Schaub CS749 Concealed Surface Mounted 12" Center to Center Colonial Appliance Pull

Projection is 2-1/4 inches off the face, with 7/8 inch base dimensions at the mounting posts. That is a deep grip, which is what you want on a heavy refrigerator or freezer panel, but check your clearance to adjacent walls, door casings, and island runs before ordering.

The Schaub CS749 is a Colonial collection pull in a Traditional style, solid brass, with 12 inch center to center spacing and a 2-1/4 inch projection. For a modern look on the same solid brass footing, the Omnia 1968/102 is a modern cabinet pull in forged solid brass with 4 inch center to center spacing, and the Omnia 1970 is a modern forged solid brass pull with a 1-1/4 inch projection. Both are shorter-span pulls, so on a refrigerator or panel-front dishwasher already drilled at 12 inches on center the holes will not line up without redrilling.

The fasteners are hidden. The CS749 mounts to the face of the door or panel rather than through-bolting with visible screw heads on the front, so you see a clean post and grip with no exposed hardware. It is a face-mount installation, not a through-drilled machine screw from behind a drawer box.

Eight: Oil Rubbed Bronze, Satin Nickel, Polished Chrome, Antique Nickel, Aurora Bronze, Flat Black, Polished Nickel, and Polished Brass. For a kitchen where the rest of the cabinet hardware is already set, pick the pull finish to the existing Schaub Colonial knobs and pulls rather than to the appliance trim.

The Schaub CS749 handles the appliance panels at 12 inch center to center. For the cabinet doors and drawers around it, the Emtek Alexander Cabinet Pull and the Emtek Art Deco Cabinet Pull are both cabinet knob and pull items sold in the Schaub Collection, as is the Emtek 8405 Select cabinet pull line. Those give you a design family to run across the smaller openings while the CS749 carries the long appliance spans.

The Schaub CS749 is a solid brass Colonial appliance pull with a 2-1/4 inch projection, offered in finishes including Satin Nickel, Flat Black, Oil Rubbed Bronze, and Polished Chrome. For a plainer bar profile, the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel, and the Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inch. The Orca is steel rather than brass, and both are straight bar shapes rather than a turned Colonial profile.

The Schaub CS749 projects 2-1/4 inch from the face of the panel, which gives a full hand grip on a refrigerator door. The Omnia 1969 and Omnia 1971 modern forged solid brass pulls each carry a 1-3/16 inch projection, and the Omnia 1970 a 1-1/4 inch projection. If you are working next to a wall return or in a tight galley, the shallower Omnia profiles clear more; if the panel is heavy and needs a two-finger pull through, the deeper CS749 grip is the one to look at.

Traditional. The CS749 belongs to Schaub's Colonial collection, so it reads period rather than contemporary. If the kitchen is modern, the Omnia 1968, 1969, 1970, and 1971 series are forged solid brass modern cabinet pulls, and Deltana's SBP35 is a modern square bar pull in solid brass.