Schaub CS788-18A Concealed Surface 18" Center to Center Vinci Appliance Pull

It uses 1/4-20 thread, not the 8-32 screws that come with ordinary cabinet and drawer pulls. That is the heavier appliance-pull thread, so plan on 1/4-20 machine screws sized to your panel or door thickness. If you are swapping out a pull that used 8-32, the old screws will not thread into this one.

Projection is 2 inches from the face of the panel to the outside of the grip, with a 5/8 inch base dimension where it meets the surface. Two inches is generous grip room for a refrigerator or panel-ready freezer door, which is the point of an appliance pull versus a standard cabinet pull. Check that 2 inches of swing clearance exists against any adjacent wall or return cabinet before you commit.

The Schaub CS788-18A is an appliance pull at 18 inch center to center in cast bronze, which is far longer than a standard drawer pull. For the shorter runs, common cabinet-scale options include the Trimco 553 series drawer pulls at 3 inch center to center and the Trimco 562 series, which offers 3-1/2 inch, 4 inch, and 96mm center to center. Omnia's 1968/102 forged solid brass pull uses 4 inch center to center. Note these are brass or other finishes rather than the CS788-18A's cast bronze rustic styling, so verify the finish match before committing to a full kitchen.

The Schaub CS788-18A projects 2 inches off the face. If clearance is the constraint, the Omnia 1970 forged solid brass cabinet pull projects 1-1/4 inches, and both the Omnia 1969 and Omnia 1971 project 1-3/16 inches. Those Omnia pulls are modern styling in forged solid brass rather than the rustic cast bronze of the Vinci, and they are cabinet-scale pulls rather than appliance-length, so confirm the center to center you need before substituting.

Four bronze finishes: Antique Bronze (AZ), Black Bronze (BB), Natural Bronze (NB), and Polished White Bronze (PWB). All four are living finishes over cast bronze, so Natural and Polished White Bronze in particular will darken with handling unless they are maintained. If you are matching across a kitchen, order all the Vinci pieces in one finish code at the same time.

No. At 18 inch center-to-center with 1/4-20 threads, the CS788-18A is an appliance pull for refrigerator and freezer panels. For drawers, look at short-spread drawer pulls such as the Trimco 553 Series at 3 inch center-to-center, the Trimco 562 Series in 3-1/2 inch, 4 inch, and 96mm, or the Omnia 1968/102 at 4 inch center-to-center in forged solid brass.

No. The Schaub CS788-18A is an appliance pull with two mounting points 18 inches apart and a 1/4-20 thread, so a single-point knob will not fit the existing bore pattern. Knob options such as the Orca Hardware CK-15030 round cabinet pull knob at 1-1/4 inch diameter, the CK-16030 round ring knob at 1-1/4 inch diameter, and the CK-17025 Blackcomb square knob at 25mm diameter are single-hole cabinet knobs intended for doors and small drawers, not appliance panels.

The Schaub CS788-18A is offered in Antique Bronze (AZ), Black Bronze (BB), Natural Bronze (NB), and Polished White Bronze (PWB) over a cast bronze base. Among the alternatives, the Deltana SBP35 and the Omnia 1968/102, 1969, 1970, and 1971 pulls are solid brass or forged solid brass bodies, which take plated and living finishes rather than the cast bronze patinas used on the Vinci line. The Orca Hardware CK-12001 is steel in satin nickel, a cooler tone. If the bronze patina look is the requirement, stay within the cast bronze Vinci family.

The CS788-18A belongs to Schaub's Vinci collection in a rustic style, so the matching cabinet knobs and drawer pulls to pair with it are the other Vinci pieces in the same finish code. If you want the Schaub look on a modern rather than rustic kitchen, Emtek carries Schaub-designed collections including the Art Deco, Alexander, and Bar cabinet pulls.

Yes, Schaub publishes a Proposition 65 warning for this product, linked through their product stewardship page. California buyers specifying it on a residential or hospitality job should pull that notice for their submittal package.