avalon Bay is a two-hole pull at 4 inch center-to-center with 8/32 by 1 inch screws, so switching to a knob means filling one of the two existing bores.

The Schaub 662 Avalon Bay projects 1-1/8 inch from the face. Among comparable forged solid brass pulls, the Omnia 1969 and Omnia 1971 both project 1-3/16 inch and the Omnia 1970 projects 1-1/4 inch, so all three stand slightly further off the door than the Schaub 662 - worth checking against adjacent drawer clearance and appliance swings.

The 662 is part of Schaub's Avalon Bay collection in the Symphony Inlays style, so it coordinates with other Avalon Bay pieces. Schaub's designs are also carried through Emtek's Schaub Collection, which includes the Emtek 8405 Select cabinet pulls and knobs if you need additional shapes or sizes on the same program.

Yes. Schaub publishes a Proposition 65 warning for this pull under its product stewardship information, which is the standard disclosure for solid brass hardware sold into California.