Schaub CS412 Concealed Surface Mounted 12" Center to Center Lumiere Transitional Appliance Pull

Yes, the CS412 is drilled on 12 inch centers, so it drops onto an existing 12 inch CTC bore pattern. Overall length is 15 inches, meaning roughly an inch and a half of pull past each post, so allow for that at door edges or next to adjacent panels.

The CS412 uses 1/4-20 x 1 inch machine screws. That 1 inch length suits standard appliance panels and cabinet doors; on a thicker custom panel you will need longer 1/4-20 screws cut or sourced to the panel thickness. Note the thread is 1/4-20, not the 8-32 used on most standard cabinet pulls.

The Schaub CS412 is built as an appliance pull at 12 inch center to center with a 15 inch overall length, which is far longer than a typical drawer needs. For standard drawer fronts, the Trimco 553 Series drawer pull is offered at 3 inch center to center, and the Trimco 562 Series comes in 3-1/2 inch, 4 inch and 96mm center to center options. The Deltana SBP35 modern square bar pull is another short option at 3-1/2 inch in solid brass.

Projection is 2-1/4 inches, with a 1-1/8 inch base. That is deep enough to get a full hand behind it on a heavy refrigerator or freezer panel, but check clearance to a perpendicular wall or an island run before you commit to the location.

The mounting screws are hidden behind the posts rather than showing on the face of the pull, and the pull mounts to the surface of the panel. You still drill through the door for the 1/4-20 screws, but no fastener heads are visible on the pull itself.

Six: Polished Brass, Satin Brass, Satin Nickel, Polished Nickel, Polished Chrome, and Polished Rose Gold. If you are matching a full kitchen, pick the finish across the whole Lumiere Transitional collection so the cabinet pulls and knobs read the same as the appliance pull.

Solid brass base material. That matters on an appliance pull, which takes more pulling force than a drawer pull and is gripped every day, and it is why the finishes hold up better than plated zinc alternatives.

The CS412 is solid brass in the Lumiere Transitional collection with a 2-1/4 inch projection. If you want solid brass in a more modern profile, Omnia offers the forged solid brass 1968/102 at 4 inch center to center, and the 1969 and 1971 with a 1-3/16 inch projection, and the 1970 with a 1-1/4 inch projection. Those Omnia pulls sit much closer to the face of the door than the CS412's 2-1/4 inch projection, which matters if you need finger clearance on an appliance panel.

The Schaub CS412 is solid brass with a 1-1/8 inch base dimension. If the specification calls for steel, the Orca Hardware CK-12001 T-pull bar is a steel bar pull with a 2 inch bar width in satin nickel. It is a plain bar profile rather than the Lumiere Transitional styling of the CS412.

Emtek sells the Schaub Collection through its cabinet line, including Emtek 8405 Select, and the Alexander, Art Deco, and Bar cabinet pulls. Those are knob and pull offerings rather than long appliance pulls, so for a 12 inch center-to-center refrigerator panel the CS412 is the piece to order and the Emtek Schaub Collection pieces are what you coordinate the rest of the kitchen with.

The CS412 handles the appliance panel at 12 inch center to center. For the smaller doors around it, Orca Hardware offers the Bachelor Collection CK-15030 round knob and CK-16030 round ring knob, both 1-1/4 inch diameter, and the Blackcomb Collection CK-17025 square knob at 25mm diameter. A satin nickel CS412 is one of six finishes offered, alongside polished brass, polished chrome, polished nickel, polished rose gold and satin brass.